Commit b953a618 authored by Chen-Yu Tsai's avatar Chen-Yu Tsai Committed by Hans de Goede

sunxi: Add defconfig for Sinlinx SinA31s

The Sinlinx A31s SDK is a A31s based module/baseboard development kit.

The core module has the SoC, PMIC, DRAM, eMMC and supporting components.
There are also pads for UART0, JTAG and I2S.

The baseboard has 100 Mbps Ethernet, 5x USB 2.0 host ports via a USB 2.0
hub chip, MMC, HDMI, SPDIF, CIR, audio jacks, 2 tablet-like volume
buttons, RS232 style UART and USB OTG (though VBUS is not connected).
Various headers are available for other addon modules, such as SDIO
WiFi, LCD display, camera sensor, UARTs, I2C, SPI and GPIOs.
Signed-off-by: default avatarChen-Yu Tsai <wens@csie.org>
Acked-by: default avatarHans de Goede <hdegoede@redhat.com>
Signed-off-by: default avatarHans de Goede <hdegoede@redhat.com>
parent 2772f6d5
......@@ -195,6 +195,12 @@ M: Siarhei Siamashka <siarhei.siamashka@gmail.com>
S: Maintained
F: configs/MSI_Primo81_defconfig
SINLINX SINA31s BOARD
M: Chen-Yu Tsai <wens@csie.org>
S: Maintained
F: configs/Sinlinx_SinA31s_defconfig
W: http://linux-sunxi.org/Sinlinx_SinA31s
SINLINX SINA33 BOARD
M: Chen-Yu Tsai <wens@csie.org>
S: Maintained
......
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
CONFIG_MACH_SUN6I=y
CONFIG_DRAM_CLK=432
CONFIG_DRAM_ZQ=251
CONFIG_MMC0_CD_PIN="PA4"
CONFIG_MMC3_PINS="PC"
CONFIG_MMC_SUNXI_SLOT_EXTRA=3
CONFIG_USB1_VBUS_PIN=""
CONFIG_USB2_VBUS_PIN=""
CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31s-sina31s"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
CONFIG_ETH_DESIGNWARE=y
CONFIG_AXP_DLDO1_VOLT=3300
CONFIG_USB_EHCI_HCD=y
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment