Commit f978f7c2 authored by Aneesh Bansal's avatar Aneesh Bansal Committed by York Sun

powerpc/mpc85xx: SECURE BOOT- Add secure boot target for BSC9132QDS

Add NOR, SPI and SD secure boot targets for BSC9132QDS.

Changes:
- Debug TLB entry is not required for Secure Boot Target.
Signed-off-by: default avatarAneesh Bansal <aneesh.bansal@freescale.com>
Reviewed-by: default avatarYork Sun <yorksun@freescale.com>
parent 7efb4b51
......@@ -467,7 +467,8 @@ nexti: mflr r1 /* R1 = our PC */
2: cmpw r3, r4
blt 1b
#if defined(CONFIG_SYS_PPC_E500_DEBUG_TLB) && !defined(MINIMAL_SPL)
#if defined(CONFIG_SYS_PPC_E500_DEBUG_TLB) && !defined(MINIMAL_SPL) && \
!defined(CONFIG_SECURE_BOOT)
/*
* TLB entry for debuggging in AS1
* Create temporary TLB entry in AS0 to handle debug exception
......@@ -488,12 +489,6 @@ nexti: mflr r1 /* R1 = our PC */
0xffc00000, MAS3_SX|MAS3_SW|MAS3_SR, \
0, r6
#elif !defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SECURE_BOOT)
create_tlb1_entry CONFIG_SYS_PPC_E500_DEBUG_TLB, \
0, BOOKE_PAGESZ_1M, \
CONFIG_SYS_MONITOR_BASE, MAS2_I|MAS2_G, \
CONFIG_SYS_PBI_FLASH_WINDOW, MAS3_SX|MAS3_SW|MAS3_SR, \
0, r6
#else
/*
* TLB entry is created for IVPR + IVOR15 to map on valid OP code address
......
......@@ -10,6 +10,8 @@
#ifdef CONFIG_SECURE_BOOT
#if defined(CONFIG_FSL_CORENET)
#define CONFIG_SYS_PBI_FLASH_BASE 0xc0000000
#elif defined(CONFIG_BSC9132QDS)
#define CONFIG_SYS_PBI_FLASH_BASE 0xc8000000
#else
#define CONFIG_SYS_PBI_FLASH_BASE 0xce000000
#endif
......
......@@ -759,6 +759,12 @@ Active powerpc mpc85xx - freescale bsc9132qds
Active powerpc mpc85xx - freescale bsc9132qds BSC9132QDS_SDCARD_DDRCLK133 BSC9132QDS:BSC9132QDS,SDCARD,SYS_CLK_100_DDR_133 Naveen Burmi <NaveenBurmi@freescale.com>
Active powerpc mpc85xx - freescale bsc9132qds BSC9132QDS_SPIFLASH_DDRCLK100 BSC9132QDS:BSC9132QDS,SPIFLASH,SYS_CLK_100_DDR_100 Naveen Burmi <NaveenBurmi@freescale.com>
Active powerpc mpc85xx - freescale bsc9132qds BSC9132QDS_SPIFLASH_DDRCLK133 BSC9132QDS:BSC9132QDS,SPIFLASH,SYS_CLK_100_DDR_133 Naveen Burmi <NaveenBurmi@freescale.com>
Active powerpc mpc85xx - freescale bsc9132qds BSC9132QDS_NOR_DDRCLK100_SECURE BSC9132QDS:BSC9132QDS,SYS_CLK_100_DDR_100,SECURE_BOOT Aneesh Bansal <aneesh.bansal@freescale.com>
Active powerpc mpc85xx - freescale bsc9132qds BSC9132QDS_NOR_DDRCLK133_SECURE BSC9132QDS:BSC9132QDS,SYS_CLK_100_DDR_133,SECURE_BOOT Aneesh Bansal <aneesh.bansal@freescale.com>
Active powerpc mpc85xx - freescale bsc9132qds BSC9132QDS_SDCARD_DDRCLK100_SECURE BSC9132QDS:BSC9132QDS,SDCARD,SYS_CLK_100_DDR_100,SECURE_BOOT Aneesh Bansal <aneesh.bansal@freescale.com>
Active powerpc mpc85xx - freescale bsc9132qds BSC9132QDS_SDCARD_DDRCLK133_SECURE BSC9132QDS:BSC9132QDS,SDCARD,SYS_CLK_100_DDR_133,SECURE_BOOT Aneesh Bansal <aneesh.bansal@freescale.com>
Active powerpc mpc85xx - freescale bsc9132qds BSC9132QDS_SPIFLASH_DDRCLK100_SECURE BSC9132QDS:BSC9132QDS,SPIFLASH,SYS_CLK_100_DDR_100,SECURE_BOOT Aneesh Bansal <aneesh.bansal@freescale.com>
Active powerpc mpc85xx - freescale bsc9132qds BSC9132QDS_SPIFLASH_DDRCLK133_SECURE BSC9132QDS:BSC9132QDS,SPIFLASH,SYS_CLK_100_DDR_133,SECURE_BOOT Aneesh Bansal <aneesh.bansal@freescale.com>
Active powerpc mpc85xx - freescale c29xpcie C29XPCIE C29XPCIE:C29XPCIE,36BIT Po Liu <po.liu@freescale.com>
Active powerpc mpc85xx - freescale c29xpcie C29XPCIE_NAND C29XPCIE:C29XPCIE,36BIT,NAND Po Liu <po.liu@freescale.com>
Active powerpc mpc85xx - freescale c29xpcie C29XPCIE_SPIFLASH C29XPCIE:C29XPCIE,36BIT,SPIFLASH Po Liu <po.liu@freescale.com>
......
......@@ -696,4 +696,6 @@ combinations. this should be removed later
#define CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND
#include <asm/fsl_secure_boot.h>
#endif /* __CONFIG_H */
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment