Commit f0eade5f authored by York Sun's avatar York Sun Committed by Jason Liu

spl: fit: Add booting OS first

If CONFIG_SPL_OS_BOOT is enabled, boot OS if kernel image is found
in FIT structure.
Signed-off-by: 's avatarYork Sun <york.sun@nxp.com>
Reviewed-by: 's avatarTom Rini <trini@konsulko.com>
Reviewed-by: 's avatarSimon Glass <sjg@chromium.org>
(cherry picked from commit c8bc3c0c9ff7ce649b2af1416919b50ecf504874)
parent 6cde0570
......@@ -222,13 +222,16 @@ int spl_load_simple_fit(struct spl_image_info *spl_image,
ulong size;
unsigned long count;
struct spl_image_info image_info;
int node, images, ret;
bool boot_os = false;
int node = -1;
int images, ret;
int base_offset, align_len = ARCH_DMA_MINALIGN - 1;
int index = 0;
/*
* Figure out where the external images start. This is the base for the
* data-offset properties in each image.
* For FIT with external data, figure out where the external images
* start. This is the base for the data-offset properties in each
* image.
*/
size = fdt_totalsize(fit);
size = (size + 3) & ~3;
......@@ -247,6 +250,9 @@ int spl_load_simple_fit(struct spl_image_info *spl_image,
*
* In fact the FIT has its own load address, but we assume it cannot
* be before CONFIG_SYS_TEXT_BASE.
*
* For FIT with data embedded, data is loaded as part of FIT image.
* For FIT with external data, data is not loaded in this step.
*/
fit = (void *)((CONFIG_SYS_TEXT_BASE - size - info->bl_len -
align_len) & ~align_len);
......@@ -264,8 +270,17 @@ int spl_load_simple_fit(struct spl_image_info *spl_image,
return -1;
}
#ifdef CONFIG_SPL_OS_BOOT
/* Find OS image first */
node = spl_fit_get_image_node(fit, images, FIT_KERNEL_PROP, 0);
if (node < 0)
debug("No kernel image.\n");
else
boot_os = true;
#endif
/* find the U-Boot image */
node = spl_fit_get_image_node(fit, images, "firmware", 0);
if (node < 0)
node = spl_fit_get_image_node(fit, images, "firmware", 0);
if (node < 0) {
debug("could not find firmware image, trying loadables...\n");
node = spl_fit_get_image_node(fit, images, "loadables", 0);
......@@ -287,24 +302,31 @@ int spl_load_simple_fit(struct spl_image_info *spl_image,
if (ret)
return ret;
#ifdef CONFIG_SPL_OS_BOOT
if (!fit_image_get_os(fit, node, &spl_image->os))
debug("Image OS is %s\n", genimg_get_os_name(spl_image->os));
#else
spl_image->os = IH_OS_U_BOOT;
#endif
/* Figure out which device tree the board wants to use */
node = spl_fit_get_image_node(fit, images, FIT_FDT_PROP, 0);
if (node < 0) {
debug("%s: cannot find FDT node\n", __func__);
return node;
}
if (!boot_os) {
/* Figure out which device tree the board wants to use */
node = spl_fit_get_image_node(fit, images, FIT_FDT_PROP, 0);
if (node < 0) {
debug("%s: cannot find FDT node\n", __func__);
return node;
}
/*
* Read the device tree and place it after the image.
* Align the destination address to ARCH_DMA_MINALIGN.
*/
image_info.load_addr = spl_image->load_addr + spl_image->size;
ret = spl_load_fit_image(info, sector, fit, base_offset, node,
&image_info);
if (ret < 0)
return ret;
/*
* Read the device tree and place it after the image.
* Align the destination address to ARCH_DMA_MINALIGN.
*/
image_info.load_addr = spl_image->load_addr + spl_image->size;
ret = spl_load_fit_image(info, sector, fit, base_offset, node,
&image_info);
if (ret < 0)
return ret;
}
/* Now check if there are more images for us to load */
for (; ; index++) {
......
......@@ -4,6 +4,13 @@
* (Bogus) example FIT image description file demonstrating the usage
* of multiple images loaded by the SPL.
* Several binaries will be loaded at their respective load addresses.
*
* For booting U-Boot, "firmware" is searched first. If not found, "loadables"
* is used to identify images to be loaded into memory. If falcon boot is
* enabled, "kernel" is searched first. If not found, it falls back to the
* same flow as booting U-Boot. Changing image type will result skipping
* specific image.
*
* Finally the one image specifying an entry point will be entered by the SPL.
*/
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment