Commit d2a9568c authored by York Sun's avatar York Sun Committed by Kumar Gala

mpc85xx: Adding more registers and options

This patch exposes more registers which can be used by the DDR drivers or
interactive debugging. U-boot doesn't use all the registers in DDRC.
When advanced tuning is required, writing to those registers is needed.

Add writing to cdr1, cdr2, err_disable, err_int_en and debug registers
Add options to override rcw, address parity to RDIMMs.
Use array for debug registers.
Signed-off-by: default avatarYork Sun <yorksun@freescale.com>
Signed-off-by: default avatarKumar Gala <galak@kernel.crashing.org>
parent 8ed20f2c
/*
* Copyright 2008 Freescale Semiconductor, Inc.
* Copyright 2008-2011 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
......@@ -9,6 +9,7 @@
#include <common.h>
#include <asm/io.h>
#include <asm/fsl_ddr_sdram.h>
#include <asm/processor.h>
#if (CONFIG_CHIP_SELECTS_PER_CTRL > 4)
#error Invalid setting for CONFIG_CHIP_SELECTS_PER_CTRL
......@@ -79,6 +80,12 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
out_be32(&ddr->ddr_sr_cntr, regs->ddr_sr_cntr);
out_be32(&ddr->ddr_sdram_rcw_1, regs->ddr_sdram_rcw_1);
out_be32(&ddr->ddr_sdram_rcw_2, regs->ddr_sdram_rcw_2);
out_be32(&ddr->ddr_cdr1, regs->ddr_cdr1);
out_be32(&ddr->ddr_cdr2, regs->ddr_cdr2);
out_be32(&ddr->err_disable, regs->err_disable);
out_be32(&ddr->err_int_en, regs->err_int_en);
for (i = 0; i < 32; i++)
out_be32(&ddr->debug[i], regs->debug[i]);
/* Set, but do not enable the memory */
temp_sdram_cfg = regs->ddr_sdram_cfg;
......@@ -93,8 +100,7 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
if ((((in_be32(&ddr->sdram_cfg) >> 24) & 0x7) == SDRAM_TYPE_DDR2)
&& in_be32(&ddr->sdram_cfg) & 0x80000) {
/* set DEBUG_1[31] */
u32 temp = in_be32(&ddr->debug_1);
out_be32(&ddr->debug_1, temp | 1);
setbits_be32(&ddr->debug[0], 1);
}
#endif
......
......@@ -120,6 +120,11 @@ typedef struct fsl_ddr_cfg_regs_s {
unsigned int ddr_sdram_rcw_1;
unsigned int ddr_sdram_rcw_2;
unsigned int ddr_eor;
unsigned int ddr_cdr1;
unsigned int ddr_cdr2;
unsigned int err_disable;
unsigned int err_int_en;
unsigned int debug[32];
} fsl_ddr_cfg_regs_t;
typedef struct memctl_options_partial_s {
......@@ -175,6 +180,7 @@ typedef struct memctl_options_s {
/* mirrior DIMMs for DDR3 */
unsigned int mirrored_dimm;
unsigned int quad_rank_present;
unsigned int ap_en; /* address parity enable for RDIMM */
/* Global Timing Parameters */
unsigned int cas_latency_override;
......@@ -210,6 +216,12 @@ typedef struct memctl_options_s {
unsigned int zq_en;
/* Write leveling */
unsigned int wrlvl_en;
/* RCW override for RDIMM */
unsigned int rcw_override;
unsigned int rcw_1;
unsigned int rcw_2;
/* control register 1 */
unsigned int ddr_cdr1;
} memctl_options_t;
extern phys_size_t fsl_ddr_sdram(void);
......
......@@ -222,25 +222,8 @@ typedef struct ccsr_ddr {
u32 capture_ext_address; /* Error Extended Addr Capture */
u32 err_sbe; /* Single-Bit ECC Error Management */
u8 res11[164];
u32 debug_1;
u32 debug_2;
u32 debug_3;
u32 debug_4;
u32 debug_5;
u32 debug_6;
u32 debug_7;
u32 debug_8;
u32 debug_9;
u32 debug_10;
u32 debug_11;
u32 debug_12;
u32 debug_13;
u32 debug_14;
u32 debug_15;
u32 debug_16;
u32 debug_17;
u32 debug_18;
u8 res12[184];
u32 debug[32]; /* debug_1 to debug_32 */
u8 res12[128];
} ccsr_ddr_t;
#define DDR_EOR_RD_BDW_OPT_DIS 0x80000000 /* Read BDW Opt. disable */
......
......@@ -240,7 +240,7 @@ static phys_size_t sdram_setup(int casl)
* 4. Before DDR_SDRAM_CFG[MEM_EN] set, write D3[21] to disable data
* training
*/
ddr->debug_3 |= 0x00000400;
ddr->debug[2] |= 0x00000400;
/*
* 5. Wait 200 micro-seconds
......@@ -282,18 +282,18 @@ static phys_size_t sdram_setup(int casl)
/*
* 8. Clear D3[21] to re-enable data training
*/
ddr->debug_3 &= ~0x00000400;
ddr->debug[2] &= ~0x00000400;
/*
* 9. Set D2(21) to force data training to run
*/
ddr->debug_2 |= 0x00000400;
ddr->debug[1] |= 0x00000400;
/*
* 10. Poll on D2[21] until it is cleared by hardware
*/
asm ("sync;isync;msync");
while (ddr->debug_2 & 0x00000400)
while (ddr->debug[1] & 0x00000400)
asm ("eieio");
/*
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment