Commit c649e3c9 authored by Simon Glass's avatar Simon Glass

dm: scsi: Rename CONFIG_CMD_SCSI to CONFIG_SCSI

This option currently enables both the command and the SCSI functionality.
Rename the existing option to CONFIG_SCSI since most of the code relates
to the feature.
Signed-off-by: default avatarSimon Glass <sjg@chromium.org>
parent 2765c4d1
......@@ -1066,7 +1066,7 @@ The following options need to be configured:
CONFIG_CMD_RUN run command in env variable
CONFIG_CMD_SANDBOX * sb command to access sandbox features
CONFIG_CMD_SAVES * save S record dump
CONFIG_CMD_SCSI * SCSI Support
CONFIG_SCSI * SCSI Support
CONFIG_CMD_SDRAM * print SDRAM configuration information
(requires CONFIG_CMD_I2C)
CONFIG_CMD_SETGETDCR Support for DCR Register access
......@@ -1254,7 +1254,7 @@ The following options need to be configured:
CONFIG_MTD_PARTITIONS Memory Technology Device partition table.
If IDE or SCSI support is enabled (CONFIG_CMD_IDE or
CONFIG_CMD_SCSI) you must configure support for at
CONFIG_SCSI) you must configure support for at
least one non-MTD partition type as well.
- IDE Reset method:
......
......@@ -67,7 +67,7 @@ void dev_stor_init(void)
specs[ENUM_SATA].type = DEV_TYP_STOR | DT_STOR_SATA;
specs[ENUM_SATA].name = "sata";
#endif
#if defined(CONFIG_CMD_SCSI)
#if defined(CONFIG_SCSI)
specs[ENUM_SCSI].max_dev = CONFIG_SYS_SCSI_MAX_DEVICE;
specs[ENUM_SCSI].enum_started = 0;
specs[ENUM_SCSI].enum_ended = 0;
......
......@@ -82,7 +82,7 @@
/* SATA */
#define AHCI_BASE_ADDR (CONFIG_SYS_IMMR + 0x02200000)
#define CONFIG_BOARD_LATE_INIT
#define CONFIG_CMD_SCSI
#define CONFIG_SCSI
#define CONFIG_LIBATA
#define CONFIG_SCSI_AHCI
#define CONFIG_SCSI_AHCI_PLAT
......
......@@ -32,8 +32,8 @@ Changed files:
- include/cmd_bsp.h added PIP405 commands definitions
- include/cmd_condefs.h added Floppy and SCSI support
- include/cmd_disk.h changed to work with block device description
- include/config_LANTEC.h excluded CONFIG_CMD_FDC and CONFIG_CMD_SCSI
- include/config_hymod.h excluded CONFIG_CMD_FDC and CONFIG_CMD_SCSI
- include/config_LANTEC.h excluded CONFIG_CMD_FDC and CONFIG_SCSI
- include/config_hymod.h excluded CONFIG_CMD_FDC and CONFIG_SCSI
- include/flash.h added INTEL_ID_28F320C3T 0x88C488C4
- include/i2c.h added "defined(CONFIG_PIP405)"
- include/image.h added IH_OS_U_BOOT, IH_TYPE_FIRMWARE
......@@ -86,7 +86,7 @@ section "Changes".
New Commands:
-------------
CONFIG_CMD_SCSI SCSI Support
CONFIG_SCSI SCSI Support
CONFIG_CMF_FDC Floppy disk support
IDE additions:
......
......@@ -112,7 +112,7 @@ obj-$(CONFIG_CMD_REMOTEPROC) += remoteproc.o
obj-$(CONFIG_SANDBOX) += host.o
obj-$(CONFIG_CMD_SATA) += sata.o
obj-$(CONFIG_CMD_SF) += sf.o
obj-$(CONFIG_CMD_SCSI) += scsi.o
obj-$(CONFIG_SCSI) += scsi.o
obj-$(CONFIG_CMD_SHA1SUM) += sha1sum.o
obj-$(CONFIG_CMD_SETEXPR) += setexpr.o
obj-$(CONFIG_CMD_SOFTSWITCH) += softswitch.o
......@@ -157,7 +157,7 @@ endif # !CONFIG_SPL_BUILD
ifdef CONFIG_SPL_BUILD
ifdef CONFIG_SPL_SATA_SUPPORT
obj-$(CONFIG_CMD_SCSI) += scsi.o
obj-$(CONFIG_SCSI) += scsi.o
endif
endif # CONFIG_SPL_BUILD
......
......@@ -8,7 +8,7 @@
#include <command.h>
#include <part.h>
#if defined(CONFIG_CMD_IDE) || defined(CONFIG_CMD_SCSI) || \
#if defined(CONFIG_CMD_IDE) || defined(CONFIG_SCSI) || \
defined(CONFIG_USB_STORAGE)
int common_diskboot(cmd_tbl_t *cmdtp, const char *intf, int argc,
char *const argv[])
......
......@@ -620,7 +620,7 @@ static int initr_ambapp_print(void)
}
#endif
#if defined(CONFIG_CMD_SCSI)
#if defined(CONFIG_SCSI)
static int initr_scsi(void)
{
puts("SCSI: ");
......@@ -923,7 +923,7 @@ init_fnc_t init_sequence_r[] = {
initr_ambapp_print,
#endif
#endif
#ifdef CONFIG_CMD_SCSI
#ifdef CONFIG_SCSI
INIT_FUNC_WATCHDOG_RESET
initr_scsi,
#endif
......
......@@ -28,7 +28,7 @@ const struct block_drvr block_drvr[] = {
#if defined(CONFIG_CMD_SATA)
{.name = "sata", .get_dev = sata_get_dev, },
#endif
#if defined(CONFIG_CMD_SCSI)
#if defined(CONFIG_SCSI)
{ .name = "scsi", .get_dev = scsi_get_dev, },
#endif
#if defined(CONFIG_CMD_USB) && defined(CONFIG_USB_STORAGE)
......
......@@ -33,7 +33,7 @@
#define PRINTF(fmt,args...)
#endif
#if defined(CONFIG_CMD_SCSI) && defined(CONFIG_SCSI_SYM53C8XX)
#if defined(CONFIG_SCSI) && defined(CONFIG_SCSI_SYM53C8XX)
#undef SCSI_SINGLE_STEP
/*
......
......@@ -1254,7 +1254,7 @@ int file_fat_detectfs(void)
#if defined(CONFIG_CMD_IDE) || \
defined(CONFIG_CMD_SATA) || \
defined(CONFIG_CMD_SCSI) || \
defined(CONFIG_SCSI) || \
defined(CONFIG_CMD_USB) || \
defined(CONFIG_MMC)
printf("Interface: ");
......
......@@ -45,7 +45,7 @@
#define CONFIG_CMD_READ /* Read data from partition */
#define CONFIG_CMD_SANDBOX /* sb command to access sandbox features */
#define CONFIG_CMD_SAVES /* save S record dump */
#define CONFIG_CMD_SCSI /* SCSI Support */
#define CONFIG_SCSI /* SCSI Support */
#define CONFIG_CMD_SDRAM /* SDRAM DIMM SPD info printout */
#define CONFIG_CMD_TERMINAL /* built-in Serial Terminal */
#define CONFIG_CMD_UBI /* UBI Support */
......
......@@ -165,7 +165,7 @@
BOOT_TARGET_DEVICES_references_SATA_without_CONFIG_CMD_SATA
#endif
#ifdef CONFIG_CMD_SCSI
#ifdef CONFIG_SCSI
#define BOOTENV_RUN_SCSI_INIT "run scsi_init; "
#define BOOTENV_SET_SCSI_NEED_INIT "setenv scsi_need_init; "
#define BOOTENV_SHARED_SCSI \
......@@ -185,9 +185,9 @@
#define BOOTENV_SET_SCSI_NEED_INIT
#define BOOTENV_SHARED_SCSI
#define BOOTENV_DEV_SCSI \
BOOT_TARGET_DEVICES_references_SCSI_without_CONFIG_CMD_SCSI
BOOT_TARGET_DEVICES_references_SCSI_without_CONFIG_SCSI
#define BOOTENV_DEV_NAME_SCSI \
BOOT_TARGET_DEVICES_references_SCSI_without_CONFIG_CMD_SCSI
BOOT_TARGET_DEVICES_references_SCSI_without_CONFIG_SCSI
#endif
#ifdef CONFIG_CMD_IDE
......
......@@ -45,7 +45,7 @@
/* Rather than repeat this expression each time, add a define for it */
#if defined(CONFIG_CMD_IDE) || \
defined(CONFIG_CMD_SATA) || \
defined(CONFIG_CMD_SCSI) || \
defined(CONFIG_SCSI) || \
defined(CONFIG_CMD_USB) || \
defined(CONFIG_CMD_PART) || \
defined(CONFIG_CMD_GPT) || \
......
......@@ -373,7 +373,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
#if defined(CONFIG_PCI)
#define CONFIG_CMD_PCI
#define CONFIG_CMD_SCSI
#define CONFIG_SCSI
#endif
/*
......
......@@ -576,7 +576,7 @@
#if defined(CONFIG_PCI)
#define CONFIG_CMD_PCI
#define CONFIG_CMD_SCSI
#define CONFIG_SCSI
#endif
/*
......
......@@ -449,7 +449,7 @@
#if defined(CONFIG_PCI)
#define CONFIG_CMD_PCI
#define CONFIG_CMD_SCSI
#define CONFIG_SCSI
#endif
#define CONFIG_WATCHDOG /* watchdog enabled */
......
......@@ -610,7 +610,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
#if defined(CONFIG_PCI)
#define CONFIG_CMD_PCI
#define CONFIG_CMD_SCSI
#define CONFIG_SCSI
#endif
#undef CONFIG_WATCHDOG /* watchdog disabled */
......
......@@ -43,7 +43,7 @@
#define CONFIG_CMD_EEPROM
#define CONFIG_CMD_REGINFO
#define CONFIG_CMD_FDC
#define CONFIG_CMD_SCSI
#define CONFIG_SCSI
#define CONFIG_CMD_DATE
#define CONFIG_CMD_SDRAM
#define CONFIG_CMD_SAVES
......
......@@ -75,7 +75,7 @@
/* SATA */
#define CONFIG_BOARD_LATE_INIT
#define CONFIG_CMD_SCSI
#define CONFIG_SCSI
#define CONFIG_LIBATA
#define CONFIG_SCSI_AHCI
#define CONFIG_SCSI_AHCI_PLAT
......
......@@ -60,7 +60,7 @@
#define CONFIG_SPL_SATA_BOOT_DEVICE 0
#define CONFIG_SYS_SATA_FAT_BOOT_PARTITION 1
#define CONFIG_CMD_SCSI
#define CONFIG_SCSI
#define CONFIG_LIBATA
#define CONFIG_SCSI_AHCI
#define CONFIG_SCSI_AHCI_PLAT
......
......@@ -27,7 +27,7 @@
#define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */
#define CONFIG_CMD_ENV
#define CONFIG_CMD_PCI
#define CONFIG_CMD_SCSI
#define CONFIG_SCSI
/* I2C */
#define CONFIG_SYS_I2C
......
......@@ -230,7 +230,7 @@
/* SATA */
#define CONFIG_BOARD_LATE_INIT
#define CONFIG_CMD_SCSI
#define CONFIG_SCSI
#define CONFIG_LIBATA
#define CONFIG_SCSI_AHCI
#define CONFIG_SCSI_AHCI_PLAT
......
......@@ -18,7 +18,7 @@
#undef CONFIG_VIDEO
#undef CONFIG_CFB_CONSOLE
#undef CONFIG_SCSI_AHCI
#undef CONFIG_CMD_SCSI
#undef CONFIG_SCSI
#undef CONFIG_INTEL_ICH6_GPIO
#undef CONFIG_USB_EHCI_PCI
......
......@@ -29,7 +29,7 @@
/* SATA is not supported in Quark SoC */
#undef CONFIG_SCSI_AHCI
#undef CONFIG_CMD_SCSI
#undef CONFIG_SCSI
/* Video is not supported in Quark SoC */
#undef CONFIG_VIDEO
......
......@@ -51,7 +51,7 @@
/*
* Command line configuration.
*/
#define CONFIG_CMD_SCSI
#define CONFIG_SCSI
#define CONFIG_BOOT_RETRY_TIME -1
#define CONFIG_RESET_TO_RETRY
......
......@@ -108,7 +108,7 @@ unsigned long get_board_ddr_clk(void);
#define CONFIG_LIBATA
#define CONFIG_SCSI_AHCI
#define CONFIG_SCSI_AHCI_PLAT
#define CONFIG_CMD_SCSI
#define CONFIG_SCSI
#define CONFIG_DOS_PARTITION
#define CONFIG_BOARD_LATE_INIT
......
......@@ -44,7 +44,7 @@ unsigned long get_board_ddr_clk(void);
#define CONFIG_LIBATA
#define CONFIG_SCSI_AHCI
#define CONFIG_SCSI_AHCI_PLAT
#define CONFIG_CMD_SCSI
#define CONFIG_SCSI
#define CONFIG_DOS_PARTITION
#define CONFIG_BOARD_LATE_INIT
......
......@@ -62,7 +62,7 @@ unsigned long get_board_sys_clk(void);
#define CONFIG_LIBATA
#define CONFIG_SCSI_AHCI
#define CONFIG_SCSI_AHCI_PLAT
#define CONFIG_CMD_SCSI
#define CONFIG_SCSI
#define CONFIG_DOS_PARTITION
#define CONFIG_BOARD_LATE_INIT
......
......@@ -115,7 +115,7 @@
/* Max time to hold reset on this board, see doc/README.omap-reset-time */
#define CONFIG_OMAP_PLATFORM_RESET_TIME_MAX_USEC 16296
#define CONFIG_CMD_SCSI
#define CONFIG_SCSI
#define CONFIG_LIBATA
#define CONFIG_SCSI_AHCI
#define CONFIG_SCSI_AHCI_PLAT
......
......@@ -43,7 +43,7 @@
#define CONFIG_ATAPI
#undef CONFIG_SCSI_AHCI
#undef CONFIG_CMD_SCSI
#undef CONFIG_SCSI
#else
#define CONFIG_SCSI_DEV_LIST \
{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_AHCI}
......
......@@ -125,7 +125,7 @@
#define CONFIG_SYS_SCSI_MAX_LUN 1
#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
CONFIG_SYS_SCSI_MAX_LUN)
#define CONFIG_CMD_SCSI
#define CONFIG_SCSI
#endif
#define CONFIG_SETUP_MEMORY_TAGS
......
......@@ -100,7 +100,7 @@
#define CONFIG_CMD_IRQ
#define CONFIG_CMD_PCI
#define CONFIG_CMD_GETTIME
#define CONFIG_CMD_SCSI
#define CONFIG_SCSI
#define CONFIG_CMD_ZBOOT
......
......@@ -201,7 +201,7 @@
#define CONFIG_SYS_SCSI_MAX_LUN 1
#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
CONFIG_SYS_SCSI_MAX_LUN)
#define CONFIG_CMD_SCSI
#define CONFIG_SCSI
#endif
#define CONFIG_SYS_BOOTM_LEN (60 * 1024 * 1024)
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment