Commit a7d660bc authored by Simon Glass's avatar Simon Glass

tpm: Add Kconfig options for TPMs

Add new Kconfig options for TPMs in preparation for moving boards to use
Kconfig for TPM configuration.
Signed-off-by: default avatarSimon Glass <sjg@chromium.org>
Acked-by: Christophe Ricard<christophe-h.ricard@st.com>
Reviewed-by: default avatarHeiko Schocher <hs@denx.de>
parent afc84dec
......@@ -625,4 +625,16 @@ config CMD_REGULATOR
endmenu
menu "Security commands"
config CMD_TPM
bool "Enable the 'tpm' command"
depends on TPM
help
This provides a means to talk to a TPM from the command line. A wide
range of commands if provided - see 'tpm help' for details. The
command requires a suitable TPM on your board and the correct driver
must be enabled.
endmenu
endmenu
#
# TPM subsystem configuration
#
menu "TPM support"
config TPM_TIS_SANDBOX
bool "Enable sandbox TPM driver"
depends on SANDBOX
help
This driver emulates a TPM, providing access to base functions
such as reading and writing TPM private data. This is enough to
support Chrome OS verified boot. Extend functionality is not
implemented.
config TPM_ATMEL_TWI
bool "Enable Atmel TWI TPM device driver"
depends on TPM
help
This driver supports an Atmel TPM device connected on the I2C bus.
The usual tpm operations and the 'tpm' command can be used to talk
to the device using the standard TPM Interface Specification (TIS)
protocol
config TPM_TIS_I2C
bool "Enable support for Infineon SLB9635/45 TPMs on I2C"
depends on TPM && DM_I2C
help
This driver supports Infineon TPM devices connected on the I2C bus.
The usual tpm operations and the 'tpm' command can be used to talk
to the device using the standard TPM Interface Specification (TIS)
protocol
config TPM_TIS_I2C_BURST_LIMITATION
bool "Enable I2C burst length limitation"
depends on TPM_TIS_I2C
help
Some broken TPMs have a limitation on the number of bytes they can
receive in one message. Enable this option to allow you to set this
option. The can allow a broken TPM to be used by splitting messages
into separate pieces.
config TPM_TIS_I2C_BURST_LIMITATION_LEN
int "Length"
depends on TPM_TIS_I2C_BURST_LIMITATION
help
Use this to set the burst limitation length
config TPM_TIS_LPC
bool "Enable support for Infineon SLB9635/45 TPMs on LPC"
depends on TPM && X86
help
This driver supports Infineon TPM devices connected on the I2C bus.
The usual tpm operations and the 'tpm' command can be used to talk
to the device using the standard TPM Interface Specification (TIS)
protocol
config TPM_AUTH_SESSIONS
bool "Enable TPM authentication session support"
depends on TPM
help
Enable support for authorised (AUTH1) commands as specified in the
TCG Main Specification 1.2. OIAP-authorised versions of the commands
TPM_LoadKey2 and TPM_GetPubKey are provided. Both features are
available using the 'tpm' command, too.
endmenu
......@@ -54,6 +54,16 @@ source lib/dhry/Kconfig
source lib/rsa/Kconfig
config TPM
bool "Trusted Platform Module (TPM) Support"
help
This enables support for TPMs which can be used to provide security
features for your board. The TPM can be connected via LPC or I2C
and a sandbox TPM is provided for testing purposes. Use the 'tpm'
command to interactive the TPM. Driver model support is provided
for the low-level TPM interface, but only one TPM is supported at
a time by the TPM library.
menu "Hashing Support"
config SHA1
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment