Commit c1244e85 authored by Steve Sakoman's avatar Steve Sakoman Committed by Sandeep Paulraj

ARMV7: OMAP4: Fix Panda pinmux setting to enable Wifi/BT Module

This patch corrects the pinmux settings to enable proper functioning
of the wifi/bluetooth module.
Signed-off-by: 's avatarSteve Sakoman <steve@sakoman.com>
Signed-off-by: 's avatarSandeep Paulraj <s-paulraj@ti.com>
parent 85d3eba9
......@@ -53,7 +53,7 @@ const struct pad_conf_entry core_padconf_array[] = {
{GPMC_A19, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_row7 */
{GPMC_A20, (IEN | M3)}, /* gpio_44 */
{GPMC_A21, (M3)}, /* gpio_45 */
{GPMC_A22, (OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_col6 */
{GPMC_A22, (M3)}, /* gpio_46 */
{GPMC_A23, (OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_col7 */
{GPMC_A24, (PTD | M3)}, /* gpio_48 */
{GPMC_A25, (PTD | M3)}, /* gpio_49 */
......@@ -69,9 +69,9 @@ const struct pad_conf_entry core_padconf_array[] = {
{GPMC_NBE0_CLE, (M3)}, /* gpio_59 */
{GPMC_NBE1, (PTD | M3)}, /* gpio_60 */
{GPMC_WAIT0, (PTU | IEN | M3)}, /* gpio_61 */
{GPMC_WAIT1, (IEN | M3)}, /* gpio_62 */
{GPMC_WAIT1, (PTD | OFF_EN | OFF_PD | OFF_OUT_PTD | M3)}, /* gpio_62 */
{C2C_DATA11, (PTD | M3)}, /* gpio_100 */
{C2C_DATA12, (M1)}, /* dsi1_te0 */
{C2C_DATA12, (PTU | IEN | M3)}, /* gpio_101 */
{C2C_DATA13, (PTD | M3)}, /* gpio_102 */
{C2C_DATA14, (M1)}, /* dsi2_te0 */
{C2C_DATA15, (PTD | M3)}, /* gpio_104 */
......@@ -189,12 +189,12 @@ const struct pad_conf_entry core_padconf_array[] = {
{USBB2_ULPITLL_DAT7, (IEN | M5)}, /* dispc2_data11 */
{USBB2_HSIC_DATA, (PTD | OFF_EN | OFF_OUT_PTU | M3)}, /* gpio_169 */
{USBB2_HSIC_STROBE, (PTD | OFF_EN | OFF_OUT_PTU | M3)}, /* gpio_170 */
{UNIPRO_TX0, (OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_col0 */
{UNIPRO_TX0, (PTD | IEN | M3)}, /* gpio_171 */
{UNIPRO_TY0, (OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_col1 */
{UNIPRO_TX1, (OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_col2 */
{UNIPRO_TY1, (OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_col3 */
{UNIPRO_TX2, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M3)}, /* gpio_0 */
{UNIPRO_TY2, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M3)}, /* gpio_1 */
{UNIPRO_TX2, (PTU | IEN | M3)}, /* gpio_0 */
{UNIPRO_TY2, (PTU | IEN | M3)}, /* gpio_1 */
{UNIPRO_RX0, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_row0 */
{UNIPRO_RY0, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_row1 */
{UNIPRO_RX1, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_row2 */
......@@ -205,7 +205,7 @@ const struct pad_conf_entry core_padconf_array[] = {
{USBA0_OTG_DP, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* usba0_otg_dp */
{USBA0_OTG_DM, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* usba0_otg_dm */
{FREF_CLK1_OUT, (M0)}, /* fref_clk1_out */
{FREF_CLK2_OUT, (M0)}, /* fref_clk2_out */
{FREF_CLK2_OUT, (PTU | IEN | M3)}, /* gpio_182 */
{SYS_NIRQ1, (PTU | IEN | M0)}, /* sys_nirq1 */
{SYS_NIRQ2, (PTU | IEN | M0)}, /* sys_nirq2 */
{SYS_BOOT0, (PTU | IEN | M3)}, /* gpio_184 */
......@@ -230,7 +230,7 @@ const struct pad_conf_entry core_padconf_array[] = {
{DPM_EMU13, (IEN | M5)}, /* dispc2_data6 */
{DPM_EMU14, (IEN | M5)}, /* dispc2_data5 */
{DPM_EMU15, (IEN | M5)}, /* dispc2_data4 */
{DPM_EMU16, (IEN | M5)}, /* dispc2_data3 */
{DPM_EMU16, (M3)}, /* gpio_27 */
{DPM_EMU17, (IEN | M5)}, /* dispc2_data2 */
{DPM_EMU18, (IEN | M5)}, /* dispc2_data1 */
{DPM_EMU19, (IEN | M5)}, /* dispc2_data0 */
......@@ -248,7 +248,7 @@ const struct pad_conf_entry wkup_padconf_array[] = {
{PAD0_FREF_SLICER_IN, (M0)}, /* fref_slicer_in */
{PAD1_FREF_CLK_IOREQ, (M0)}, /* fref_clk_ioreq */
{PAD0_FREF_CLK0_OUT, (M2)}, /* sys_drm_msecure */
{PAD1_FREF_CLK3_REQ, (PTU | IEN | M0)}, /* # */
{PAD1_FREF_CLK3_REQ, (M3)}, /* gpio_wk30 */
{PAD0_FREF_CLK3_OUT, (M0)}, /* fref_clk3_out */
{PAD1_FREF_CLK4_REQ, (PTU | OFF_EN | OFF_OUT_PTU | M3)}, /* led status_1 */
{PAD0_FREF_CLK4_OUT, (PTU | OFF_EN | OFF_OUT_PTU | M3)}, /* led status_2 */
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment