Commit aff092ed authored by Peter Tyser's avatar Peter Tyser Committed by Scott Wood

nand: Remove unused CONFIG_MTD_NAND_ECC_JFFS2 option

This option was removed along with legacy NAND support in
be33b046.  Clean up some remnants.
Signed-off-by: default avatarPeter Tyser <ptyser@xes-inc.com>
parent 88a2cbb2
......@@ -99,12 +99,6 @@ Configuration Options:
CONFIG_CMD_NAND_TORTURE
Enables the torture command (see description of this command below).
CONFIG_MTD_NAND_ECC_JFFS2
Define this if you want the Error Correction Code information in
the out-of-band data to be formatted to match the JFFS2 file system.
CONFIG_MTD_NAND_ECC_YAFFS would be another useful choice for
someone to implement.
CONFIG_SYS_MAX_NAND_DEVICE
The maximum number of NAND devices you want to support.
......@@ -312,12 +306,6 @@ Platform specific options
NOTE:
=====
The current NAND implementation is based on what is in recent
Linux kernels. The old legacy implementation has been removed.
If you have board code which used CONFIG_NAND_LEGACY, you'll need
to convert to the current NAND interface for it to continue to work.
The Disk On Chip driver is currently broken and has been for some time.
There is a driver in drivers/mtd/nand, taken from Linux, that works with
the current NAND system but has not yet been adapted to the u-boot
......
......@@ -153,7 +153,6 @@
/* JFFS2 */
#ifdef CONFIG_CMD_JFFS2
#define CONFIG_MTD_NAND_ECC_JFFS2
#define CONFIG_JFFS2_CMDLINE
#define CONFIG_JFFS2_NAND
#endif
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment