Commit ed18c191 authored by Kumar Gala's avatar Kumar Gala Committed by Tom Rix

ppc/85xx: Clean up mpc8572DS PCI setup code

Use new fsl_pci_init_port() that reduces amount of duplicated code in the
board ports, use IO accessors and clean up printing of status info.
Signed-off-by: default avatarKumar Gala <galak@kernel.crashing.org>
parent aaf38ec3
......@@ -160,189 +160,105 @@ static struct pci_controller pcie2_hose;
static struct pci_controller pcie3_hose;
#endif
int first_free_busno=0;
#ifdef CONFIG_PCI
void pci_init_board(void)
{
volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
uint devdisr = gur->devdisr;
uint io_sel = (gur->pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19;
uint host_agent = (gur->porbmsr & MPC85xx_PORBMSR_HA) >> 16;
struct fsl_pci_info pci_info[3];
u32 devdisr, pordevsr, io_sel, host_agent, temp32;
int first_free_busno = 0;
int num = 0;
int pcie_ep, pcie_configured;
devdisr = in_be32(&gur->devdisr);
pordevsr = in_be32(&gur->pordevsr);
io_sel = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19;
host_agent = (in_be32(&gur->porbmsr) & MPC85xx_PORBMSR_HA) >> 16;
debug (" pci_init_board: devdisr=%x, io_sel=%x, host_agent=%x\n",
devdisr, io_sel, host_agent);
if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII1_DIS))
if (!(pordevsr & MPC85xx_PORDEVSR_SGMII1_DIS))
printf (" eTSEC1 is in sgmii mode.\n");
if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII2_DIS))
if (!(pordevsr & MPC85xx_PORDEVSR_SGMII2_DIS))
printf (" eTSEC2 is in sgmii mode.\n");
if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII3_DIS))
if (!(pordevsr & MPC85xx_PORDEVSR_SGMII3_DIS))
printf (" eTSEC3 is in sgmii mode.\n");
if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII4_DIS))
if (!(pordevsr & MPC85xx_PORDEVSR_SGMII4_DIS))
printf (" eTSEC4 is in sgmii mode.\n");
puts("\n");
#ifdef CONFIG_PCIE3
{
volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE3_ADDR;
struct pci_controller *hose = &pcie3_hose;
int pcie_ep = is_fsl_pci_agent(LAW_TRGT_IF_PCIE_3, host_agent);
int pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_3, io_sel);
struct pci_region *r = hose->regions;
u32 temp32;
if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE3)){
printf ("\n PCIE3 connected to ULI as %s (base address %x)",
pcie_ep ? "End Point" : "Root Complex",
(uint)pci);
if (pci->pme_msg_det) {
pci->pme_msg_det = 0xffffffff;
debug (" with errors. Clearing. Now 0x%08x",pci->pme_msg_det);
}
printf ("\n");
/* outbound memory */
pci_set_region(r++,
CONFIG_SYS_PCIE3_MEM_BUS,
CONFIG_SYS_PCIE3_MEM_PHYS,
CONFIG_SYS_PCIE3_MEM_SIZE,
PCI_REGION_MEM);
/* outbound io */
pci_set_region(r++,
CONFIG_SYS_PCIE3_IO_BUS,
CONFIG_SYS_PCIE3_IO_PHYS,
CONFIG_SYS_PCIE3_IO_SIZE,
PCI_REGION_IO);
hose->region_count = r - hose->regions;
hose->first_busno=first_free_busno;
fsl_pci_init(hose, (u32)&pci->cfg_addr, (u32)&pci->cfg_data);
first_free_busno=hose->last_busno+1;
printf (" PCIE3 on bus %02x - %02x\n",
hose->first_busno,hose->last_busno);
/*
* Activate ULI1575 legacy chip by performing a fake
* memory access. Needed to make ULI RTC work.
* Device 1d has the first on-board memory BAR.
*/
pci_hose_read_config_dword(hose, PCI_BDF(2, 0x1d, 0 ),
PCI_BASE_ADDRESS_1, &temp32);
if (temp32 >= CONFIG_SYS_PCIE3_MEM_BUS) {
void *p = pci_mem_to_virt(PCI_BDF(2, 0x1d, 0),
temp32, 4, 0);
debug(" uli1572 read to %p\n", p);
in_be32(p);
}
} else {
printf (" PCIE3: disabled\n");
pcie_ep = is_fsl_pci_agent(LAW_TRGT_IF_PCIE_3, host_agent);
pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_3, io_sel);
if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE3)){
SET_STD_PCIE_INFO(pci_info[num], 3);
printf (" PCIE3 connected to ULI as %s (base addr %lx)\n",
pcie_ep ? "End Point" : "Root Complex",
pci_info[num].regs);
first_free_busno = fsl_pci_init_port(&pci_info[num++],
&pcie3_hose, first_free_busno);
/*
* Activate ULI1575 legacy chip by performing a fake
* memory access. Needed to make ULI RTC work.
* Device 1d has the first on-board memory BAR.
*/
pci_hose_read_config_dword(&pcie3_hose, PCI_BDF(2, 0x1d, 0),
PCI_BASE_ADDRESS_1, &temp32);
if (temp32 >= CONFIG_SYS_PCIE3_MEM_BUS) {
void *p = pci_mem_to_virt(PCI_BDF(2, 0x1d, 0),
temp32, 4, 0);
debug(" uli1572 read to %p\n", p);
in_be32(p);
}
} else {
printf (" PCIE3: disabled\n");
}
puts("\n");
#else
gur->devdisr |= MPC85xx_DEVDISR_PCIE3; /* disable */
setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCIE3); /* disable */
#endif
#ifdef CONFIG_PCIE2
{
volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE2_ADDR;
struct pci_controller *hose = &pcie2_hose;
int pcie_ep = is_fsl_pci_agent(LAW_TRGT_IF_PCIE_2, host_agent);
int pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_2, io_sel);
struct pci_region *r = hose->regions;
if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE2)){
printf ("\n PCIE2 connected to Slot 1 as %s (base address %x)",
pcie_ep ? "End Point" : "Root Complex",
(uint)pci);
if (pci->pme_msg_det) {
pci->pme_msg_det = 0xffffffff;
debug (" with errors. Clearing. Now 0x%08x",pci->pme_msg_det);
}
printf ("\n");
/* outbound memory */
pci_set_region(r++,
CONFIG_SYS_PCIE2_MEM_BUS,
CONFIG_SYS_PCIE2_MEM_PHYS,
CONFIG_SYS_PCIE2_MEM_SIZE,
PCI_REGION_MEM);
/* outbound io */
pci_set_region(r++,
CONFIG_SYS_PCIE2_IO_BUS,
CONFIG_SYS_PCIE2_IO_PHYS,
CONFIG_SYS_PCIE2_IO_SIZE,
PCI_REGION_IO);
hose->region_count = r - hose->regions;
hose->first_busno=first_free_busno;
fsl_pci_init(hose, (u32)&pci->cfg_addr, (u32)&pci->cfg_data);
first_free_busno=hose->last_busno+1;
printf (" PCIE2 on bus %02x - %02x\n",
hose->first_busno,hose->last_busno);
} else {
printf (" PCIE2: disabled\n");
}
pcie_ep = is_fsl_pci_agent(LAW_TRGT_IF_PCIE_2, host_agent);
pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_2, io_sel);
if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE2)){
SET_STD_PCIE_INFO(pci_info[num], 2);
printf (" PCIE2 connected to Slot 1 as %s (base addr %lx)\n",
pcie_ep ? "End Point" : "Root Complex",
pci_info[num].regs);
first_free_busno = fsl_pci_init_port(&pci_info[num++],
&pcie2_hose, first_free_busno);
} else {
printf (" PCIE2: disabled\n");
}
puts("\n");
#else
gur->devdisr |= MPC85xx_DEVDISR_PCIE2; /* disable */
setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCIE2); /* disable */
#endif
#ifdef CONFIG_PCIE1
{
volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE1_ADDR;
struct pci_controller *hose = &pcie1_hose;
int pcie_ep = is_fsl_pci_agent(LAW_TRGT_IF_PCIE_1, host_agent);
int pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_1, io_sel);
struct pci_region *r = hose->regions;
if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
printf ("\n PCIE1 connected to Slot 2 as %s (base address %x)",
pcie_ep ? "End Point" : "Root Complex",
(uint)pci);
if (pci->pme_msg_det) {
pci->pme_msg_det = 0xffffffff;
debug (" with errors. Clearing. Now 0x%08x",pci->pme_msg_det);
}
printf ("\n");
/* outbound memory */
pci_set_region(r++,
CONFIG_SYS_PCIE1_MEM_BUS,
CONFIG_SYS_PCIE1_MEM_PHYS,
CONFIG_SYS_PCIE1_MEM_SIZE,
PCI_REGION_MEM);
/* outbound io */
pci_set_region(r++,
CONFIG_SYS_PCIE1_IO_BUS,
CONFIG_SYS_PCIE1_IO_PHYS,
CONFIG_SYS_PCIE1_IO_SIZE,
PCI_REGION_IO);
hose->region_count = r - hose->regions;
hose->first_busno=first_free_busno;
fsl_pci_init(hose, (u32)&pci->cfg_addr, (u32)&pci->cfg_data);
first_free_busno=hose->last_busno+1;
printf(" PCIE1 on bus %02x - %02x\n",
hose->first_busno,hose->last_busno);
} else {
printf (" PCIE1: disabled\n");
}
#ifdef CONFIG_PCIE1
pcie_ep = is_fsl_pci_agent(LAW_TRGT_IF_PCIE_1, host_agent);
pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_1, io_sel);
if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
SET_STD_PCIE_INFO(pci_info[num], 1);
printf (" PCIE1 connected to Slot 2 as %s (base addr %lx)\n",
pcie_ep ? "End Point" : "Root Complex",
pci_info[num].regs);
first_free_busno = fsl_pci_init_port(&pci_info[num++],
&pcie1_hose, first_free_busno);
} else {
printf (" PCIE1: disabled\n");
}
puts("\n");
#else
gur->devdisr |= MPC85xx_DEVDISR_PCIE; /* disable */
setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCIE); /* disable */
#endif
}
#endif
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment