Commit ec4c6933 authored by Mike Frysinger's avatar Mike Frysinger

Blackfin: unify bootmode based LDR_FLAGS setup

Unify this convention for all Blackfin boards.
Signed-off-by: 's avatarMike Frysinger <vapier@gentoo.org>
parent fbb21ff0
......@@ -67,6 +67,9 @@ endif
LDR_FLAGS += $(LDR_FLAGS-y)
# Set some default LDR flags based on boot mode.
LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE))
ifeq ($(wildcard $(TOPDIR)/board/$(BOARD)/u-boot.lds*),)
LDSCRIPT = $(obj)arch/$(ARCH)/lib/u-boot.lds.S
endif
......
......@@ -27,6 +27,3 @@ CONFIG_BFIN_CPU = bf536-0.3
CFLAGS_lib += -O2
CFLAGS_lib/lzma += -O2
# Set some default LDR flags based on boot mode.
LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE))
......@@ -27,6 +27,3 @@ CONFIG_BFIN_CPU = bf518-0.0
CFLAGS_lib += -O2
CFLAGS_lib/lzma += -O2
# Set some default LDR flags based on boot mode.
LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE))
......@@ -27,6 +27,3 @@ CONFIG_BFIN_CPU = bf526-0.0
CFLAGS_lib += -O2
CFLAGS_lib/lzma += -O2
# Set some default LDR flags based on boot mode.
LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE))
......@@ -27,6 +27,3 @@ CONFIG_BFIN_CPU = bf527-0.2
CFLAGS_lib += -O2
CFLAGS_lib/lzma += -O2
# Set some default LDR flags based on boot mode.
LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE))
......@@ -27,6 +27,3 @@ CONFIG_BFIN_CPU = bf527-0.0
CFLAGS_lib += -O2
CFLAGS_lib/lzma += -O2
# Set some default LDR flags based on boot mode.
LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE))
......@@ -30,4 +30,3 @@ CFLAGS_lzma += -O2
# Set some default LDR flags based on boot mode.
LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 --dma 6
LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE))
......@@ -30,4 +30,3 @@ CFLAGS_lib/lzma += -O2
# Set some default LDR flags based on boot mode.
LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 --dma 8
LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE))
......@@ -30,4 +30,3 @@ CFLAGS_lib/lzma += -O2
# Set some default LDR flags based on boot mode.
LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 --dma 8
LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE))
......@@ -26,5 +26,4 @@
CONFIG_BFIN_CPU = bf537-0.2
# Set some default LDR flags based on boot mode.
LDR_FLAGS-BFIN_BOOT_UART := --port g --gpio 6
LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE))
LDR_FLAGS-BFIN_BOOT_UART := --port g --gpio 6
......@@ -24,6 +24,3 @@
#
CONFIG_BFIN_CPU = bf537-0.2
# Set some default LDR flags based on boot mode.
LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE))
......@@ -26,5 +26,4 @@
CONFIG_BFIN_CPU = bf537-0.2
# Set some default LDR flags based on boot mode.
LDR_FLAGS-BFIN_BOOT_UART := --port g --gpio 6
LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE))
LDR_FLAGS-BFIN_BOOT_UART := --port g --gpio 6
......@@ -31,4 +31,3 @@ CFLAGS_lib/lzma += -O2
# Set some default LDR flags based on boot mode.
LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 --dma 8
LDR_FLAGS-BFIN_BOOT_UART := --port g --gpio 6
LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE))
......@@ -30,4 +30,3 @@ CFLAGS_lib/lzma += -O2
# Set some default LDR flags based on boot mode.
LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 --dma 8
LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE))
......@@ -34,4 +34,3 @@ LDR_FLAGS-BFIN_BOOT_FIFO := --dma 1
LDR_FLAGS-BFIN_BOOT_SPI_MASTER := --dma 1
LDR_FLAGS-BFIN_BOOT_UART := --dma 1
LDR_FLAGS-BFIN_BOOT_NAND := --dma 6
LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE))
......@@ -30,4 +30,3 @@ CFLAGS_lib/lzma += -O2
# Set some default LDR flags based on boot mode.
LDR_FLAGS-BFIN_BOOT_PARA := --bits 16
LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE))
......@@ -30,4 +30,3 @@ CFLAGS_lib/lzma += -O2
# Set some default LDR flags based on boot mode.
LDR_FLAGS-BFIN_BOOT_PARA := --bits 16
LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE))
......@@ -24,6 +24,3 @@
#
CONFIG_BFIN_CPU = bf532-0.5
# Set some default LDR flags based on boot mode.
LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE))
......@@ -24,6 +24,3 @@
#
CONFIG_BFIN_CPU = bf561-0.5
# Set some default LDR flags based on boot mode.
LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE))
......@@ -27,6 +27,3 @@ CONFIG_BFIN_CPU = bf527-0.0
CFLAGS_lib += -O2
CFLAGS_lib/lzma += -O2
# Set some default LDR flags based on boot mode.
LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE))
......@@ -30,4 +30,3 @@ CFLAGS_lib/lzma += -O2
# Set some default LDR flags based on boot mode.
LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 --dma 8
LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE))
......@@ -30,4 +30,3 @@ CFLAGS_lib/lzma += -O2
# Set some default LDR flags based on boot mode.
LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 --dma 8
LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE))
......@@ -30,4 +30,3 @@ CFLAGS_lib/lzma += -O2
# Set some default LDR flags based on boot mode.
LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 --dma 8
LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE))
......@@ -33,4 +33,3 @@ LDR_FLAGS-BFIN_BOOT_PARA := --dma 6
LDR_FLAGS-BFIN_BOOT_FIFO := --dma 1
LDR_FLAGS-BFIN_BOOT_SPI_MASTER := --dma 1
LDR_FLAGS-BFIN_BOOT_UART := --dma 1
LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE))
......@@ -30,4 +30,3 @@ CFLAGS_lib/lzma += -O2
# Set some default LDR flags based on boot mode.
LDR_FLAGS-BFIN_BOOT_PARA := --bits 16
LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE))
......@@ -27,4 +27,3 @@ CONFIG_BFIN_CPU = bf561-0.5
# Set some default LDR flags based on boot mode.
LDR_FLAGS-BFIN_BOOT_PARA := --bits 16
LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE))
......@@ -31,4 +31,3 @@ CFLAGS_lib/lzma += -O2
# Set some default LDR flags based on boot mode.
LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 --dma 8
LDR_FLAGS-BFIN_BOOT_UART := --port g --gpio 6
LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE))
......@@ -27,6 +27,3 @@ CONFIG_BFIN_CPU = bf518-0.0
CFLAGS_lib += -O2
CFLAGS_lib/lzma += -O2
# Set some default LDR flags based on boot mode.
LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE))
......@@ -30,4 +30,3 @@ CFLAGS_lib/lzma += -O2
# Set some default LDR flags based on boot mode.
LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 --dma 8
LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE))
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment