Commit deb00562 authored by Vipin KUMAR's avatar Vipin KUMAR Committed by Albert ARIBAUD

SPEAr: Configure network support for spear SoCs

Signed-off-by: default avatarVipin Kumar <vipin.kumar@st.com>
Signed-off-by: default avatarAmit Virdi <amit.virdi@st.com>
Signed-off-by: default avatarStefan Roese <sr@denx.de>
parent 8026b1e4
......@@ -31,6 +31,7 @@
#define CONFIG_SPEAR_SYSCNTLBASE (0xFCA00000)
#define CONFIG_SPEAR_TIMERBASE (0xFC800000)
#define CONFIG_SPEAR_MISCBASE (0xFCA80000)
#define CONFIG_SPEAR_ETHBASE 0xE0800000
#define CONFIG_SYS_NAND_CLE (1 << 16)
#define CONFIG_SYS_NAND_ALE (1 << 17)
......
......@@ -22,6 +22,7 @@
*/
#include <common.h>
#include <netdev.h>
#include <nand.h>
#include <asm/io.h>
#include <linux/mtd/fsmc_nand.h>
......@@ -60,3 +61,12 @@ void board_nand_init()
#endif
return;
}
int board_eth_init(bd_t *bis)
{
#if defined(CONFIG_DESIGNWARE_ETH)
return designware_initialize(0, CONFIG_SPEAR_ETHBASE, CONFIG_DW0_PHY);
#else
return -1;
#endif
}
......@@ -23,6 +23,7 @@
*/
#include <common.h>
#include <netdev.h>
#include <nand.h>
#include <asm/io.h>
#include <linux/mtd/fsmc_nand.h>
......@@ -61,3 +62,12 @@ void board_nand_init()
#endif
return;
}
int board_eth_init(bd_t *bis)
{
#if defined(CONFIG_DESIGNWARE_ETH)
return designware_initialize(0, CONFIG_SPEAR_ETHBASE, CONFIG_DW0_PHY);
#else
return -1;
#endif
}
......@@ -23,6 +23,7 @@
*/
#include <common.h>
#include <netdev.h>
#include <nand.h>
#include <asm/io.h>
#include <linux/mtd/fsmc_nand.h>
......@@ -62,3 +63,12 @@ void board_nand_init()
return;
}
int board_eth_init(bd_t *bis)
{
#if defined(CONFIG_DESIGNWARE_ETH)
return designware_initialize(0, CONFIG_SPEAR_ETHBASE, CONFIG_DW0_PHY);
#else
return -1;
#endif
}
......@@ -22,6 +22,7 @@
*/
#include <common.h>
#include <netdev.h>
#include <nand.h>
#include <asm/io.h>
#include <linux/mtd/fsmc_nand.h>
......@@ -55,3 +56,12 @@ void board_nand_init()
#endif
return;
}
int board_eth_init(bd_t *bis)
{
#if defined(CONFIG_DESIGNWARE_ETH)
return designware_initialize(0, CONFIG_SPEAR_ETHBASE, CONFIG_DW0_PHY);
#else
return -1;
#endif
}
......@@ -27,6 +27,14 @@
* Common configurations used for both spear3xx as well as spear6xx
*/
/* Ethernet driver configuration */
#define CONFIG_MII
#define CONFIG_DESIGNWARE_ETH
#define CONFIG_DW_SEARCH_PHY
#define CONFIG_DW0_PHY 1
#define CONFIG_NET_MULTI
#define CONFIG_PHY_RESET_DELAY 10000 /* in usec */
/* USBD driver configuration */
#define CONFIG_DW_UDC
#define CONFIG_USB_DEVICE
......@@ -104,11 +112,13 @@
#define CONFIG_CMD_MEMORY
#define CONFIG_CMD_RUN
#define CONFIG_CMD_SAVES
#define CONFIG_CMD_NET
#define CONFIG_CMD_MII
#define CONFIG_CMD_PING
#define CONFIG_CMD_DHCP
/* This must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <config_cmd_default.h>
#undef CONFIG_CMD_NET
#undef CONFIG_CMD_NFS
/*
* Default Environment Varible definitions
......
......@@ -41,6 +41,9 @@
#include <configs/spear-common.h>
/* Ethernet driver configuration */
#define CONFIG_DW_ALTDESCRIPTOR 1
/* Serial Configuration (PL011) */
#define CONFIG_SYS_SERIAL0 0xD0000000
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment