Commit b41f192b authored by York Sun's avatar York Sun

powerpc: B4420: Remove macro CONFIG_PPC_B4420

Replace CONFIG_PPC_B4420 with ARCH_B4420 in Kconfig and clean up
existing macros.
parent d46a4a13
......@@ -18,6 +18,7 @@ config TARGET_SOCRATES
config TARGET_B4420QDS
bool "Support B4420QDS"
select ARCH_B4420
select SUPPORT_SPL
select PHYS_64BIT
......@@ -257,6 +258,9 @@ config TARGET_CYRUS
endchoice
config ARCH_B4420
bool
config ARCH_B4860
bool
......
......@@ -47,7 +47,7 @@ obj-$(CONFIG_ARCH_P5040) += p5040_ids.o
obj-$(CONFIG_PPC_T4240) += t4240_ids.o
obj-$(CONFIG_PPC_T4160) += t4240_ids.o
obj-$(CONFIG_PPC_T4080) += t4240_ids.o
obj-$(CONFIG_PPC_B4420) += b4860_ids.o
obj-$(CONFIG_ARCH_B4420) += b4860_ids.o
obj-$(CONFIG_ARCH_B4860) += b4860_ids.o
obj-$(CONFIG_PPC_T1040) += t1040_ids.o
obj-$(CONFIG_PPC_T1042) += t1040_ids.o
......@@ -89,7 +89,7 @@ obj-$(CONFIG_ARCH_P5040) += p5040_serdes.o
obj-$(CONFIG_PPC_T4240) += t4240_serdes.o
obj-$(CONFIG_PPC_T4160) += t4240_serdes.o
obj-$(CONFIG_PPC_T4080) += t4240_serdes.o
obj-$(CONFIG_PPC_B4420) += b4860_serdes.o
obj-$(CONFIG_ARCH_B4420) += b4860_serdes.o
obj-$(CONFIG_ARCH_B4860) += b4860_serdes.o
obj-$(CONFIG_ARCH_BSC9132) += bsc9132_serdes.o
obj-$(CONFIG_PPC_T1040) += t1040_serdes.o
......
......@@ -62,7 +62,7 @@ struct liodn_id_table liodn_tbl[] = {
SET_DMA_LIODN(1, "fsl,elo3-dma", 147),
SET_DMA_LIODN(2, "fsl,elo3-dma", 227),
#ifndef CONFIG_PPC_B4420
#ifndef CONFIG_ARCH_B4420
SET_GUTS_LIODN("fsl,rapidio-delta", 199, rio1liodnr, 0),
SET_GUTS_LIODN(NULL, 200, rio2liodnr, 0),
SET_GUTS_LIODN(NULL, 201, rio1maintliodnr, 0),
......@@ -81,7 +81,7 @@ struct fman_liodn_id_table fman1_liodn_tbl[] = {
SET_FMAN_RX_1G_LIODN(1, 3, 91),
SET_FMAN_RX_1G_LIODN(1, 4, 92),
SET_FMAN_RX_1G_LIODN(1, 5, 93),
#ifndef CONFIG_PPC_B4420
#ifndef CONFIG_ARCH_B4420
SET_FMAN_RX_10G_LIODN(1, 0, 94),
SET_FMAN_RX_10G_LIODN(1, 1, 95),
#endif
......
......@@ -180,7 +180,7 @@ static struct serdes_config serdes2_cfg_tbl[] = {
};
#endif
#ifdef CONFIG_PPC_B4420
#ifdef CONFIG_ARCH_B4420
static struct serdes_config serdes1_cfg_tbl[] = {
{0x0D, {NONE, NONE, CPRI6, CPRI5,
CPRI4, CPRI3, NONE, NONE} },
......
......@@ -202,7 +202,7 @@ void get_sys_info(sys_info_t *sys_info)
}
#endif
#if defined(CONFIG_ARCH_B4860) || defined(CONFIG_PPC_B4420) || \
#if defined(CONFIG_ARCH_B4860) || defined(CONFIG_ARCH_B4420) || \
defined(CONFIG_PPC_T2080) || defined(CONFIG_PPC_T2081)
#define FM1_CLK_SEL 0xe0000000
#define FM1_CLK_SHIFT 29
......
......@@ -611,7 +611,7 @@
#define CONFIG_SYS_FSL_SFP_VER_3_0
#define CONFIG_SYS_FSL_PCI_VER_3_X
#elif defined(CONFIG_ARCH_B4860) || defined(CONFIG_PPC_B4420)
#elif defined(CONFIG_ARCH_B4860) || defined(CONFIG_ARCH_B4420)
#define CONFIG_E6500
#define CONFIG_SYS_PPC64 /* 64-bit core */
#define CONFIG_FSL_CORENET /* Freescale CoreNet platform */
......
......@@ -1770,7 +1770,7 @@ typedef struct ccsr_gur {
#define FSL_CORENET2_RCWSR4_SRDS4_PRTCL 0x000000f8
#define FSL_CORENET2_RCWSR4_SRDS4_PRTCL_SHIFT 3
#define FSL_CORENET_RCWSR6_BOOT_LOC 0x0f800000
#elif defined(CONFIG_ARCH_B4860) || defined(CONFIG_PPC_B4420)
#elif defined(CONFIG_ARCH_B4860) || defined(CONFIG_ARCH_B4420)
#define FSL_CORENET2_RCWSR4_SRDS1_PRTCL 0xfe000000
#define FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT 25
#define FSL_CORENET2_RCWSR4_SRDS2_PRTCL 0x00ff0000
......@@ -2883,8 +2883,8 @@ struct ccsr_pman {
#define CONFIG_SYS_MPC85xx_TDM_OFFSET 0x185000
#define CONFIG_SYS_MPC85xx_QE_OFFSET 0x140000
#define CONFIG_SYS_FSL_CORENET_RMAN_OFFSET 0x1e0000
#if defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2) && !defined(CONFIG_ARCH_B4860)\
&& !defined(CONFIG_PPC_B4420)
#if defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2) && !defined(CONFIG_ARCH_B4860) && \
!defined(CONFIG_ARCH_B4420)
#define CONFIG_SYS_MPC85xx_PCIE1_OFFSET 0x240000
#define CONFIG_SYS_MPC85xx_PCIE2_OFFSET 0x250000
#define CONFIG_SYS_MPC85xx_PCIE3_OFFSET 0x260000
......
......@@ -437,7 +437,7 @@ int configure_vsc3316_3308(void)
}
break;
#ifdef CONFIG_PPC_B4420
#ifdef CONFIG_ARCH_B4420
case 0x17:
case 0x18:
/*
......@@ -496,7 +496,7 @@ int configure_vsc3316_3308(void)
/* Configure VSC3308 crossbar switch */
ret = select_i2c_ch_pca(I2C_CH_VSC3308);
switch (serdes2_prtcl) {
#ifdef CONFIG_PPC_B4420
#ifdef CONFIG_ARCH_B4420
case 0x9d:
#endif
case 0x9E:
......@@ -929,7 +929,7 @@ int config_serdes2_refclks(void)
* For this SerDes2's Refclk1 need to be set to 100MHz
*/
switch (serdes2_prtcl) {
#ifdef CONFIG_PPC_B4420
#ifdef CONFIG_ARCH_B4420
case 0x9d:
#endif
case 0x9E:
......
......@@ -28,7 +28,7 @@ static int8_t vsc16_tx_sfp_sgmii_aurora[8][2] = { {15, 7}, {0, 1},
{7, 8}, {9, 0}, {5, 14},
{4, 15}, {2, 12}, {12, 13} };
#ifdef CONFIG_PPC_B4420
#ifdef CONFIG_ARCH_B4420
static int8_t vsc16_tx_sgmii_lane_cd[8][2] = { {5, 14}, {4, 15},
{-1, -1}, {-1, -1}, {-1, -1}, {-1, -1}, {-1, -1}, {-1, -1} };
#endif
......@@ -54,7 +54,7 @@ static int8_t vsc16_rx_sfp_sgmii_aurora[8][2] = { {8, 15}, {0, 1},
{7, 8}, {1, 9}, {14, 11},
{15, 10}, {13, 3}, {12, 12} };
#ifdef CONFIG_PPC_B4420
#ifdef CONFIG_ARCH_B4420
static int8_t vsc16_rx_sgmii_lane_cd[8][2] = { {14, 11}, {15, 10},
{-1, -1}, {-1, -1}, {-1, -1}, {-1, -1}, {-1, -1}, {-1, -1} };
#endif
......
......@@ -213,7 +213,7 @@ int board_eth_init(bd_t *bis)
fm_info_set_phy_address(FM1_DTSEC6,
CONFIG_SYS_FM1_ONBOARD_PHY2_ADDR);
break;
#ifdef CONFIG_PPC_B4420
#ifdef CONFIG_ARCH_B4420
case 0x17:
case 0x18:
/* Serdes 1: A-D SGMII, Configuring on board dual SGMII Phy */
......
......@@ -12,7 +12,7 @@ CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_SYS_EXTRA_OPTIONS="PPC_B4420,RAMBOOT_PBL,SPL_FSL_PBL,NAND"
CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL,NAND"
CONFIG_BOOTDELAY=10
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
CONFIG_SPL=y
......
......@@ -5,7 +5,7 @@ CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_SYS_EXTRA_OPTIONS="PPC_B4420,RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF40000"
CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF40000"
CONFIG_BOOTDELAY=10
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
CONFIG_HUSH_PARSER=y
......
......@@ -5,7 +5,6 @@ CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_SYS_EXTRA_OPTIONS="PPC_B4420"
CONFIG_BOOTDELAY=10
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
CONFIG_HUSH_PARSER=y
......
......@@ -35,7 +35,7 @@ obj-$(CONFIG_PPC_T2081) += t2080.o
obj-$(CONFIG_PPC_T4240) += t4240.o
obj-$(CONFIG_PPC_T4160) += t4240.o
obj-$(CONFIG_PPC_T4080) += t4240.o
obj-$(CONFIG_PPC_B4420) += b4860.o
obj-$(CONFIG_ARCH_B4420) += b4860.o
obj-$(CONFIG_ARCH_B4860) += b4860.o
obj-$(CONFIG_LS1043A) += ls1043.o
obj-$(CONFIG_ARCH_LS1046A) += ls1046.o
......@@ -73,7 +73,7 @@
#define CONFIG_FSL_PCI_INIT /* Use common FSL init code */
#define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */
#ifndef CONFIG_PPC_B4420
#ifndef CONFIG_ARCH_B4420
#define CONFIG_SYS_SRIO
#define CONFIG_SRIO1 /* SRIO port 1 */
#define CONFIG_SRIO2 /* SRIO port 2 */
......
......@@ -3638,7 +3638,6 @@ CONFIG_PPC4xx_DDR_AUTOCALIBRATION
CONFIG_PPC4xx_DDR_METHOD_A
CONFIG_PPC4xx_EMAC
CONFIG_PPC64BRIDGE
CONFIG_PPC_B4420
CONFIG_PPC_CLUSTER_START
CONFIG_PPC_SPINTABLE_COMPATIBLE
CONFIG_PPC_T1023
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment