Commit d43ad957 authored by Ye Li's avatar Ye Li

MLK-17278 imx8qxp_mek: Enable USB OTG port on base board

The USB OTG port on MEK base board is not enabled at default, due to the default
design connects it to M2 connector for BT/WIFI.
Since most boards have reworked it, we enable it to support both host and device
mode in u-boot.
Signed-off-by: 's avatarYe Li <ye.li@nxp.com>
Reviewed-by: 's avatarPeng Fan <peng.fan@nxp.com>
parent e08d6911
......@@ -21,19 +21,19 @@ CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_IMX8=y
CONFIG_DM_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_CMD_USB=y
CONFIG_USB=y
CONFIG_USB_STORAGE=y
# CONFIG_CMD_USB_MASS_STORAGE=y
# CONFIG_USB_GADGET=y
# CONFIG_CI_UDC=y
# CONFIG_USB_GADGET_DOWNLOAD=y
# CONFIG_G_DNL_MANUFACTURER="FSL"
# CONFIG_G_DNL_VENDOR_NUM=0x0525
# CONFIG_G_DNL_PRODUCT_NUM=0xa4a5
CONFIG_CMD_USB_MASS_STORAGE=y
CONFIG_USB_GADGET=y
CONFIG_CI_UDC=y
CONFIG_USB_GADGET_DOWNLOAD=y
CONFIG_G_DNL_MANUFACTURER="FSL"
CONFIG_G_DNL_VENDOR_NUM=0x0525
CONFIG_G_DNL_PRODUCT_NUM=0xa4a5
CONFIG_CMD_GPIO=y
CONFIG_DM_GPIO=y
......
......@@ -21,19 +21,19 @@ CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_IMX8=y
CONFIG_DM_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_CMD_USB=y
CONFIG_USB=y
CONFIG_USB_STORAGE=y
# CONFIG_CMD_USB_MASS_STORAGE=y
# CONFIG_USB_GADGET=y
# CONFIG_CI_UDC=y
# CONFIG_USB_GADGET_DOWNLOAD=y
# CONFIG_G_DNL_MANUFACTURER="FSL"
# CONFIG_G_DNL_VENDOR_NUM=0x0525
# CONFIG_G_DNL_PRODUCT_NUM=0xa4a5
CONFIG_CMD_USB_MASS_STORAGE=y
CONFIG_USB_GADGET=y
CONFIG_CI_UDC=y
CONFIG_USB_GADGET_DOWNLOAD=y
CONFIG_G_DNL_MANUFACTURER="FSL"
CONFIG_G_DNL_VENDOR_NUM=0x0525
CONFIG_G_DNL_PRODUCT_NUM=0xa4a5
CONFIG_CMD_GPIO=y
CONFIG_DM_GPIO=y
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment