1. 05 Dec, 2014 1 commit
  2. 29 Oct, 2014 1 commit
    • Georges Savoundararadj's avatar
      kconfig: arm: introduce symbol for ARM CPUs · 2e07c249
      Georges Savoundararadj authored
      This commit introduces a Kconfig symbol for each ARM CPU:
      CPU_ARM1176, CPU_V7, CPU_PXA, CPU_SA1100.
      Also, it adds the CPU feature Kconfig symbol HAS_VBAR which is selected
      for CPU_ARM1176 and CPU_V7.
      For each target, the corresponding CPU is selected and the definition of
      SYS_CPU in the corresponding Kconfig file is removed.
      Also, it removes redundant "string" type in some Kconfig files.
      Signed-off-by: default avatarGeorges Savoundararadj <savoundg@gmail.com>
      Acked-by: default avatarAlbert ARIBAUD <albert.u.boot@aribaud.net>
      Cc: Masahiro Yamada <yamada.m@jp.panasonic.com>
  3. 13 Sep, 2014 1 commit
  4. 30 Jul, 2014 2 commits
    • Masahiro Yamada's avatar
      Add board MAINTAINERS files · 93d4334f
      Masahiro Yamada authored
      We have switched to Kconfig and the boards.cfg file is going to
      be removed. We have to retrieve the board status and maintainers
      information from it.
      The MAINTAINERS format as in Linux Kernel would be nice
      because we can crib the scripts/get_maintainer.pl script.
      After some discussion, we chose to put a MAINTAINERS file under each
      board directory, not the top-level one because we want to collect
      relevant information for a board into a single place.
      Modify get_maintainer.pl to scan multiple MAINTAINERS files.
      Signed-off-by: default avatarMasahiro Yamada <yamada.m@jp.panasonic.com>
      Suggested-by: default avatarTom Rini <trini@ti.com>
      Acked-by: default avatarSimon Glass <sjg@chromium.org>
    • Masahiro Yamada's avatar
      kconfig: add board Kconfig and defconfig files · dd84058d
      Masahiro Yamada authored
      This commit adds:
       - arch/${ARCH}/Kconfig
          provide a menu to select target boards
       - board/${VENDOR}/${BOARD}/Kconfig or board/${BOARD}/Kconfig
          set CONFIG macros to the appropriate values for each board
       - configs/${TARGET_BOARD}_defconfig
          default setting of each board
      (This commit was automatically generated by a conversion script
      based on boards.cfg)
      In Linux Kernel, defconfig files are located under
      arch/${ARCH}/configs/ directory.
      It works in Linux Kernel since ARCH is always given from the
      command line for cross compile.
      But in U-Boot, ARCH is not given from the command line.
      Which means we cannot know ARCH until the board configuration is done.
      That is why all the "*_defconfig" files should be gathered into a
      single directory ./configs/.
      Signed-off-by: default avatarMasahiro Yamada <yamada.m@jp.panasonic.com>
      Acked-by: default avatarSimon Glass <sjg@chromium.org>
  5. 13 May, 2014 1 commit
  6. 04 Mar, 2014 1 commit
  7. 19 Dec, 2013 1 commit
  8. 04 Dec, 2013 1 commit
  9. 17 Nov, 2013 1 commit
  10. 12 Nov, 2013 1 commit
    • Samuel Egli's avatar
      arm, am335x: update for the siemens boards · 56eb3da4
      Samuel Egli authored
      - dxr2: define unused pins as input
      - do not enable RTC32K OSC on dxr2 board
      - update default environment
        - add splashpos=m,m to default environment, so splash screen is always
        - adapt environment for bootcount feature
        - add altbootcmd to default environment
      - rut: SPL add early reset pulse for eth-phy, maXTouch and display
      - rut: display timing aenderungen
      - siemens boards: adapt for background color = white
      - add boutcount feature for the siemens boards
        store the bootcount in the environment, as we have no softreset
        save registers on this hardware. Use therefore the CONFIG_BOOTCOUNT_ENV
        bootcount driver.
      - change spi mode from 3 to 0 for the lcd init
      - add gpio pin for lcd reset with state 0 and add mdelay
      - siemens boards: use own USB id's
      - add dfu serial and device number for siemens boards
        Add for the siemens boards the possibility to define in dfu mode,
        the iSerialNumber and the bcdDevice fields in the USB Device
      - fix upgrade mechanism based on bootcount
        Correct location of saveenv and remove not active variable.
        reboot board in case of empty kernel partition. Without
        these defines an empty kernel partition leads to an
        abort of boot process and one remains in u-boot prompt.
      - general cleanup of dxr2, pxm2 and rut boards
         * Remove net boot from bootcmd
           Ping can cause a crash on boards without ethernet phy.
           net_nfs command is used only for development
         * Add reset at the end of bootcmd
           In order to have an immediate reset of the boot when bootcmd
           fails, add reset at the end of bootcmd.
         * add nand_img_size
         * update nand_img_size
         * ddr3 timings updated with iocontrol property that can be
           modified via eeprom. New default parameters from software
           leveling with draco ES2.
      Signed-off-by: default avatarSamuel Egli <samuel.egli@siemens.com>
      Signed-off-by: default avatarPascal Bach <pascal.bach@siemens.com>
      Signed-off-by: default avatarRoger Meier <r.meier@siemens.com>
      Signed-off-by: default avatarHeiko Schocher <hs@denx.de>
      Cc: Matthias Michel <matthias.michel@siemens.com>
      Cc: Tom Rini <trini@ti.com>
  11. 01 Nov, 2013 1 commit
  12. 14 Oct, 2013 1 commit
  13. 28 Aug, 2013 1 commit