Commit a69a4233 authored by Mark Jackson's avatar Mark Jackson Committed by Haavard Skinnemoen

MIMC200 board now uses CONFIG_DISABLE_CONSOLE

Changed MIMC200 board setup and config to use CONFIG_DISABLE_CONSOLE.
Also fixed default uImage location.
Signed-off-by: default avatarMark Jackson <mpfj@mimc.co.uk>
Signed-off-by: default avatarHaavard Skinnemoen <haavard.skinnemoen@atmel.com>
parent 8fd4166c
......@@ -82,7 +82,7 @@ int board_early_init_f(void)
/* are we suppressing the console ? */
if (gpio_get_value(GPIO_PIN_PE21) == 1)
gd->flags |= GD_FLG_SILENT;
gd->flags |= (GD_FLG_SILENT | GD_FLG_DISABLE_CONSOLE);
/* reset phys */
gpio_select_pio(GPIO_PIN_PE24, 0);
......
......@@ -74,12 +74,12 @@
#define CONFIG_BAUDRATE 115200
#define CONFIG_BOOTARGS \
"console=ttyS0 root=/dev/mtdblock1 fbmem=600k rootfstype=jffs2"
"root=/dev/mtdblock1 rootfstype=jffs2 console=ttyS1"
#define CONFIG_BOOTCOMMAND \
"fsload; bootm"
"fsload boot/uImage; bootm"
#define CONFIG_SILENT_CONSOLE 1 /* enable silent startup */
#define CONFIG_SILENT_CONSOLE_INPUT 1 /* disable console inputs */
#define CONFIG_DISABLE_CONSOLE 1 /* disable console */
#define CFG_DEVICE_NULLDEV 1 /* include nulldev device */
/*
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment