Commit acf3f8da authored by Kumar Gala's avatar Kumar Gala

powerpc/85xx: Handle the lack of L2 cache on P2040/P2040E

The P2040/P2040E have no L2 cache.  So we utilize the SVR to determine
if we are one of these devices and skip the L2 init code in cpu_init.c
and release.  For the device tree we skip the updating of the L2 cache
properties but we still update the chain of caches so the CPC/L3 node
can be properly updated.
Signed-off-by: default avatarKumar Gala <galak@kernel.crashing.org>
parent db564bcc
......@@ -392,6 +392,12 @@ int cpu_init_r(void)
puts("enabled\n");
}
#elif defined(CONFIG_BACKSIDE_L2_CACHE)
if ((SVR_SOC_VER(get_svr()) == SVR_P2040) ||
(SVR_SOC_VER(get_svr()) == SVR_P2040_E)) {
puts("N/A\n");
goto skip_l2;
}
u32 l2cfg0 = mfspr(SPRN_L2CFG0);
/* invalidate the L2 cache */
......@@ -412,6 +418,8 @@ int cpu_init_r(void)
;
printf("%d KB enabled\n", (l2cfg0 & 0x3fff) * 64);
}
skip_l2:
#else
puts("disabled\n");
#endif
......
......@@ -228,6 +228,12 @@ static inline void ft_fixup_l2cache(void *blob)
u32 *ph;
u32 l2cfg0 = mfspr(SPRN_L2CFG0);
u32 size, line_size, num_ways, num_sets;
int has_l2 = 1;
/* P2040/P2040E has no L2, so dont set any L2 props */
if ((SVR_SOC_VER(get_svr()) == SVR_P2040) ||
(SVR_SOC_VER(get_svr()) == SVR_P2040_E))
has_l2 = 0;
size = (l2cfg0 & 0x3fff) * 64 * 1024;
num_ways = ((l2cfg0 >> 14) & 0x1f) + 1;
......@@ -250,21 +256,22 @@ static inline void ft_fixup_l2cache(void *blob)
goto next;
}
if (has_l2) {
#ifdef CONFIG_SYS_CACHE_STASHING
{
u32 *reg = (u32 *)fdt_getprop(blob, off, "reg", 0);
if (reg)
fdt_setprop_cell(blob, l2_off, "cache-stash-id",
(*reg * 2) + 32 + 1);
}
#endif
fdt_setprop(blob, l2_off, "cache-unified", NULL, 0);
fdt_setprop_cell(blob, l2_off, "cache-block-size", line_size);
fdt_setprop_cell(blob, l2_off, "cache-size", size);
fdt_setprop_cell(blob, l2_off, "cache-sets", num_sets);
fdt_setprop_cell(blob, l2_off, "cache-level", 2);
fdt_setprop(blob, l2_off, "compatible", "cache", 6);
fdt_setprop(blob, l2_off, "cache-unified", NULL, 0);
fdt_setprop_cell(blob, l2_off, "cache-block-size",
line_size);
fdt_setprop_cell(blob, l2_off, "cache-size", size);
fdt_setprop_cell(blob, l2_off, "cache-sets", num_sets);
fdt_setprop_cell(blob, l2_off, "cache-level", 2);
fdt_setprop(blob, l2_off, "compatible", "cache", 6);
}
if (l3_off < 0) {
ph = (u32 *)fdt_getprop(blob, l2_off, "next-level-cache", 0);
......
/*
* Copyright 2008-2010 Freescale Semiconductor, Inc.
* Copyright 2008-2011 Freescale Semiconductor, Inc.
* Kumar Gala <kumar.gala@freescale.com>
*
* See file CREDITS for list of people who contributed to this
......@@ -144,6 +144,18 @@ __secondary_start_page:
#endif
#ifdef CONFIG_BACKSIDE_L2_CACHE
/* skip L2 setup on P2040/P2040E as they have no L2 */
mfspr r2,SPRN_SVR
lis r3,SVR_P2040@h
ori r3,r3,SVR_P2040@l
cmpw r2,r3
beq 3f
lis r3,SVR_P2040_E@h
ori r3,r3,SVR_P2040_E@l
cmpw r2,r3
beq 3f
/* Enable/invalidate the L2 cache */
msync
lis r2,(L2CSR0_L2FI|L2CSR0_L2LFC)@h
......@@ -169,6 +181,7 @@ __secondary_start_page:
andis. r1,r3,L2CSR0_L2E@h
beq 2b
#endif
3:
#define EPAPR_MAGIC (0x45504150)
#define ENTRY_ADDR_UPPER 0
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment