Commit a994b3de authored by Shengzhou Liu's avatar Shengzhou Liu Committed by York Sun

driver/ddr/fsl: Add workaround for A009663

Erratum A-009663 workaround requires to set DDR_INTERVAL[BSTOPRE] to 0
before setting DDR_SDRAM_CFG[MEM_EN] and set DDR_INTERVAL[BSTOPRE]
to the desired value after DDR initialization has completed.

When DDR controller is configured to operate in auto-precharge
mode(DDR_INTERVAL[BSTOPRE]=0), this workaround is not needed.
Signed-off-by: default avatarShengzhou Liu <Shengzhou.Liu@freescale.com>
Reviewed-by: default avatarYork Sun <york.sun@nxp.com>
parent 6f14e257
......@@ -118,7 +118,9 @@
#define CONFIG_SYS_FSL_ERRATUM_A008585
#define CONFIG_SYS_FSL_ERRATUM_A008751
#define CONFIG_SYS_FSL_ERRATUM_A009635
#define CONFIG_SYS_FSL_ERRATUM_A009663
#define CONFIG_SYS_FSL_ERRATUM_A009942
#elif defined(CONFIG_LS1043A)
#define CONFIG_MAX_CPUS 4
#define CONFIG_SYS_CACHELINE_SIZE 64
......@@ -167,6 +169,7 @@
#define GICD_BASE 0x01401000
#define GICC_BASE 0x01402000
#define CONFIG_SYS_FSL_ERRATUM_A009663
#define CONFIG_SYS_FSL_ERRATUM_A009929
#else
#error SoC not defined
......
......@@ -131,6 +131,7 @@
#define CONFIG_SYS_FSL_SEC_COMPAT 5
#define CONFIG_USB_MAX_CONTROLLER_COUNT 1
#define CONFIG_SYS_FSL_ERRATUM_A008378
#define CONFIG_SYS_FSL_ERRATUM_A009663
#else
#error SoC not defined
#endif
......
......@@ -326,6 +326,9 @@ static int do_errata(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
#if defined(CONFIG_SYS_FSL_B4860QDS_XFI_ERR) && defined(CONFIG_B4860QDS)
puts("Work-around for Erratum XFI on B4860QDS enabled\n");
#endif
#ifdef CONFIG_SYS_FSL_ERRATUM_A009663
puts("Work-around for Erratum A009663 enabled\n");
#endif
return 0;
}
......
......@@ -808,6 +808,7 @@ defined(CONFIG_PPC_T1020) || defined(CONFIG_PPC_T1022)
#define QE_NUM_OF_SNUM 28
#define CONFIG_SYS_FSL_SFP_VER_3_0
#define CONFIG_SYS_FSL_ERRATUM_A008378
#define CONFIG_SYS_FSL_ERRATUM_A009663
#elif defined(CONFIG_PPC_T1024) || defined(CONFIG_PPC_T1023) ||\
defined(CONFIG_PPC_T1014) || defined(CONFIG_PPC_T1013)
......@@ -856,6 +857,7 @@ defined(CONFIG_PPC_T1014) || defined(CONFIG_PPC_T1013)
#define QE_NUM_OF_SNUM 28
#define CONFIG_SYS_FSL_SFP_VER_3_0
#define CONFIG_SYS_FSL_ERRATUM_A008378
#define CONFIG_SYS_FSL_ERRATUM_A009663
#elif defined(CONFIG_PPC_T2080) || defined(CONFIG_PPC_T2081)
#define CONFIG_E6500
......
......@@ -155,7 +155,12 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
ddr_out32(&ddr->sdram_mode_15, regs->ddr_sdram_mode_15);
ddr_out32(&ddr->sdram_mode_16, regs->ddr_sdram_mode_16);
ddr_out32(&ddr->sdram_md_cntl, regs->ddr_sdram_md_cntl);
#ifdef CONFIG_SYS_FSL_ERRATUM_A009663
ddr_out32(&ddr->sdram_interval,
regs->ddr_sdram_interval & ~SDRAM_INTERVAL_BSTOPRE);
#else
ddr_out32(&ddr->sdram_interval, regs->ddr_sdram_interval);
#endif
ddr_out32(&ddr->sdram_data_init, regs->ddr_data_init);
ddr_out32(&ddr->ddr_wrlvl_cntl, regs->ddr_wrlvl_cntl);
#ifndef CONFIG_SYS_FSL_DDR_EMU
......@@ -397,6 +402,11 @@ step2:
if (timeout <= 0)
printf("Waiting for D_INIT timeout. Memory may not work.\n");
#ifdef CONFIG_SYS_FSL_ERRATUM_A009663
ddr_out32(&ddr->sdram_interval, regs->ddr_sdram_interval);
#endif
#ifdef CONFIG_DEEP_SLEEP
if (is_warm_boot()) {
/* exit self-refresh */
......
......@@ -129,6 +129,7 @@ typedef struct ddr4_spd_eeprom_s generic_spd_eeprom_t;
#define SDRAM_CFG2_ODT_ONLY_READ 2
#define SDRAM_CFG2_ODT_ALWAYS 3
#define SDRAM_INTERVAL_BSTOPRE 0x3FFF
#define TIMING_CFG_2_CPO_MASK 0x0F800000
#if defined(CONFIG_SYS_FSL_DDR_VER) && \
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment