Commit 9b6ef528 authored by Uri Mashiach's avatar Uri Mashiach Committed by Tom Rini

arm: am57xx: cl-som-am57x: fix Ethernet

The module is continuously rebooting with the following message:
Net:   data abort
pc : [<fff77f42>]          lr : [<fff6e32b>]
reloc pc : [<80816f42>]    lr : [<8080d32b>]
sp : fdf5ce48  ip : fdf5d79c     fp : 00000017
r10: 8083cd58  r9 : fdf5cef0     r8 : fdf5d5d0
r7 : 48485000  r6 : 400000ff     r5 : fdf5d6e0  r4 : fdf5d618
r3 : fdf5d5b4  r2 : fdf5d5d0     r1 : 643a3631  r0 : fdf5d6e0
Flags: nzCv  IRQs off  FIQs off  Mode SVC_32
Resetting CPU ...

Modifications:
* Enable Ethernet configuration in the SPL.
* Update PINMUX of PHY enable GPIO.
Signed-off-by: default avatarUri Mashiach <uri.mashiach@compulab.co.il>
Reviewed-by: default avatarTom Rini <trini@konsulko.com>
parent e5ec4815
......@@ -102,7 +102,7 @@ static const struct pad_conf_entry cl_som_am57x_padconf_ethernet[] = {
{VIN2A_D22, (IEN | PDIS | PTD | M3) }, /* VIN2A_D22.RGMII1_RXD1 */
{VIN2A_D23, (IEN | PDIS | PTD | M3) }, /* VIN2A_D23.RGMII1_RXD0 */
/* Eth PHY1 reset GPIOs*/
{VIN1B_CLK1, (IDIS | PDIS | PTD | M14)}, /* VIN1B_CLK1.GPIO2_31 */
{VIN2A_CLK0, (IDIS | PDIS | PTD | M14)}, /* VIN2A_CLK0.GPIO3_28 */
};
#define SET_MUX(mux_array) do_set_mux32((*ctrl)->control_padconf_core_base, \
......
......@@ -103,6 +103,8 @@
#define CONFIG_USB_ETHER_ASIX
#define CONFIG_USB_ETHER_MCS7830
#endif /* !CONFIG_SPL_BUILD */
/* CPSW Ethernet */
#define CONFIG_DRIVER_TI_CPSW
#define CONFIG_MII
......@@ -120,8 +122,6 @@
#define CONFIG_BOOTP_SUBNETMASK
#define CONFIG_NET_RETRY_COUNT 10
#endif /* !CONFIG_SPL_BUILD */
/* Default environment */
#undef CONFIG_EXTRA_ENV_SETTINGS
#define CONFIG_EXTRA_ENV_SETTINGS \
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment