Commit a200a7c0 authored by Wolfgang Denk's avatar Wolfgang Denk

Update CHANGELOG; prepare Prepare v2009.11

Signed-off-by: default avatarWolfgang Denk <wd@denx.de>
parent f9476902
commit f9476902b789b0481b9df49af88d6ca94fb16fa0
Author: Peter Tyser <ptyser@xes-inc.com>
Date: Tue Dec 15 12:10:47 2009 -0600
mpc85xx, mpc86xx: Fix gd->cpu pointer after relocation
The gd->cpu pointer is set to an address located in flash when the
probecpu() function is called while U-Boot is executing from flash.
This pointer needs to be updated to point to an address in RAM after
relocation has occurred otherwise Linux may not be able to boot due to
"fdt board" crashing if flash has been erased or changed.
This bug was introduced in commit
a0e2066f392782730f0398095e583c87812d97f2.
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Reported-by: Ed Swarthout <Ed.Swarthout@freescale.com>
Tested-by: Kumar Gala <galak@kernel.crashing.org>
Tested on MPC8527DS.
Tested by: Ed Swarthout <Ed.Swarthout@freescale.com>
commit 3363a34b9eeda9783afcbbed5cdd738926d1f4bf
Author: Peter Tyser <ptyser@xes-inc.com>
Date: Sun Dec 13 17:58:34 2009 -0600
MVBLUE: Remove CONFIG_CMD_IRQ
Neither the MVBLUE nor its underlying architecture implement the
do_irqinfo() function which is required when CONFIG_CMD_IRQ is defined.
This change fixes the following MVBLUE compiler error:
-> ./MAKEALL MVBLUE
Configuring for MVBLUE board...
common/libcommon.a(cmd_irq.o):(.u_boot_cmd+0x24): undefined reference to `do_irqinfo'
make: *** [u-boot] Error 1
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Acked-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
commit 18e8ad60ee87431c01cc2686985b60cc54f5dd3b
Author: Detlev Zundel <dzu@denx.de>
Date: Mon Dec 14 17:54:40 2009 +0100
imx27lite: Reenable MTD support on NOR flash.
The support for this was silently dropped by a configuration
split during the merge of the imx27lite board support in commit
864aa034f3a0e10ce710e8bbda171df3cab59414 (cmd_mtdparts: Move to common
handling of FLASH devices via MTD layer).
Signed-off-by: Detlev Zundel <dzu@denx.de>
commit f4cfe42758192d09f8375e384cc000aa70d97029
Author: Stefan Roese <sr@denx.de>
Date: Wed Dec 9 09:01:43 2009 +0100
nand: Fix access to last block in NAND devices
Currently, the last block of NAND devices can't be accessed. This patch
fixes this issue by correcting the boundary checking (off-by-one error).
Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Scott Wood <scottwood@freescale.com>
Cc: Wolfgang Denk <wd@denx.de>
commit 3b887ca8ce72cc12129183538f6e828db13f4867
Author: Peter Korsgaard <jacmet@sunsite.dk>
Date: Tue Dec 8 22:20:34 2009 +0100
mpc83xx: boot time regression, move LCRR setup back to cpu_init_f
Commit c7190f02 (retain POR values of non-configured ACR, SPCR, SCCR,
and LCRR bitfields) moved the LCRR assignment to after relocation
to RAM because of the potential problem with changing the local bus
clock while executing from flash.
This change unfortunately adversely affects the boot time, as running
all code up to cpu_init_r can cause significant slowdown.
E.G. on a 8347 board a bootup time increase of ~600ms has been observed:
0.020 CPU: e300c1, MPC8347_PBGA_EA, Rev: 3.0 at 400 MHz, CSB: 266.667 MHz
0.168 RS: 232
0.172 I2C: ready
0.176 DRAM: 64 MB
1.236 FLASH: 32 MB
Versus:
0.016 CPU: e300c1, MPC8347_PBGA_EA, Rev: 3.0 at 400 MHz, CSB: 266.667 MHz
0.092 RS: 232
0.092 I2C: ready
0.096 DRAM: 64 MB
0.644 FLASH: 32 MB
So far no boards have needed the late LCRR setup, so simply revert it
for now - If it is needed at a later time, those boards can either do
their own final LCRR setup in board code (E.G. in board_early_init_r),
or we can introduce a CONFIG_SYS_LCRR_LATE config option to only do
the setup in cpu_init_r.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
commit 386118a896554b13f14ad0f82356276988f7de82
Author: Michal Simek <monstr@monstr.eu>
Date: Tue Dec 8 09:12:49 2009 +0100
microblaze: Correct ffs regression for Microblaze
We are using generic implementation of ffs. This should
be part of Simon's commit 0413cfecea350000eab5e591a0965c3e3ee0ff00
Here is warning message which this patch removes.
In file included from /tmp/u-boot-microblaze/include/common.h:38,
from cmd_mtdparts.c:87:
/tmp/u-boot-microblaze/include/linux/bitops.h:123:1: warning: "ffs" redefined
In file included from /tmp/u-boot-microblaze/include/linux/bitops.h:110,
from /tmp/u-boot-microblaze/include/common.h:38,
from cmd_mtdparts.c:87:
/tmp/u-boot-microblaze/include/asm/bitops.h:269:1:
warning: this is the location of the previous definition
Signed-off-by: Michal Simek <monstr@monstr.eu>
commit 8fe7b29f9811322931f0192a56431edcf819d6b9
Author: Graeme Smecher <graeme.smecher@mail.mcgill.ca>
Date: Mon Dec 7 08:09:57 2009 -0800
microblaze: Stop stack clobbering in microblaze-generic.
A typo caused the stack and malloc regions to overlap, which prevented
mem_malloc_init() from returning. This commit makes the memory layout match
the example described in include/configs/microblaze-generic.h
Signed-off-by: Graeme Smecher <graeme.smecher@mail.mcgill.ca>
Signed-off-by: Michal Simek <monstr@monstr.eu>
commit 0fc52948bda0734431cb528ee4fd82f1dec8c7b5
Author: Wolfgang Denk <wd@denx.de>
Date: Mon Dec 7 23:14:13 2009 +0100
Update CHANGELOG, prepare -rc2
Signed-off-by: Wolfgang Denk <wd@denx.de>
commit f2352877cb2daac88115192fb09991a2397d0b27
Author: Peter Tyser <ptyser@xes-inc.com>
Date: Sun Dec 6 23:58:28 2009 -0600
......@@ -24,7 +24,7 @@
VERSION = 2009
PATCHLEVEL = 11
SUBLEVEL =
EXTRAVERSION = -rc2
EXTRAVERSION =
ifneq "$(SUBLEVEL)" ""
U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
else
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment