Commit d3aa051e authored by Han Pengfei's avatar Han Pengfei Committed by Hans de Goede

sun6i: Add support for the Mixtile LOFT-Q board

The Mixtile LOFT-Q is an A31 based board with 2G RAM, 8G EMMC, sdio wifi,
1Gbit ethernet, HDMI display, toslink audio plug, 4 USB2.0 port, external
USB2SATA connector, sd card plug, 3x60 external fpic expansion connector,
NXP JN5168 zigbee gw, remote support.

Also see http://focalcrest.com/en/pc.html#pro02Signed-off-by: default avatarHan Pengfei <pengphei@sina.com>
Acked-by: default avatarHans de Goede <hdegoede@redhat.com>
Signed-off-by: default avatarHans de Goede <hdegoede@redhat.com>
parent f33cdaa4
......@@ -120,6 +120,11 @@ M: Ian Campbell <ijc@hellion.org.uk>
S: Maintained
F: configs/Mele_M5_defconfig
MIXTILE-LOFTQ BOARD
M: Phil Han <pengphei@sina.com>
S: Maintained
F: configs/mixtile_loftq_defconfig
MK808C BOARD
M: Marcus Cooper <codekipper@gmail.com>
S: Maintained
......
# The Mixtile LOFT-Q is an A31 based board with 2G RAM, 8G EMMC, sdio wifi,
# 1Gbit ethernet, HDMI display, toslink audio plug, 4 USB2.0 port, external
# USB2SATA connector, sd card plug, 3x60 external fpic expansion connector,
# NXP JN5168 zigbee gw, remote support.
#
# Also see http://focalcrest.com/en/pc.html#pro02
CONFIG_SPL=y
CONFIG_SYS_EXTRA_OPTIONS="USB_EHCI,SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPA(21)"
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
CONFIG_MACH_SUN6I=y
CONFIG_DRAM_CLK=312
CONFIG_DRAM_ZQ=251
CONFIG_MMC_SUNXI_SLOT=0
CONFIG_MMC_SUNXI_SLOT_EXTRA=2
# Wifi power
CONFIG_AXP221_ALDO1_VOLT=3300
# Vbus gpio for usb1
CONFIG_USB1_VBUS_PIN="PH24"
# No Vbus gpio for usb2
CONFIG_USB2_VBUS_PIN=""
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment