Commit e84b8f6c authored by Dan Murphy's avatar Dan Murphy Committed by Tom Rini

ARM: omap4-panda: Add MAC address creation for panda

Add a MAC address create based on the OMAP die ID registers.
Then poplulate the ethaddr enviroment variable so that the device
tree alias can be updated prior to boot.
Signed-off-by: default avatarDan Murphy <dmurphy@ti.com>
parent b0c3b119
......@@ -33,6 +33,10 @@
/* CONTROL_ID_CODE */
#define CONTROL_ID_CODE 0x4A002204
#define STD_FUSE_DIE_ID_0 0x4A002200
#define STD_FUSE_DIE_ID_1 0x4A002208
#define STD_FUSE_DIE_ID_2 0x4A00220c
#define STD_FUSE_DIE_ID_3 0x4A002210
#define OMAP4_CONTROL_ID_CODE_ES1_0 0x0B85202F
#define OMAP4_CONTROL_ID_CODE_ES2_0 0x1B85202F
......
......@@ -133,6 +133,7 @@ int misc_init_r(void)
{
int phy_type;
u32 auxclk, altclksrc;
uint8_t device_mac[6];
/* EHCI is not supported on ES1.0 */
if (omap_revision() == OMAP4430_ES1_0)
......@@ -186,6 +187,21 @@ int misc_init_r(void)
writel(altclksrc, &scrm->altclksrc);
if (!getenv("usbethaddr")) {
/*
* create a fake MAC address from the processor ID code.
* first byte is 0x02 to signify locally administered.
*/
device_mac[0] = 0x02;
device_mac[1] = readl(STD_FUSE_DIE_ID_3) & 0xff;
device_mac[2] = readl(STD_FUSE_DIE_ID_2) & 0xff;
device_mac[3] = readl(STD_FUSE_DIE_ID_1) & 0xff;
device_mac[4] = readl(STD_FUSE_DIE_ID_0) & 0xff;
device_mac[5] = (readl(STD_FUSE_DIE_ID_0) >> 8) & 0xff;
eth_setenv_enetaddr("usbethaddr", device_mac);
}
return 0;
}
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment