Commit a61a8196 authored by Reinhard Meyer's avatar Reinhard Meyer Committed by Ben Warren

NET: add ENC28J60 driver using SPI framework

V3: further refinements:
- use priv member instead of container method
- allow setting of MAC address by write_hwaddr method
- avoid shutting down link between commands
Signed-off-by: default avatarReinhard Meyer <u-boot@emk-elektronik.de>
Signed-off-by: default avatarBen Warren <biggerbadderben@gmail.com>
parent f29c181c
......@@ -39,6 +39,7 @@ COBJS-$(CONFIG_DRIVER_DM9000) += dm9000x.o
COBJS-$(CONFIG_DNET) += dnet.o
COBJS-$(CONFIG_E1000) += e1000.o
COBJS-$(CONFIG_EEPRO100) += eepro100.o
COBJS-$(CONFIG_ENC28J60) += enc28j60.o
COBJS-$(CONFIG_ENC28J60_LPC2292) += enc28j60_lpc2292.o
COBJS-$(CONFIG_EP93XX) += ep93xx_eth.o
COBJS-$(CONFIG_ETHOC) += ethoc.o
......
This diff is collapsed.
/*
* (X) extracted from enc28j60.c
* Reinhard Meyer, EMK Elektronik, reinhard.meyer@emk-elektronik.de
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#ifndef _enc28j60_h
#define _enc28j60_h
/*
* SPI Commands
*
* Bits 7-5: Command
* Bits 4-0: Register
*/
#define CMD_RCR(x) (0x00+((x)&0x1f)) /* Read Control Register */
#define CMD_RBM 0x3a /* Read Buffer Memory */
#define CMD_WCR(x) (0x40+((x)&0x1f)) /* Write Control Register */
#define CMD_WBM 0x7a /* Write Buffer Memory */
#define CMD_BFS(x) (0x80+((x)&0x1f)) /* Bit Field Set */
#define CMD_BFC(x) (0xa0+((x)&0x1f)) /* Bit Field Clear */
#define CMD_SRC 0xff /* System Reset Command */
/* NEW: encode (bank number+1) in upper byte */
/* Common Control Registers accessible in all Banks */
#define CTL_REG_EIE 0x01B
#define CTL_REG_EIR 0x01C
#define CTL_REG_ESTAT 0x01D
#define CTL_REG_ECON2 0x01E
#define CTL_REG_ECON1 0x01F
/* Control Registers accessible in Bank 0 */
#define CTL_REG_ERDPTL 0x100
#define CTL_REG_ERDPTH 0x101
#define CTL_REG_EWRPTL 0x102
#define CTL_REG_EWRPTH 0x103
#define CTL_REG_ETXSTL 0x104
#define CTL_REG_ETXSTH 0x105
#define CTL_REG_ETXNDL 0x106
#define CTL_REG_ETXNDH 0x107
#define CTL_REG_ERXSTL 0x108
#define CTL_REG_ERXSTH 0x109
#define CTL_REG_ERXNDL 0x10A
#define CTL_REG_ERXNDH 0x10B
#define CTL_REG_ERXRDPTL 0x10C
#define CTL_REG_ERXRDPTH 0x10D
#define CTL_REG_ERXWRPTL 0x10E
#define CTL_REG_ERXWRPTH 0x10F
#define CTL_REG_EDMASTL 0x110
#define CTL_REG_EDMASTH 0x111
#define CTL_REG_EDMANDL 0x112
#define CTL_REG_EDMANDH 0x113
#define CTL_REG_EDMADSTL 0x114
#define CTL_REG_EDMADSTH 0x115
#define CTL_REG_EDMACSL 0x116
#define CTL_REG_EDMACSH 0x117
/* Control Registers accessible in Bank 1 */
#define CTL_REG_EHT0 0x200
#define CTL_REG_EHT1 0x201
#define CTL_REG_EHT2 0x202
#define CTL_REG_EHT3 0x203
#define CTL_REG_EHT4 0x204
#define CTL_REG_EHT5 0x205
#define CTL_REG_EHT6 0x206
#define CTL_REG_EHT7 0x207
#define CTL_REG_EPMM0 0x208
#define CTL_REG_EPMM1 0x209
#define CTL_REG_EPMM2 0x20A
#define CTL_REG_EPMM3 0x20B
#define CTL_REG_EPMM4 0x20C
#define CTL_REG_EPMM5 0x20D
#define CTL_REG_EPMM6 0x20E
#define CTL_REG_EPMM7 0x20F
#define CTL_REG_EPMCSL 0x210
#define CTL_REG_EPMCSH 0x211
#define CTL_REG_EPMOL 0x214
#define CTL_REG_EPMOH 0x215
#define CTL_REG_EWOLIE 0x216
#define CTL_REG_EWOLIR 0x217
#define CTL_REG_ERXFCON 0x218
#define CTL_REG_EPKTCNT 0x219
/* Control Registers accessible in Bank 2 */
#define CTL_REG_MACON1 0x300
#define CTL_REG_MACON2 0x301
#define CTL_REG_MACON3 0x302
#define CTL_REG_MACON4 0x303
#define CTL_REG_MABBIPG 0x304
#define CTL_REG_MAIPGL 0x306
#define CTL_REG_MAIPGH 0x307
#define CTL_REG_MACLCON1 0x308
#define CTL_REG_MACLCON2 0x309
#define CTL_REG_MAMXFLL 0x30A
#define CTL_REG_MAMXFLH 0x30B
#define CTL_REG_MAPHSUP 0x30D
#define CTL_REG_MICON 0x311
#define CTL_REG_MICMD 0x312
#define CTL_REG_MIREGADR 0x314
#define CTL_REG_MIWRL 0x316
#define CTL_REG_MIWRH 0x317
#define CTL_REG_MIRDL 0x318
#define CTL_REG_MIRDH 0x319
/* Control Registers accessible in Bank 3 */
#define CTL_REG_MAADR1 0x400
#define CTL_REG_MAADR0 0x401
#define CTL_REG_MAADR3 0x402
#define CTL_REG_MAADR2 0x403
#define CTL_REG_MAADR5 0x404
#define CTL_REG_MAADR4 0x405
#define CTL_REG_EBSTSD 0x406
#define CTL_REG_EBSTCON 0x407
#define CTL_REG_EBSTCSL 0x408
#define CTL_REG_EBSTCSH 0x409
#define CTL_REG_MISTAT 0x40A
#define CTL_REG_EREVID 0x412
#define CTL_REG_ECOCON 0x415
#define CTL_REG_EFLOCON 0x417
#define CTL_REG_EPAUSL 0x418
#define CTL_REG_EPAUSH 0x419
/* PHY Register */
#define PHY_REG_PHCON1 0x00
#define PHY_REG_PHSTAT1 0x01
#define PHY_REG_PHID1 0x02
#define PHY_REG_PHID2 0x03
#define PHY_REG_PHCON2 0x10
#define PHY_REG_PHSTAT2 0x11
#define PHY_REG_PHLCON 0x14
/* Receive Filter Register (ERXFCON) bits */
#define ENC_RFR_UCEN 0x80
#define ENC_RFR_ANDOR 0x40
#define ENC_RFR_CRCEN 0x20
#define ENC_RFR_PMEN 0x10
#define ENC_RFR_MPEN 0x08
#define ENC_RFR_HTEN 0x04
#define ENC_RFR_MCEN 0x02
#define ENC_RFR_BCEN 0x01
/* ECON1 Register Bits */
#define ENC_ECON1_TXRST 0x80
#define ENC_ECON1_RXRST 0x40
#define ENC_ECON1_DMAST 0x20
#define ENC_ECON1_CSUMEN 0x10
#define ENC_ECON1_TXRTS 0x08
#define ENC_ECON1_RXEN 0x04
#define ENC_ECON1_BSEL1 0x02
#define ENC_ECON1_BSEL0 0x01
/* ECON2 Register Bits */
#define ENC_ECON2_AUTOINC 0x80
#define ENC_ECON2_PKTDEC 0x40
#define ENC_ECON2_PWRSV 0x20
#define ENC_ECON2_VRPS 0x08
/* EIR Register Bits */
#define ENC_EIR_PKTIF 0x40
#define ENC_EIR_DMAIF 0x20
#define ENC_EIR_LINKIF 0x10
#define ENC_EIR_TXIF 0x08
#define ENC_EIR_WOLIF 0x04
#define ENC_EIR_TXERIF 0x02
#define ENC_EIR_RXERIF 0x01
/* ESTAT Register Bits */
#define ENC_ESTAT_INT 0x80
#define ENC_ESTAT_LATECOL 0x10
#define ENC_ESTAT_RXBUSY 0x04
#define ENC_ESTAT_TXABRT 0x02
#define ENC_ESTAT_CLKRDY 0x01
/* EIE Register Bits */
#define ENC_EIE_INTIE 0x80
#define ENC_EIE_PKTIE 0x40
#define ENC_EIE_DMAIE 0x20
#define ENC_EIE_LINKIE 0x10
#define ENC_EIE_TXIE 0x08
#define ENC_EIE_WOLIE 0x04
#define ENC_EIE_TXERIE 0x02
#define ENC_EIE_RXERIE 0x01
/* MACON1 Register Bits */
#define ENC_MACON1_LOOPBK 0x10
#define ENC_MACON1_TXPAUS 0x08
#define ENC_MACON1_RXPAUS 0x04
#define ENC_MACON1_PASSALL 0x02
#define ENC_MACON1_MARXEN 0x01
/* MACON2 Register Bits */
#define ENC_MACON2_MARST 0x80
#define ENC_MACON2_RNDRST 0x40
#define ENC_MACON2_MARXRST 0x08
#define ENC_MACON2_RFUNRST 0x04
#define ENC_MACON2_MATXRST 0x02
#define ENC_MACON2_TFUNRST 0x01
/* MACON3 Register Bits */
#define ENC_MACON3_PADCFG2 0x80
#define ENC_MACON3_PADCFG1 0x40
#define ENC_MACON3_PADCFG0 0x20
#define ENC_MACON3_TXCRCEN 0x10
#define ENC_MACON3_PHDRLEN 0x08
#define ENC_MACON3_HFRMEN 0x04
#define ENC_MACON3_FRMLNEN 0x02
#define ENC_MACON3_FULDPX 0x01
/* MACON4 Register Bits */
#define ENC_MACON4_DEFER 0x40
/* MICMD Register Bits */
#define ENC_MICMD_MIISCAN 0x02
#define ENC_MICMD_MIIRD 0x01
/* MISTAT Register Bits */
#define ENC_MISTAT_NVALID 0x04
#define ENC_MISTAT_SCAN 0x02
#define ENC_MISTAT_BUSY 0x01
/* PHID1 and PHID2 values */
#define ENC_PHID1_VALUE 0x0083
#define ENC_PHID2_VALUE 0x1400
#define ENC_PHID2_MASK 0xFC00
/* PHCON1 values */
#define ENC_PHCON1_PDPXMD 0x0100
/* PHSTAT1 values */
#define ENC_PHSTAT1_LLSTAT 0x0004
/* PHSTAT2 values */
#define ENC_PHSTAT2_LSTAT 0x0400
#define ENC_PHSTAT2_DPXSTAT 0x0200
#endif
......@@ -54,6 +54,8 @@ int designware_initialize(u32 id, ulong base_addr, u32 phy_addr);
int dnet_eth_initialize(int id, void *regs, unsigned int phy_addr);
int e1000_initialize(bd_t *bis);
int eepro100_initialize(bd_t *bis);
int enc28j60_initialize(unsigned int bus, unsigned int cs,
unsigned int max_hz, unsigned int mode);
int ep93xx_eth_initialize(u8 dev_num, int base_addr);
int ethoc_initialize(u8 dev_num, int base_addr);
int eth_3com_initialize (bd_t * bis);
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment