Commit a43febde authored by Khoronzhuk, Ivan's avatar Khoronzhuk, Ivan Committed by Tom Rini

soc: keystone_serdes: create a separate SGMII SerDes driver

This patch split the Keystone II SGMII SerDes related code from
Ethernet driver and create a separate SGMII SerDes driver.
The SerDes driver can be used by others keystone subsystems
like PCI, sRIO, so move it to driver/soc/keystone directory.

Add soc specific drivers directory like in the Linux kernel.
It is going to be used by keysotone soc specific drivers.
Signed-off-by: default avatarHao Zhang <hzhang@ti.com>
Signed-off-by: default avatarIvan Khoronzhuk <ivan.khoronzhuk@ti.com>
parent 497e9e03
/*
* Texas Instruments Keystone SerDes driver
*
* (C) Copyright 2014
* Texas Instruments Incorporated, <www.ti.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __TI_KEYSTONE_SERDES_H__
#define __TI_KEYSTONE_SERDES_H__
void ks2_serdes_sgmii_156p25mhz_setup(void);
#endif /* __TI_KEYSTONE_SERDES_H__ */
......@@ -19,3 +19,5 @@ obj-$(CONFIG_QE) += qe/
obj-y += memory/
obj-y += pwm/
obj-y += input/
# SOC specific infrastructure drivers.
obj-y += soc/
......@@ -14,6 +14,7 @@
#include <malloc.h>
#include <asm/ti-common/keystone_nav.h>
#include <asm/ti-common/keystone_net.h>
#include <asm/ti-common/keystone_serdes.h>
unsigned int emac_open;
static unsigned int sys_has_mdio = 1;
......@@ -38,6 +39,7 @@ struct rx_buff_desc net_rx_buffs = {
};
static void keystone2_eth_mdio_enable(void);
static void keystone2_net_serdes_setup(void);
static int gen_get_link_speed(int phy_addr);
......@@ -406,7 +408,7 @@ static int keystone2_eth_open(struct eth_device *dev, bd_t *bis)
sys_has_mdio =
(eth_priv->sgmii_link_type == SGMII_LINK_MAC_PHY) ? 1 : 0;
sgmii_serdes_setup_156p25mhz();
keystone2_net_serdes_setup();
if (sys_has_mdio)
keystone2_eth_mdio_enable();
......@@ -552,142 +554,7 @@ int keystone2_emac_initialize(struct eth_priv_t *eth_priv)
return 0;
}
void sgmii_serdes_setup_156p25mhz(void)
static void keystone2_net_serdes_setup(void)
{
unsigned int cnt;
/*
* configure Serializer/Deserializer (SerDes) hardware. SerDes IP
* hardware vendor published only register addresses and their values
* to be used for configuring SerDes. So had to use hardcoded values
* below.
*/
clrsetbits_le32(0x0232a000, 0xffff0000, 0x00800000);
clrsetbits_le32(0x0232a014, 0x0000ffff, 0x00008282);
clrsetbits_le32(0x0232a060, 0x00ffffff, 0x00142438);
clrsetbits_le32(0x0232a064, 0x00ffff00, 0x00c3c700);
clrsetbits_le32(0x0232a078, 0x0000ff00, 0x0000c000);
clrsetbits_le32(0x0232a204, 0xff0000ff, 0x38000080);
clrsetbits_le32(0x0232a208, 0x000000ff, 0x00000000);
clrsetbits_le32(0x0232a20c, 0xff000000, 0x02000000);
clrsetbits_le32(0x0232a210, 0xff000000, 0x1b000000);
clrsetbits_le32(0x0232a214, 0x0000ffff, 0x00006fb8);
clrsetbits_le32(0x0232a218, 0xffff00ff, 0x758000e4);
clrsetbits_le32(0x0232a2ac, 0x0000ff00, 0x00004400);
clrsetbits_le32(0x0232a22c, 0x00ffff00, 0x00200800);
clrsetbits_le32(0x0232a280, 0x00ff00ff, 0x00820082);
clrsetbits_le32(0x0232a284, 0xffffffff, 0x1d0f0385);
clrsetbits_le32(0x0232a404, 0xff0000ff, 0x38000080);
clrsetbits_le32(0x0232a408, 0x000000ff, 0x00000000);
clrsetbits_le32(0x0232a40c, 0xff000000, 0x02000000);
clrsetbits_le32(0x0232a410, 0xff000000, 0x1b000000);
clrsetbits_le32(0x0232a414, 0x0000ffff, 0x00006fb8);
clrsetbits_le32(0x0232a418, 0xffff00ff, 0x758000e4);
clrsetbits_le32(0x0232a4ac, 0x0000ff00, 0x00004400);
clrsetbits_le32(0x0232a42c, 0x00ffff00, 0x00200800);
clrsetbits_le32(0x0232a480, 0x00ff00ff, 0x00820082);
clrsetbits_le32(0x0232a484, 0xffffffff, 0x1d0f0385);
clrsetbits_le32(0x0232a604, 0xff0000ff, 0x38000080);
clrsetbits_le32(0x0232a608, 0x000000ff, 0x00000000);
clrsetbits_le32(0x0232a60c, 0xff000000, 0x02000000);
clrsetbits_le32(0x0232a610, 0xff000000, 0x1b000000);
clrsetbits_le32(0x0232a614, 0x0000ffff, 0x00006fb8);
clrsetbits_le32(0x0232a618, 0xffff00ff, 0x758000e4);
clrsetbits_le32(0x0232a6ac, 0x0000ff00, 0x00004400);
clrsetbits_le32(0x0232a62c, 0x00ffff00, 0x00200800);
clrsetbits_le32(0x0232a680, 0x00ff00ff, 0x00820082);
clrsetbits_le32(0x0232a684, 0xffffffff, 0x1d0f0385);
clrsetbits_le32(0x0232a804, 0xff0000ff, 0x38000080);
clrsetbits_le32(0x0232a808, 0x000000ff, 0x00000000);
clrsetbits_le32(0x0232a80c, 0xff000000, 0x02000000);
clrsetbits_le32(0x0232a810, 0xff000000, 0x1b000000);
clrsetbits_le32(0x0232a814, 0x0000ffff, 0x00006fb8);
clrsetbits_le32(0x0232a818, 0xffff00ff, 0x758000e4);
clrsetbits_le32(0x0232a8ac, 0x0000ff00, 0x00004400);
clrsetbits_le32(0x0232a82c, 0x00ffff00, 0x00200800);
clrsetbits_le32(0x0232a880, 0x00ff00ff, 0x00820082);
clrsetbits_le32(0x0232a884, 0xffffffff, 0x1d0f0385);
clrsetbits_le32(0x0232aa00, 0x0000ff00, 0x00000800);
clrsetbits_le32(0x0232aa08, 0xffff0000, 0x38a20000);
clrsetbits_le32(0x0232aa30, 0x00ffff00, 0x008a8a00);
clrsetbits_le32(0x0232aa84, 0x0000ff00, 0x00000600);
clrsetbits_le32(0x0232aa94, 0xff000000, 0x10000000);
clrsetbits_le32(0x0232aaa0, 0xff000000, 0x81000000);
clrsetbits_le32(0x0232aabc, 0xff000000, 0xff000000);
clrsetbits_le32(0x0232aac0, 0x000000ff, 0x0000008b);
clrsetbits_le32(0x0232ab08, 0xffff0000, 0x583f0000);
clrsetbits_le32(0x0232ab0c, 0x000000ff, 0x0000004e);
clrsetbits_le32(0x0232a000, 0x000000ff, 0x00000003);
clrsetbits_le32(0x0232aa00, 0x000000ff, 0x0000005f);
clrsetbits_le32(0x0232aa48, 0x00ffff00, 0x00fd8c00);
clrsetbits_le32(0x0232aa54, 0x00ffffff, 0x002fec72);
clrsetbits_le32(0x0232aa58, 0xffffff00, 0x00f92100);
clrsetbits_le32(0x0232aa5c, 0xffffffff, 0x00040060);
clrsetbits_le32(0x0232aa60, 0xffffffff, 0x00008000);
clrsetbits_le32(0x0232aa64, 0xffffffff, 0x0c581220);
clrsetbits_le32(0x0232aa68, 0xffffffff, 0xe13b0602);
clrsetbits_le32(0x0232aa6c, 0xffffffff, 0xb8074cc1);
clrsetbits_le32(0x0232aa70, 0xffffffff, 0x3f02e989);
clrsetbits_le32(0x0232aa74, 0x000000ff, 0x00000001);
clrsetbits_le32(0x0232ab20, 0x00ff0000, 0x00370000);
clrsetbits_le32(0x0232ab1c, 0xff000000, 0x37000000);
clrsetbits_le32(0x0232ab20, 0x000000ff, 0x0000005d);
/*Bring SerDes out of Reset if SerDes is Shutdown & is in Reset Mode*/
clrbits_le32(0x0232a010, 1 << 28);
/* Enable TX and RX via the LANExCTL_STS 0x0000 + x*4 */
clrbits_le32(0x0232a228, 1 << 29);
writel(0xF800F8C0, 0x0232bfe0);
clrbits_le32(0x0232a428, 1 << 29);
writel(0xF800F8C0, 0x0232bfe4);
clrbits_le32(0x0232a628, 1 << 29);
writel(0xF800F8C0, 0x0232bfe8);
clrbits_le32(0x0232a828, 1 << 29);
writel(0xF800F8C0, 0x0232bfec);
/*Enable pll via the pll_ctrl 0x0014*/
writel(0xe0000000, 0x0232bff4)
;
/*Waiting for SGMII Serdes PLL lock.*/
for (cnt = 10000; cnt > 0 && ((readl(0x02090114) & 0x10) == 0); cnt--)
;
for (cnt = 10000; cnt > 0 && ((readl(0x02090214) & 0x10) == 0); cnt--)
;
for (cnt = 10000; cnt > 0 && ((readl(0x02090414) & 0x10) == 0); cnt--)
;
for (cnt = 10000; cnt > 0 && ((readl(0x02090514) & 0x10) == 0); cnt--)
;
udelay(45000);
}
void sgmii_serdes_shutdown(void)
{
/*
* shutdown SerDes hardware. SerDes hardware vendor published only
* register addresses and their values. So had to use hardcoded
* values below.
*/
clrbits_le32(0x0232bfe0, 3 << 29 | 3 << 13);
setbits_le32(0x02320228, 1 << 29);
clrbits_le32(0x0232bfe4, 3 << 29 | 3 << 13);
setbits_le32(0x02320428, 1 << 29);
clrbits_le32(0x0232bfe8, 3 << 29 | 3 << 13);
setbits_le32(0x02320628, 1 << 29);
clrbits_le32(0x0232bfec, 3 << 29 | 3 << 13);
setbits_le32(0x02320828, 1 << 29);
clrbits_le32(0x02320034, 3 << 29);
setbits_le32(0x02320010, 1 << 28);
ks2_serdes_sgmii_156p25mhz_setup();
}
#
# Makefile for the U-boot SOC specific device drivers.
#
obj-$(CONFIG_ARCH_KEYSTONE) += keystone/
obj-$(CONFIG_TI_KEYSTONE_SERDES) += keystone_serdes.o
/*
* TI serdes driver for keystone2.
*
* (C) Copyright 2014
* Texas Instruments Incorporated, <www.ti.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
void ks2_serdes_sgmii_156p25mhz_setup(void)
{
unsigned int cnt;
/*
* configure Serializer/Deserializer (SerDes) hardware. SerDes IP
* hardware vendor published only register addresses and their values
* to be used for configuring SerDes. So had to use hardcoded values
* below.
*/
clrsetbits_le32(0x0232a000, 0xffff0000, 0x00800000);
clrsetbits_le32(0x0232a014, 0x0000ffff, 0x00008282);
clrsetbits_le32(0x0232a060, 0x00ffffff, 0x00142438);
clrsetbits_le32(0x0232a064, 0x00ffff00, 0x00c3c700);
clrsetbits_le32(0x0232a078, 0x0000ff00, 0x0000c000);
clrsetbits_le32(0x0232a204, 0xff0000ff, 0x38000080);
clrsetbits_le32(0x0232a208, 0x000000ff, 0x00000000);
clrsetbits_le32(0x0232a20c, 0xff000000, 0x02000000);
clrsetbits_le32(0x0232a210, 0xff000000, 0x1b000000);
clrsetbits_le32(0x0232a214, 0x0000ffff, 0x00006fb8);
clrsetbits_le32(0x0232a218, 0xffff00ff, 0x758000e4);
clrsetbits_le32(0x0232a2ac, 0x0000ff00, 0x00004400);
clrsetbits_le32(0x0232a22c, 0x00ffff00, 0x00200800);
clrsetbits_le32(0x0232a280, 0x00ff00ff, 0x00820082);
clrsetbits_le32(0x0232a284, 0xffffffff, 0x1d0f0385);
clrsetbits_le32(0x0232a404, 0xff0000ff, 0x38000080);
clrsetbits_le32(0x0232a408, 0x000000ff, 0x00000000);
clrsetbits_le32(0x0232a40c, 0xff000000, 0x02000000);
clrsetbits_le32(0x0232a410, 0xff000000, 0x1b000000);
clrsetbits_le32(0x0232a414, 0x0000ffff, 0x00006fb8);
clrsetbits_le32(0x0232a418, 0xffff00ff, 0x758000e4);
clrsetbits_le32(0x0232a4ac, 0x0000ff00, 0x00004400);
clrsetbits_le32(0x0232a42c, 0x00ffff00, 0x00200800);
clrsetbits_le32(0x0232a480, 0x00ff00ff, 0x00820082);
clrsetbits_le32(0x0232a484, 0xffffffff, 0x1d0f0385);
clrsetbits_le32(0x0232a604, 0xff0000ff, 0x38000080);
clrsetbits_le32(0x0232a608, 0x000000ff, 0x00000000);
clrsetbits_le32(0x0232a60c, 0xff000000, 0x02000000);
clrsetbits_le32(0x0232a610, 0xff000000, 0x1b000000);
clrsetbits_le32(0x0232a614, 0x0000ffff, 0x00006fb8);
clrsetbits_le32(0x0232a618, 0xffff00ff, 0x758000e4);
clrsetbits_le32(0x0232a6ac, 0x0000ff00, 0x00004400);
clrsetbits_le32(0x0232a62c, 0x00ffff00, 0x00200800);
clrsetbits_le32(0x0232a680, 0x00ff00ff, 0x00820082);
clrsetbits_le32(0x0232a684, 0xffffffff, 0x1d0f0385);
clrsetbits_le32(0x0232a804, 0xff0000ff, 0x38000080);
clrsetbits_le32(0x0232a808, 0x000000ff, 0x00000000);
clrsetbits_le32(0x0232a80c, 0xff000000, 0x02000000);
clrsetbits_le32(0x0232a810, 0xff000000, 0x1b000000);
clrsetbits_le32(0x0232a814, 0x0000ffff, 0x00006fb8);
clrsetbits_le32(0x0232a818, 0xffff00ff, 0x758000e4);
clrsetbits_le32(0x0232a8ac, 0x0000ff00, 0x00004400);
clrsetbits_le32(0x0232a82c, 0x00ffff00, 0x00200800);
clrsetbits_le32(0x0232a880, 0x00ff00ff, 0x00820082);
clrsetbits_le32(0x0232a884, 0xffffffff, 0x1d0f0385);
clrsetbits_le32(0x0232aa00, 0x0000ff00, 0x00000800);
clrsetbits_le32(0x0232aa08, 0xffff0000, 0x38a20000);
clrsetbits_le32(0x0232aa30, 0x00ffff00, 0x008a8a00);
clrsetbits_le32(0x0232aa84, 0x0000ff00, 0x00000600);
clrsetbits_le32(0x0232aa94, 0xff000000, 0x10000000);
clrsetbits_le32(0x0232aaa0, 0xff000000, 0x81000000);
clrsetbits_le32(0x0232aabc, 0xff000000, 0xff000000);
clrsetbits_le32(0x0232aac0, 0x000000ff, 0x0000008b);
clrsetbits_le32(0x0232ab08, 0xffff0000, 0x583f0000);
clrsetbits_le32(0x0232ab0c, 0x000000ff, 0x0000004e);
clrsetbits_le32(0x0232a000, 0x000000ff, 0x00000003);
clrsetbits_le32(0x0232aa00, 0x000000ff, 0x0000005f);
clrsetbits_le32(0x0232aa48, 0x00ffff00, 0x00fd8c00);
clrsetbits_le32(0x0232aa54, 0x00ffffff, 0x002fec72);
clrsetbits_le32(0x0232aa58, 0xffffff00, 0x00f92100);
clrsetbits_le32(0x0232aa5c, 0xffffffff, 0x00040060);
clrsetbits_le32(0x0232aa60, 0xffffffff, 0x00008000);
clrsetbits_le32(0x0232aa64, 0xffffffff, 0x0c581220);
clrsetbits_le32(0x0232aa68, 0xffffffff, 0xe13b0602);
clrsetbits_le32(0x0232aa6c, 0xffffffff, 0xb8074cc1);
clrsetbits_le32(0x0232aa70, 0xffffffff, 0x3f02e989);
clrsetbits_le32(0x0232aa74, 0x000000ff, 0x00000001);
clrsetbits_le32(0x0232ab20, 0x00ff0000, 0x00370000);
clrsetbits_le32(0x0232ab1c, 0xff000000, 0x37000000);
clrsetbits_le32(0x0232ab20, 0x000000ff, 0x0000005d);
/*Bring SerDes out of Reset if SerDes is Shutdown & is in Reset Mode*/
clrbits_le32(0x0232a010, 1 << 28);
/* Enable TX and RX via the LANExCTL_STS 0x0000 + x*4 */
clrbits_le32(0x0232a228, 1 << 29);
writel(0xF800F8C0, 0x0232bfe0);
clrbits_le32(0x0232a428, 1 << 29);
writel(0xF800F8C0, 0x0232bfe4);
clrbits_le32(0x0232a628, 1 << 29);
writel(0xF800F8C0, 0x0232bfe8);
clrbits_le32(0x0232a828, 1 << 29);
writel(0xF800F8C0, 0x0232bfec);
/*Enable pll via the pll_ctrl 0x0014*/
writel(0xe0000000, 0x0232bff4)
;
/*Waiting for SGMII Serdes PLL lock.*/
for (cnt = 10000; cnt > 0 && ((readl(0x02090114) & 0x10) == 0); cnt--)
;
for (cnt = 10000; cnt > 0 && ((readl(0x02090214) & 0x10) == 0); cnt--)
;
for (cnt = 10000; cnt > 0 && ((readl(0x02090414) & 0x10) == 0); cnt--)
;
for (cnt = 10000; cnt > 0 && ((readl(0x02090514) & 0x10) == 0); cnt--)
;
udelay(45000);
}
......@@ -41,4 +41,7 @@
#define CONFIG_KSNET_NETCP_V1_0
#define CONFIG_KSNET_CPSW_NUM_PORTS 5
/* SerDes */
#define CONFIG_TI_KEYSTONE_SERDES
#endif /* __CONFIG_K2HK_EVM_H */
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment