Commit d049cc7f authored by Wolfgang Denk's avatar Wolfgang Denk

Coding style cleanup, update CHANGELOG

Signed-off-by: default avatarWolfgang Denk <wd@denx.de>
parent fd0b1fe3
commit fd0b1fe3c388a77e8fe00cdd930ca317a91198d4
Author: Dave Liu <r63238@freescale.com>
Date: Wed Mar 26 22:55:32 2008 +0800
drivers: add the support for Freescale SATA controller
Add the Freescale on-chip SATA controller driver to u-boot,
The SATA controller is used on the 837x and 8315 targets,
The driver can be used to load kernel, fs and dtb.
The features list:
- 1.5/3 Gbps link speed
- LBA48, LBA28 support
- DMA and FPDMA support
- Two ports support
Signed-off-by: Dave Liu <daveliu@freescale.com>
commit bede87f4c87c3ccd868cc60ebf792e0560c6d024
Author: Dave Liu <r63238@freescale.com>
Date: Wed Mar 26 22:54:44 2008 +0800
ata: add the readme for SATA command line
Signed-off-by: Dave Liu <daveliu@freescale.com>
commit cd54081cd479e542fc399b8a40651ff11a1ad849
Author: Dave Liu <r63238@freescale.com>
Date: Wed Mar 26 22:53:24 2008 +0800
ata: enable the sata initialize on boot up
Signed-off-by: Dave Liu <daveliu@freescale.com>
commit 69386383c5c2b323c66495b0b0cef6a9714d83bf
Author: Dave Liu <r63238@freescale.com>
Date: Wed Mar 26 22:52:36 2008 +0800
ata: add the fis struct for SATA
Signed-off-by: Dave Liu <daveliu@freescale.com>
commit ffc664e80dfb2e17de0df5ad39e91a02e9c361bc
Author: Dave Liu <r63238@freescale.com>
Date: Wed Mar 26 22:51:44 2008 +0800
ata: add the libata support
add simple libata support in u-boot
Signed-off-by: Dave Liu <daveliu@freescale.com>
commit 8e9bb43429e50df55fa41932cbe65841ff579220
Author: Dave Liu <r63238@freescale.com>
Date: Wed Mar 26 22:50:45 2008 +0800
ata: make the ata_piix driver using new SATA framework
original ata_piix driver is using IDE framework, not real
SATA framework. For now, the ata_piix driver is only used
by x86 sc520_cdp board. This patch makes the ata_piix driver
use the new SATA framework, so
- remove the duplicated command stuff
- remove the CONFIG_CMD_IDE define in the sc520_cdp.h
- add the CONFIG_CMD_SATA define to sc520_cdp.h
Signed-off-by: Dave Liu <daveliu@freescale.com>
commit c7057b529c3c3cb9c0ac9060686a4068f1491bbe
Author: Dave Liu <r63238@freescale.com>
Date: Wed Mar 26 22:49:44 2008 +0800
ata: add the support for SATA framework
- add the SATA framework
- add the SATA command line
Signed-off-by: Dave Liu <daveliu@freescale.com>
commit 83c7f470a4ce94f33600f11ae85ce4dcf00aa90c
Author: Dave Liu <r63238@freescale.com>
Date: Wed Mar 26 22:48:18 2008 +0800
ata: merge the header of ata_piix driver
move the sata.h from include/ to drivers/block/ata_piix.h
Signed-off-by: Dave Liu <daveliu@freescale.com>
commit 9eef62804d9695425b24c87b46a61a7fa74afee0
Author: Dave Liu <r63238@freescale.com>
Date: Wed Mar 26 22:47:06 2008 +0800
ata: merge the ata_piix driver
move the cmd_sata.c from common/ to drivers/ata_piix.c,
the cmd_sata.c have some part of ata_piix controller drivers.
consolidate the driver to have better framework.
Signed-off-by: Dave Liu <daveliu@freescale.com>
commit 5b5eb9ca5b778f763bcf332697b35cc1e747626e
Author: Wolfgang Denk <wd@denx.de>
Date: Wed Mar 26 15:38:47 2008 +0100
Coding style cleanup.
Signed-off-by: Wolfgang Denk <wd@denx.de>
commit da8808df7a9cef5a3d2ee286ef9ebf9de1780660
Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
Date: Wed Mar 26 13:02:13 2008 +0100
Add CFG_RTC_DS1337_NOOSC to turn off OSC output
The default settings for RTC DS1337 keeps the OSC
output, 32,768 Hz, on. This add CFG_RTC_DS1337_NOOSC to
turn it off.
Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
commit 438a4c11260b4ea9805039b0b4f92f9df5306b02
Author: Wolfgang Denk <wd@denx.de>
Date: Wed Mar 26 11:48:46 2008 +0100
Cleanup coding style, update CHANGELOG
Signed-off-by: Wolfgang Denk <wd@denx.de>
commit 218ca724c08ca8a649f0917cf201cf23d4b33f39
Author: Wolfgang Denk <wd@denx.de>
Date: Wed Mar 26 10:40:12 2008 +0100
......
......@@ -9,10 +9,10 @@
=> sata info
SATA device 0: Model: ST3320620AS Firm: 3.AAD Ser#: 4QF01ZTN
Type: Hard Disk
Supports 48-bit addressing
Capacity: 305245.3 MB = 298.0 GB (625142448 x 512)
SATA device 0: Model: ST3320620AS Firm: 3.AAD Ser#: 4QF01ZTN
Type: Hard Disk
Supports 48-bit addressing
Capacity: 305245.3 MB = 298.0 GB (625142448 x 512)
1.1 How to save the kernel, filesystem, dtb to SATA hard disk with raw?
......@@ -48,16 +48,16 @@ SATA device 0: Model: ST3320620AS Firm: 3.AAD Ser#: 4QF01ZTN
U-boot doesn't support ext2 write to hard disk, so
you have to write the image to hard disk under Linux env,
before you load image from ext2 filesystem.
before you load image from ext2 filesystem.
=> ext2ls sata 0:1 /
<DIR> 4096 .
<DIR> 4096 ..
<DIR> 16384 lost+found
1352023 uImage.837x
3646377 ramdisk.837x
12288 mpc837xemds.dtb
12 hello.txt
<DIR> 4096 .
<DIR> 4096 ..
<DIR> 16384 lost+found
1352023 uImage.837x
3646377 ramdisk.837x
12288 mpc837xemds.dtb
12 hello.txt
=> ext2load sata 0:1 200000 /uImage.837x
......
......@@ -109,7 +109,7 @@ void ata_dump_id(u16 *id)
n_sectors = ata_id_n_sectors(id);
printf("Capablity: %d sectors\n\r", n_sectors);
printf("id[49]: capabilities ==0x%04x\n"
printf ("id[49]: capabilities ==0x%04x\n"
"id[53]: field valid ==0x%04x\n"
"id[63]: mwdma ==0x%04x\n"
"id[64]: pio ==0x%04x\n"
......@@ -120,14 +120,14 @@ void ata_dump_id(u16 *id)
id[64],
id[75]);
printf("id[76]: sata capablity ==0x%04x\n"
printf ("id[76]: sata capablity ==0x%04x\n"
"id[78]: sata features supported ==0x%04x\n"
"id[79]: sata features enable ==0x%04x\n",
id[76],
id[78],
id[79]);
printf("id[80]: major version ==0x%04x\n"
printf ("id[80]: major version ==0x%04x\n"
"id[81]: minor version ==0x%04x\n"
"id[82]: command set supported 1 ==0x%04x\n"
"id[83]: command set supported 2 ==0x%04x\n"
......@@ -137,7 +137,7 @@ void ata_dump_id(u16 *id)
id[82],
id[83],
id[84]);
printf("id[85]: command set enable 1 ==0x%04x\n"
printf ("id[85]: command set enable 1 ==0x%04x\n"
"id[86]: command set enable 2 ==0x%04x\n"
"id[87]: command set default ==0x%04x\n"
"id[88]: udma ==0x%04x\n"
......
......@@ -168,13 +168,13 @@ enum {
#define ata_id_has_ncq(id) ((id)[76] & (1 << 8))
#define ata_id_queue_depth(id) (((id)[75] & 0x1f) + 1)
#define ata_id_u32(id,n) \
(((u32) (id)[(n) + 1] << 16) | ((u32) (id)[(n)]))
#define ata_id_u64(id,n) \
( ((u64) (id)[(n) + 3] << 48) | \
((u64) (id)[(n) + 2] << 32) | \
((u64) (id)[(n) + 1] << 16) | \
((u64) (id)[(n) + 0]) )
#define ata_id_u32(id,n) \
(((u32) (id)[(n) + 1] << 16) | ((u32) (id)[(n)]))
#define ata_id_u64(id,n) \
( ((u64) (id)[(n) + 3] << 48) | \
((u64) (id)[(n) + 2] << 32) | \
((u64) (id)[(n) + 1] << 16) | \
((u64) (id)[(n) + 0]) )
static inline unsigned int ata_id_major_version(const u16 *id)
......
......@@ -27,8 +27,8 @@
typedef struct block_dev_desc {
int if_type; /* type of the interface */
int dev; /* device number */
unsigned char part_type; /* partition type */
int dev; /* device number */
unsigned char part_type; /* partition type */
unsigned char target; /* target SCSI ID */
unsigned char lun; /* target LUN */
unsigned char type; /* device type */
......@@ -36,9 +36,9 @@ typedef struct block_dev_desc {
#ifdef CONFIG_LBA48
unsigned char lba48; /* device can use 48bit addr (ATA/ATAPI v7) */
#endif
lbaint_t lba; /* number of blocks */
lbaint_t lba; /* number of blocks */
unsigned long blksz; /* block size */
char vendor [40+1]; /* IDE model, SCSI Vendor */
char vendor [40+1]; /* IDE model, SCSI Vendor */
char product[20+1]; /* IDE Serial no, SCSI product */
char revision[8+1]; /* firmware revision */
unsigned long (*block_read)(int dev,
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment