Commit a2580ebb authored by Masahiro Yamada's avatar Masahiro Yamada Committed by Tom Rini

kconfig: remove mkconfig and boards.cfg

The old configuration script is no longer necessary.
Nor is boards.cfg a primary database.
We can generate it with the genboardscfg.py tool
based on the latest Kconfig, defconfig and MAINTAINERS.
Signed-off-by: default avatarMasahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: default avatarSimon Glass <sjg@chromium.org>
parent 3c08e8b8
......@@ -34,6 +34,7 @@
/SPL
/System.map
/u-boot*
/boards.cfg
#
# git files that we don't want to ignore even it they are dot-files
......
This source diff could not be displayed because it is too large. You can view the blob instead.
#!/bin/sh -e
# Script to create header files and links to configure
# U-Boot for a specific board.
#
# Parameters: Target Architecture CPU Board [VENDOR] [SOC]
#
# (C) 2002-2013 DENX Software Engineering, Wolfgang Denk <wd@denx.de>
#
# SPDX-License-Identifier: GPL-2.0+
#
APPEND=no # Default: Create new config file
BOARD_NAME="" # Name to print in make output
TARGETS=""
arch=""
cpu=""
board=""
vendor=""
soc=""
options=""
if [ \( $# -eq 2 \) -a \( "$1" = "-A" \) ] ; then
# Automatic mode
line=`awk '($0 !~ /^#/ && $7 ~ /^'"$2"'$/) { print $1, $2, $3, $4, $5, $6, $7, $8 }' $srctree/boards.cfg`
if [ -z "$line" ] ; then
echo "make: *** No rule to make target \`$2_config'. Stop." >&2
exit 1
fi
set ${line}
# add default board name if needed
[ $# = 3 ] && set ${line} ${1}
fi
while [ $# -gt 0 ] ; do
case "$1" in
--) shift ; break ;;
-a) shift ; APPEND=yes ;;
-n) shift ; BOARD_NAME="${7%_config}" ; shift ;;
-t) shift ; TARGETS="`echo $1 | sed 's:_: :g'` ${TARGETS}" ; shift ;;
*) break ;;
esac
done
[ $# -lt 7 ] && exit 1
[ $# -gt 8 ] && exit 1
# Strip all options and/or _config suffixes
CONFIG_NAME="${7%_config}"
[ "${BOARD_NAME}" ] || BOARD_NAME="${7%_config}"
arch="$2"
cpu=`echo $3 | awk 'BEGIN {FS = ":"} ; {print $1}'`
spl_cpu=`echo $3 | awk 'BEGIN {FS = ":"} ; {print $2}'`
if [ "$cpu" = "-" ] ; then
cpu=
fi
[ "$6" != "-" ] && board="$6"
[ "$5" != "-" ] && vendor="$5"
[ "$4" != "-" ] && soc="$4"
[ $# -gt 7 ] && [ "$8" != "-" ] && {
# check if we have a board config name in the options field
# the options field mave have a board config name and a list
# of options, both separated by a colon (':'); the options are
# separated by commas (',').
#
# Check for board name
tmp="${8%:*}"
if [ "$tmp" ] ; then
CONFIG_NAME="$tmp"
fi
# Check if we only have a colon...
if [ "${tmp}" != "$8" ] ; then
options=${8#*:}
TARGETS="`echo ${options} | sed 's:,: :g'` ${TARGETS}"
fi
}
if [ "${ARCH}" -a "${ARCH}" != "${arch}" ]; then
echo "Failed: \$ARCH=${ARCH}, should be '${arch}' for ${BOARD_NAME}" 1>&2
exit 1
fi
#
# Test above needed aarch64, now we need arm
#
if [ "${arch}" = "aarch64" ]; then
arch="arm"
fi
if [ "$options" ] ; then
echo "Configuring for ${BOARD_NAME} - Board: ${CONFIG_NAME}, Options: ${options}"
else
echo "Configuring for ${BOARD_NAME} board..."
fi
#
# Create link to architecture specific headers
#
if [ -n "$KBUILD_SRC" ] ; then
mkdir -p ${objtree}/include
LNPREFIX=${srctree}/arch/${arch}/include/asm/
cd ${objtree}/include
mkdir -p asm
else
cd arch/${arch}/include
fi
rm -f asm/arch
if [ "${soc}" ] ; then
ln -s ${LNPREFIX}arch-${soc} asm/arch
elif [ "${cpu}" ] ; then
ln -s ${LNPREFIX}arch-${cpu} asm/arch
fi
if [ -z "$KBUILD_SRC" ] ; then
cd ${srctree}/include
fi
#
# Create include file for Make
#
( echo "ARCH = ${arch}"
if [ ! -z "$spl_cpu" ] ; then
echo 'ifeq ($(CONFIG_SPL_BUILD),y)'
echo "CPU = ${spl_cpu}"
echo "else"
echo "CPU = ${cpu}"
echo "endif"
else
echo "CPU = ${cpu}"
fi
echo "BOARD = ${board}"
[ "${vendor}" ] && echo "VENDOR = ${vendor}"
[ "${soc}" ] && echo "SOC = ${soc}"
exit 0 ) > config.mk
# Assign board directory to BOARDIR variable
if [ -z "${vendor}" ] ; then
BOARDDIR=${board}
else
BOARDDIR=${vendor}/${board}
fi
#
# Create board specific header file
#
if [ "$APPEND" = "yes" ] # Append to existing config file
then
echo >> config.h
else
> config.h # Create new config file
fi
echo "/* Automatically generated - do not edit */" >>config.h
for i in ${TARGETS} ; do
i="`echo ${i} | sed '/=/ {s/=/ /;q; } ; { s/$/ 1/; }'`"
echo "#define CONFIG_${i}" >>config.h ;
done
echo "#define CONFIG_SYS_ARCH \"${arch}\"" >> config.h
echo "#define CONFIG_SYS_CPU \"${cpu}\"" >> config.h
echo "#define CONFIG_SYS_BOARD \"${board}\"" >> config.h
[ "${vendor}" ] && echo "#define CONFIG_SYS_VENDOR \"${vendor}\"" >> config.h
[ "${soc}" ] && echo "#define CONFIG_SYS_SOC \"${soc}\"" >> config.h
[ "${board}" ] && echo "#define CONFIG_BOARDDIR board/$BOARDDIR" >> config.h
cat << EOF >> config.h
#include <config_cmd_defaults.h>
#include <config_defaults.h>
#include <configs/${CONFIG_NAME}.h>
#include <asm/config.h>
#include <config_fallbacks.h>
#include <config_uncmd_spl.h>
EOF
exit 0
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment