Commit e153333e authored by Eric Nelson's avatar Eric Nelson Committed by Stefano Babic

i.MX6DL/S: add drive-strength back to pads DISP0_DAT2/DAT10

The pad settings for DISP0_DATA02 and DISP0_DAT10 were not
set in the same way as DISP0_DAT00-23, causing much flicker
in parallel RGB displays on Dual-Lite and Solo processors.

These settings now match the i.MX6 Dual and Quad core versions.

Note that this fixes a regression in commit b47abc36 and that
this is the second time we've had a regression on these two
pads (See commit e654ddf7).
Signed-off-by: default avatarEric Nelson <eric.nelson@boundarydevices.com>
Acked-by: default avatarOtavio Salvador <otavio@ossystems.com.br>
parent 157f45da
......@@ -158,7 +158,7 @@ MX6_PAD_DECL(DISP0_DAT1__IPU1_DISP0_DATA01, 0x03C8, 0x00B4, 0, 0x0000, 0, PAD_CT
MX6_PAD_DECL(DISP0_DAT1__LCD_DATA01, 0x03C8, 0x00B4, 1, 0x0000, 0, 0)
MX6_PAD_DECL(DISP0_DAT1__ECSPI3_MOSI, 0x03C8, 0x00B4, 2, 0x0000, 0, 0)
MX6_PAD_DECL(DISP0_DAT1__GPIO4_IO22, 0x03C8, 0x00B4, 5, 0x0000, 0, 0)
MX6_PAD_DECL(DISP0_DAT10__IPU1_DISP0_DATA10, 0x03CC, 0x00B8, 0, 0x0000, 0, 0)
MX6_PAD_DECL(DISP0_DAT10__IPU1_DISP0_DATA10, 0x03CC, 0x00B8, 0, 0x0000, 0, PAD_CTL_DSE_120ohm)
MX6_PAD_DECL(DISP0_DAT10__LCD_DATA10, 0x03CC, 0x00B8, 1, 0x0000, 0, PAD_CTL_DSE_120ohm)
MX6_PAD_DECL(DISP0_DAT10__GPIO4_IO31, 0x03CC, 0x00B8, 5, 0x0000, 0, 0)
MX6_PAD_DECL(DISP0_DAT11__IPU1_DISP0_DATA11, 0x03D0, 0x00BC, 0, 0x0000, 0, PAD_CTL_DSE_120ohm)
......@@ -206,7 +206,7 @@ MX6_PAD_DECL(DISP0_DAT19__AUD5_RXD, 0x03F0, 0x00DC, 3, 0x07B0, 0, 0)
MX6_PAD_DECL(DISP0_DAT19__AUD4_RXC, 0x03F0, 0x00DC, 4, 0x07A0, 0, 0)
MX6_PAD_DECL(DISP0_DAT19__GPIO5_IO13, 0x03F0, 0x00DC, 5, 0x0000, 0, 0)
MX6_PAD_DECL(DISP0_DAT19__EIM_CS3_B, 0x03F0, 0x00DC, 7, 0x0000, 0, 0)
MX6_PAD_DECL(DISP0_DAT2__IPU1_DISP0_DATA02, 0x03F4, 0x00E0, 0, 0x0000, 0, 0)
MX6_PAD_DECL(DISP0_DAT2__IPU1_DISP0_DATA02, 0x03F4, 0x00E0, 0, 0x0000, 0, PAD_CTL_DSE_120ohm)
MX6_PAD_DECL(DISP0_DAT2__LCD_DATA02, 0x03F4, 0x00E0, 1, 0x0000, 0, 0)
MX6_PAD_DECL(DISP0_DAT2__ECSPI3_MISO, 0x03F4, 0x00E0, 2, 0x0000, 0, 0)
MX6_PAD_DECL(DISP0_DAT2__GPIO4_IO23, 0x03F4, 0x00E0, 5, 0x0000, 0, 0)
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment