Commit f4fb5ef0 authored by Fabio Estevam's avatar Fabio Estevam Committed by Stefano Babic

mx6dlsabresd: Use its own DCD table

Currently mx6dlsabresd shares the same DCD settings with the nitrogen board.

Provide a DCD configuration file specific to mx6dlsabresd with the settings
recommended by the Freescale hardware team.
Signed-off-by: 's avatarFabio Estevam <fabio.estevam@freescale.com>
parent 89e69fd4
/*
* Copyright (C) 2014 Freescale Semiconductor, Inc.
*
* SPDX-License-Identifier: GPL-2.0+
*
* Refer docs/README.imxmage for more details about how-to configure
* and create imximage boot image
*
* The syntax is taken as close as possible with the kwbimage
*/
/* image version */
IMAGE_VERSION 2
/*
* Boot Device : one of
* spi, sd (the board has no nand neither onenand)
*/
BOOT_FROM sd
/*
* Device Configuration Data (DCD)
*
* Each entry must have the format:
* Addr-type Address Value
*
* where:
* Addr-type register length (1,2 or 4 bytes)
* Address absolute address of the register
* value value to be stored in the register
*/
DATA 4 0x020e0774 0x000C0000
DATA 4 0x020e0754 0x00000000
DATA 4 0x020e04ac 0x00000030
DATA 4 0x020e04b0 0x00000030
DATA 4 0x020e0464 0x00000030
DATA 4 0x020e0490 0x00000030
DATA 4 0x020e074c 0x00000030
DATA 4 0x020e0494 0x00000030
DATA 4 0x020e04a0 0x00000000
DATA 4 0x020e04b4 0x00000030
DATA 4 0x020e04b8 0x00000030
DATA 4 0x020e076c 0x00000030
DATA 4 0x020e0750 0x00020000
DATA 4 0x020e04bc 0x00000030
DATA 4 0x020e04c0 0x00000030
DATA 4 0x020e04c4 0x00000030
DATA 4 0x020e04c8 0x00000030
DATA 4 0x020e04cc 0x00000030
DATA 4 0x020e04d0 0x00000030
DATA 4 0x020e04d4 0x00000030
DATA 4 0x020e04d8 0x00000030
DATA 4 0x020e0760 0x00020000
DATA 4 0x020e0764 0x00000030
DATA 4 0x020e0770 0x00000030
DATA 4 0x020e0778 0x00000030
DATA 4 0x020e077c 0x00000030
DATA 4 0x020e0780 0x00000030
DATA 4 0x020e0784 0x00000030
DATA 4 0x020e078c 0x00000030
DATA 4 0x020e0748 0x00000030
DATA 4 0x020e0470 0x00000030
DATA 4 0x020e0474 0x00000030
DATA 4 0x020e0478 0x00000030
DATA 4 0x020e047c 0x00000030
DATA 4 0x020e0480 0x00000030
DATA 4 0x020e0484 0x00000030
DATA 4 0x020e0488 0x00000030
DATA 4 0x020e048c 0x00000030
DATA 4 0x021b0800 0xa1390003
DATA 4 0x021b080c 0x001F001F
DATA 4 0x021b0810 0x001F001F
DATA 4 0x021b480c 0x001F001F
DATA 4 0x021b4810 0x001F001F
DATA 4 0x021b083c 0x4220021F
DATA 4 0x021b0840 0x0207017E
DATA 4 0x021b483c 0x4201020C
DATA 4 0x021b4840 0x01660172
DATA 4 0x021b0848 0x4A4D4E4D
DATA 4 0x021b4848 0x4A4F5049
DATA 4 0x021b0850 0x3F3C3D31
DATA 4 0x021b4850 0x3238372B
DATA 4 0x021b081c 0x33333333
DATA 4 0x021b0820 0x33333333
DATA 4 0x021b0824 0x33333333
DATA 4 0x021b0828 0x33333333
DATA 4 0x021b481c 0x33333333
DATA 4 0x021b4820 0x33333333
DATA 4 0x021b4824 0x33333333
DATA 4 0x021b4828 0x33333333
DATA 4 0x021b08b8 0x00000800
DATA 4 0x021b48b8 0x00000800
DATA 4 0x021b0004 0x0002002D
DATA 4 0x021b0008 0x00333030
DATA 4 0x021b000c 0x3F435313
DATA 4 0x021b0010 0xB66E8B63
DATA 4 0x021b0014 0x01FF00DB
DATA 4 0x021b0018 0x00001740
DATA 4 0x021b001c 0x00008000
DATA 4 0x021b002c 0x000026d2
DATA 4 0x021b0030 0x00431023
DATA 4 0x021b0040 0x00000027
DATA 4 0x021b0000 0x831A0000
DATA 4 0x021b001c 0x04008032
DATA 4 0x021b001c 0x00008033
DATA 4 0x021b001c 0x00048031
DATA 4 0x021b001c 0x05208030
DATA 4 0x021b001c 0x04008040
DATA 4 0x021b0020 0x00005800
DATA 4 0x021b0818 0x00011117
DATA 4 0x021b4818 0x00011117
DATA 4 0x021b0004 0x0002556D
DATA 4 0x021b0404 0x00011006
DATA 4 0x021b001c 0x00000000
/* set the default clock gate to save power */
DATA 4 0x020c4068 0x00C03F3F
DATA 4 0x020c406c 0x0030FC03
DATA 4 0x020c4070 0x0FFFC000
DATA 4 0x020c4074 0x3FF00000
DATA 4 0x020c4078 0x00FFF300
DATA 4 0x020c407c 0x0F0000C3
DATA 4 0x020c4080 0x000003FF
/* enable AXI cache for VDOA/VPU/IPU */
DATA 4 0x020e0010 0xF00000CF
/* set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 */
DATA 4 0x020e0018 0x007F007F
DATA 4 0x020e001c 0x007F007F
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6dl.cfg,MX6DL"
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6sabresd/mx6dlsabresd.cfg,MX6DL"
CONFIG_ARM=y
CONFIG_TARGET_MX6SABRESD=y
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment