Commit e5a3bc24 authored by Remy Bohmer's avatar Remy Bohmer Committed by Ben Warren

Add config option for disabling DM9000-SROM support.

Some boards do not have SROM support for the DM9000 network adapter.
Instead of listing these board names in the driver code, make this
option configurable from the board config file.

It also removes a build warning for the at91sam9261ek board:
'dm9000x.c:545: warning: 'read_srom_word' defined but not used'

And it repaires the trizepsiv board build which was broken around the
same routines
Signed-off-by: default avatarRemy Bohmer <linux@bohmer.net>
Signed-off-by: default avatarBen Warren <biggerbadderben@gmail.com>
parent 2c0234fa
......@@ -23,17 +23,17 @@
#include <common.h>
#include <command.h>
extern u16 read_srom_word(int);
extern void write_srom_word(int offset, u16 val);
#include <dm9000.h>
static int do_read_dm9000_eeprom ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) {
int i;
unsigned int i;
u8 data[2];
for (i=0; i < 0x40; i++) {
if (!(i % 0x10))
printf("\n%08lx:", i);
printf(" %04x", read_srom_word(i));
printf("\n%08x:", i);
dm9000_read_srom_word(i, data);
printf(" %02x%02x", data[1], data[0]);
}
printf ("\n");
return (0);
......@@ -54,7 +54,7 @@ static int do_write_dm9000_eeprom ( cmd_tbl_t *cmdtp, int flag, int argc, char *
cmd_usage(cmdtp);
return 1;
}
write_srom_word(offset, value);
dm9000_write_srom_word(offset, value);
return (0);
}
......
......@@ -53,7 +53,7 @@ v1.2 03/18/2003 Weilun Huang <weilun_huang@davicom.com.tw>:
notes (i.e. double reset)
- some minor code cleanups
These changes are tested with DM9000{A,EP,E} together
with a 200MHz Atmel AT91SAM92161 core
with a 200MHz Atmel AT91SAM9261 core
TODO: external MII is not functional, only internal at the moment.
*/
......@@ -62,6 +62,7 @@ TODO: external MII is not functional, only internal at the moment.
#include <command.h>
#include <net.h>
#include <asm/io.h>
#include <dm9000.h>
#include "dm9000x.h"
......@@ -113,7 +114,6 @@ void eth_halt(void);
static int dm9000_probe(void);
static u16 phy_read(int);
static void phy_write(int, u16);
static void read_srom_word(int, u8 *);
static u8 DM9000_ior(int);
static void DM9000_iow(int reg, u8 value);
......@@ -347,9 +347,9 @@ eth_init(bd_t * bd)
/* Set Node address */
if (!eth_getenv_enetaddr("ethaddr", enetaddr)) {
#if !defined(CONFIG_AT91SAM9261EK)
#if !defined(CONFIG_DM9000_NO_SROM)
for (i = 0; i < 3; i++)
read_srom_word(i, enetaddr + 2 * i);
dm9000_read_srom_word(i, enetaddr + 2 * i);
eth_setenv_enetaddr("ethaddr", enetaddr);
#endif
}
......@@ -541,7 +541,8 @@ eth_rx(void)
/*
Read a word data from SROM
*/
static void read_srom_word(int offset, u8 *to)
#if !defined(CONFIG_DM9000_NO_SROM)
void dm9000_read_srom_word(int offset, u8 *to)
{
DM9000_iow(DM9000_EPAR, offset);
DM9000_iow(DM9000_EPCR, 0x4);
......@@ -551,8 +552,7 @@ static void read_srom_word(int offset, u8 *to)
to[1] = DM9000_ior(DM9000_EPDRH);
}
void
write_srom_word(int offset, u16 val)
void dm9000_write_srom_word(int offset, u16 val)
{
DM9000_iow(DM9000_EPAR, offset);
DM9000_iow(DM9000_EPDRH, ((val >> 8) & 0xff));
......@@ -561,7 +561,7 @@ write_srom_word(int offset, u16 val)
udelay(8000);
DM9000_iow(DM9000_EPCR, 0);
}
#endif
/*
Read a byte from I/O port
......
......@@ -137,6 +137,7 @@
#define DM9000_IO CONFIG_DM9000_BASE
#define DM9000_DATA (CONFIG_DM9000_BASE + 4)
#define CONFIG_DM9000_USE_16BIT 1
#define CONFIG_DM9000_NO_SROM 1
#define CONFIG_NET_RETRY_COUNT 20
#define CONFIG_RESET_PHY_R 1
......
/*
* NOTE: DAVICOM DM9000 ethernet driver interface
*
* Authors: Remy Bohmer <linux@bohmer.net>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#ifndef __DM9000_H__
#define __DM9000_H__
/****************** function prototypes **********************/
#if !defined(CONFIG_DM9000_NO_SROM)
void dm9000_write_srom_word(int offset, u16 val);
void dm9000_read_srom_word(int offset, u8 *to);
#endif
#endif /* __DM9000_H__ */
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment