Commit fc04b923 authored by Ryan Harkin's avatar Ryan Harkin Committed by Tom Rini

vexpress64: fvp dram: add DRAM configuration

Create an additional FVP configuration to boot images pre-loaded into
DRAM.

Sometimes it's preferential to boot the model by loading the files
directly into DRAM via model parameters, rather than using
SemiHosting.

An example of model parmaters that are used to pre-load the files
into DRAM:
    --data cluster0.cpu0=Image@0x80080000 \
    --data cluster0.cpu0=fvp-base-gicv2-psci.dtb@0x83000000 \
    --data cluster0.cpu0=uInitrd@0x84000000
Signed-off-by: default avatarRyan Harkin <ryan.harkin@linaro.org>
Reviewed-by: default avatarLinus Walleij <linus.walleij@linaro.org>
[trini: Update board/armltd/vexpress64/Kconfig logic]
Signed-off-by: default avatarTom Rini <trini@konsulko.com>
parent 0d3012af
......@@ -567,6 +567,15 @@ config TARGET_VEXPRESS64_BASE_FVP
select ARM64
select SEMIHOSTING
config TARGET_VEXPRESS64_BASE_FVP_DRAM
bool "Support Versatile Express ARMv8a FVP BASE model booting from DRAM"
select ARM64
help
This target is derived from TARGET_VEXPRESS64_BASE_FVP and over-rides
the default config to allow the user to load the images directly into
DRAM using model parameters rather than by using semi-hosting to load
the files from the host filesystem.
config TARGET_VEXPRESS64_JUNO
bool "Support Versatile Express Juno Development Platform"
select ARM64
......
if TARGET_VEXPRESS64_BASE_FVP || TARGET_VEXPRESS64_JUNO
if TARGET_VEXPRESS64_BASE_FVP || TARGET_VEXPRESS64_JUNO || TARGET_VEXPRESS64_BASE_FVP_DRAM
config SYS_BOARD
default "vexpress64"
......
......@@ -10,6 +10,11 @@ M: Linus Walleij <linus.walleij@linaro.org>
S: Maintained
F: configs/vexpress_aemv8a_semi_defconfig
VEXPRESS_AEMV8A_DRAM BOARD
M: Ryan Harkin <ryan.harkin@linaro.org>
S: Maintained
F: configs/vexpress_aemv8a_dram_defconfig
JUNO DEVELOPMENT PLATFORM BOARD
M: Linus Walleij <linus.walleij@linaro.org>
S: Maintained
......
CONFIG_ARM=y
CONFIG_TARGET_VEXPRESS64_BASE_FVP_DRAM=y
CONFIG_SYS_MALLOC_F_LEN=0x2000
CONFIG_DEFAULT_DEVICE_TREE="vexpress64"
# CONFIG_CMD_CONSOLE is not set
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_XIMG is not set
# CONFIG_CMD_EDITENV is not set
# CONFIG_CMD_ENV_EXISTS is not set
# CONFIG_CMD_LOADS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
# CONFIG_CMD_ITEST is not set
# CONFIG_CMD_SETEXPR is not set
# CONFIG_CMD_NFS is not set
# CONFIG_CMD_MISC is not set
CONFIG_DM=y
CONFIG_DM_SERIAL=y
CONFIG_SYS_PROMPT="VExpress64# "
......@@ -30,7 +30,8 @@
#define CONFIG_BOOTP_VCI_STRING "U-boot.armv8.vexpress_aemv8a"
/* Link Definitions */
#ifdef CONFIG_TARGET_VEXPRESS64_BASE_FVP
#if defined(CONFIG_TARGET_VEXPRESS64_BASE_FVP) || \
defined(CONFIG_TARGET_VEXPRESS64_BASE_FVP_DRAM)
/* ATF loads u-boot here for BASE_FVP model */
#define CONFIG_SYS_TEXT_BASE 0x88000000
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x03f00000)
......@@ -103,7 +104,8 @@
#define GICR_BASE (0x2f100000)
#else
#ifdef CONFIG_TARGET_VEXPRESS64_BASE_FVP
#if defined(CONFIG_TARGET_VEXPRESS64_BASE_FVP) || \
defined(CONFIG_TARGET_VEXPRESS64_BASE_FVP_DRAM)
#define GICD_BASE (0x2f000000)
#define GICC_BASE (0x2c000000)
#elif CONFIG_TARGET_VEXPRESS64_JUNO
......@@ -233,6 +235,25 @@
#define CONFIG_BOOTDELAY 1
#elif CONFIG_TARGET_VEXPRESS64_BASE_FVP_DRAM
#define CONFIG_EXTRA_ENV_SETTINGS \
"kernel_addr=0x80080000\0" \
"initrd_addr=0x84000000\0" \
"fdt_addr=0x83000000\0" \
"fdt_high=0xffffffffffffffff\0" \
"initrd_high=0xffffffffffffffff\0"
#define CONFIG_BOOTARGS "console=ttyAMA0 earlyprintk=pl011,"\
"0x1c090000 debug user_debug=31 "\
"androidboot.hardware=fvpbase "\
"root=/dev/vda2 rw "\
"rootwait "\
"loglevel=9"
#define CONFIG_BOOTCOMMAND "booti $kernel_addr $initrd_addr $fdt_addr"
#define CONFIG_BOOTDELAY 1
#else
#error "Unknown board variant"
#endif
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment