Commit ffee1dde authored by Zhao Qiang's avatar Zhao Qiang Committed by York Sun

SGMII:fix PHY addresses for QSGMII Riser Card working in SGMII mode

Fix PHY addresses for QSGMII Riser Card working in
SGMII mode on board P3041/P5020/P4080/P5040/B4860.

QSGMII Riser Card can work in SGMII mode, but
having the different PHY addresses.
So the following steps should be done:
	1. Confirm whether QSGMII Riser Card is used.
	2. If yes, set the proper PHY address.
Generally, the function is_qsgmii_riser_card() is
for step 1, and set_sgmii_phy() for step 2.

However, there are still some special situations,
take P5040 and B4860 as examples, the PHY addresses
need to be changed when serdes protocol is changed,
so it is necessary to confirm the protocol before
setting PHY addresses.
Signed-off-by: default avatarZhao Qiang <B45475@freescale.com>
parent d5689824
......@@ -21,4 +21,9 @@
#define QIXIS_SRDS1CLK_122 0x5a
#define QIXIS_SRDS1CLK_125 0x5e
/* SGMII */
#define PHY_BASE_ADDR 0x18
#define PORT_NUM 0x04
#define REGNUM 0x00
#endif
......@@ -150,6 +150,8 @@ int board_eth_init(bd_t *bis)
struct memac_mdio_info tg_memac_mdio_info;
unsigned int i;
unsigned int serdes1_prtcl, serdes2_prtcl;
int qsgmii;
struct mii_dev *bus;
ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
serdes1_prtcl = in_be32(&gur->rcwsr[4]) &
FSL_CORENET2_RCWSR4_SRDS1_PRTCL;
......@@ -281,6 +283,22 @@ int board_eth_init(bd_t *bis)
break;
}
/*set PHY address for QSGMII Riser Card on slot2*/
bus = miiphy_get_dev_by_name(DEFAULT_FM_MDIO_NAME);
qsgmii = is_qsgmii_riser_card(bus, PHY_BASE_ADDR, PORT_NUM, REGNUM);
if (qsgmii) {
switch (serdes2_prtcl) {
case 0xb2:
case 0x8d:
fm_info_set_phy_address(FM1_DTSEC3, PHY_BASE_ADDR);
fm_info_set_phy_address(FM1_DTSEC4, PHY_BASE_ADDR + 1);
break;
default:
break;
}
}
for (i = FM1_DTSEC1; i < FM1_DTSEC1 + CONFIG_SYS_NUM_FM1_DTSEC; i++) {
int idx = i - FM1_DTSEC1;
......
......@@ -76,6 +76,8 @@
#define BRDCFG2_REG_GPIO_SEL 0x20
#define PHY_BASE_ADDR 0x00
/*
* BRDCFG1 mask and value for each MAC
*
......@@ -365,6 +367,7 @@ int board_eth_init(bd_t *bis)
struct tgec_mdio_info tgec_mdio_info;
unsigned int i, slot;
int lane;
struct mii_dev *bus;
printf("Initializing Fman\n");
......@@ -470,6 +473,9 @@ int board_eth_init(bd_t *bis)
}
}
bus = miiphy_get_dev_by_name("HYDRA_SGMII_MDIO");
set_sgmii_phy(bus, FM1_DTSEC1, CONFIG_SYS_NUM_FM1_DTSEC, PHY_BASE_ADDR);
/*
* For 10G, we only support one XAUI card per Fman. If present, then we
* force its routing and never touch those bits again, which removes the
......
......@@ -37,6 +37,9 @@
#define EMI1_MASK 0xc0000000
#define EMI2_MASK 0x30000000
#define PHY_BASE_ADDR 0x00
#define PHY_BASE_ADDR_SLOT5 0x10
static int mdio_mux[NUM_FM_PORTS];
static char *mdio_names[16] = {
......@@ -290,6 +293,7 @@ int board_eth_init(bd_t *bis)
int i;
struct fsl_pq_mdio_info dtsec_mdio_info;
struct tgec_mdio_info tgec_mdio_info;
struct mii_dev *bus;
/* Initialize the mdio_mux array so we can recognize empty elements */
for (i = 0; i < NUM_FM_PORTS; i++)
......@@ -370,6 +374,9 @@ int board_eth_init(bd_t *bis)
break;
}
}
bus = mii_dev_for_muxval(EMI1_SLOT5);
set_sgmii_phy(bus, FM1_DTSEC1,
CONFIG_SYS_NUM_FM1_DTSEC, PHY_BASE_ADDR_SLOT5);
for (i = FM1_10GEC1; i < FM1_10GEC1 + CONFIG_SYS_NUM_FM1_10GEC; i++) {
int idx = i - FM1_10GEC1, lane, slot;
......@@ -435,6 +442,11 @@ int board_eth_init(bd_t *bis)
}
}
bus = mii_dev_for_muxval(EMI1_SLOT3);
set_sgmii_phy(bus, FM2_DTSEC1, CONFIG_SYS_NUM_FM2_DTSEC, PHY_BASE_ADDR);
bus = mii_dev_for_muxval(EMI1_SLOT4);
set_sgmii_phy(bus, FM2_DTSEC1, CONFIG_SYS_NUM_FM2_DTSEC, PHY_BASE_ADDR);
for (i = FM2_10GEC1; i < FM2_10GEC1 + CONFIG_SYS_NUM_FM2_10GEC; i++) {
int idx = i - FM2_10GEC1, lane, slot;
switch (fm_info_get_enet_if(i)) {
......
......@@ -77,6 +77,12 @@
#define BRDCFG2_REG_GPIO_SEL 0x20
/* SGMII */
#define PHY_BASE_ADDR 0x00
#define REGNUM 0x00
#define PORT_NUM_FM1 0x04
#define PORT_NUM_FM2 0x02
/*
* BRDCFG1 mask and value for each MAC
*
......@@ -415,6 +421,9 @@ int board_eth_init(bd_t *bis)
struct tgec_mdio_info tgec_mdio_info;
unsigned int i, slot;
int lane;
struct mii_dev *bus;
int qsgmii;
int phy_real_addr;
ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
int srds_prtcl = (in_be32(&gur->rcwsr[4]) &
FSL_CORENET_RCWSR4_SRDS_PRTCL) >> 26;
......@@ -575,6 +584,42 @@ int board_eth_init(bd_t *bis)
}
}
bus = miiphy_get_dev_by_name("SUPER_HYDRA_FM1_SGMII_MDIO");
qsgmii = is_qsgmii_riser_card(bus, PHY_BASE_ADDR, PORT_NUM_FM1, REGNUM);
if (qsgmii) {
for (i = FM1_DTSEC1; i < FM1_DTSEC1 + PORT_NUM_FM1; i++) {
if (fm_info_get_enet_if(i) ==
PHY_INTERFACE_MODE_SGMII) {
phy_real_addr = PHY_BASE_ADDR + i - FM1_DTSEC1;
fm_info_set_phy_address(i, phy_real_addr);
}
}
switch (srds_prtcl) {
case 0x00:
case 0x03:
case 0x04:
case 0x06:
case 0x11:
case 0x2a:
case 0x34:
case 0x36:
fm_info_set_phy_address(FM1_DTSEC3, PHY_BASE_ADDR + 2);
fm_info_set_phy_address(FM1_DTSEC4, PHY_BASE_ADDR + 3);
break;
case 0x01:
case 0x02:
case 0x05:
case 0x07:
case 0x35:
fm_info_set_phy_address(FM1_DTSEC3, PHY_BASE_ADDR + 0);
fm_info_set_phy_address(FM1_DTSEC4, PHY_BASE_ADDR + 1);
break;
default:
break;
}
}
/*
* For 10G, we only support one XAUI card per Fman. If present, then we
* force its routing and never touch those bits again, which removes the
......@@ -686,6 +731,11 @@ int board_eth_init(bd_t *bis)
}
}
bus = miiphy_get_dev_by_name("SUPER_HYDRA_FM2_SGMII_MDIO");
set_sgmii_phy(bus, FM2_DTSEC3, PORT_NUM_FM2, PHY_BASE_ADDR);
bus = miiphy_get_dev_by_name("SUPER_HYDRA_FM3_SGMII_MDIO");
set_sgmii_phy(bus, FM2_DTSEC1, PORT_NUM_FM2, PHY_BASE_ADDR);
/*
* For 10G, we only support one XAUI card per Fman. If present, then we
* force its routing and never touch those bits again, which removes the
......
......@@ -21,6 +21,7 @@
#define TX_PORT_1G_BASE 0x28
#define MAX_NUM_TX_PORT_1G CONFIG_SYS_NUM_FM1_DTSEC
#define TX_PORT_10G_BASE 0x30
#define MIIM_TIMEOUT 0xFFFF
struct fm_muram {
u32 base;
......
......@@ -274,3 +274,47 @@ void fdt_fixup_fman_ethernet(void *blob)
}
#endif
}
/*QSGMII Riser Card can work in SGMII mode, but the PHY address is different.
*This function scans which Riser Card being used(QSGMII or SGMII Riser Card),
*then set the correct PHY address
*/
void set_sgmii_phy(struct mii_dev *bus, enum fm_port base_port,
unsigned int port_num, int phy_base_addr)
{
unsigned int regnum = 0;
int qsgmii;
int i;
int phy_real_addr;
qsgmii = is_qsgmii_riser_card(bus, phy_base_addr, port_num, regnum);
if (!qsgmii)
return;
for (i = base_port; i < base_port + port_num; i++) {
if (fm_info_get_enet_if(i) == PHY_INTERFACE_MODE_SGMII) {
phy_real_addr = phy_base_addr + i - base_port;
fm_info_set_phy_address(i, phy_real_addr);
}
}
}
/*to check whether qsgmii riser card is used*/
int is_qsgmii_riser_card(struct mii_dev *bus, int phy_base_addr,
unsigned int port_num, unsigned regnum)
{
int i;
int val;
if (!bus)
return 0;
for (i = phy_base_addr; i < phy_base_addr + port_num; i++) {
val = bus->read(bus, i, MDIO_DEVAD_NONE, regnum);
if (val != MIIM_TIMEOUT)
return 1;
}
return 0;
}
......@@ -149,5 +149,9 @@ void fm_info_set_phy_address(enum fm_port port, int address);
int fm_info_get_phy_address(enum fm_port port);
void fm_info_set_mdio(enum fm_port port, struct mii_dev *bus);
void fm_disable_port(enum fm_port port);
void set_sgmii_phy(struct mii_dev *bus, enum fm_port base_port,
unsigned int port_num, int phy_base_addr);
int is_qsgmii_riser_card(struct mii_dev *bus, int phy_base_addr,
unsigned int port_num, unsigned regnum);
#endif
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment