1. 14 Oct, 2013 1 commit
  2. 24 Jul, 2013 1 commit
  3. 15 Mar, 2013 1 commit
    • Simon Glass's avatar
      Replace __bss_end__ with __bss_end · 3929fb0a
      Simon Glass authored
      Note this is a tree-wide change affecting multiple architectures.
      
      At present we use __bss_start, but mostly __bss_end__. This seems
      inconsistent and in a number of places __bss_end is used instead.
      
      Change to use __bss_end for the BSS end symbol throughout U-Boot. This
      makes it possible to use the asm-generic/sections.h file on all
      archs.
      Signed-off-by: default avatarSimon Glass <sjg@chromium.org>
      3929fb0a
  4. 12 Mar, 2013 1 commit
    • Albert ARIBAUD's avatar
      Refactor linker-generated arrays · ef123c52
      Albert ARIBAUD authored
      Refactor linker-generated array code so that symbols
      which were previously linker-generated are now compiler-
      generated. This causes relocation records of type
      R_ARM_ABS32 to become R_ARM_RELATIVE, which makes
      code which uses LGA able to run before relocation as
      well as after.
      
      Note: this affects more than ARM targets, as linker-
      lists span possibly all target architectures, notably
      PowerPC.
      
      Conflicts:
      	arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds
      	arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds
      	arch/arm/cpu/armv7/omap-common/u-boot-spl.lds
      	board/ait/cam_enc_4xx/u-boot-spl.lds
      	board/davinci/da8xxevm/u-boot-spl-da850evm.lds
      	board/davinci/da8xxevm/u-boot-spl-hawk.lds
      	board/vpac270/u-boot-spl.lds
      Signed-off-by: default avatarAlbert ARIBAUD <albert.u.boot@aribaud.net>
      ef123c52
  5. 22 Oct, 2012 2 commits
    • Marek Vasut's avatar
      common: Discard the __u_boot_cmd section · 8b493a52
      Marek Vasut authored
      The command declaration now uses the new LG-array method to generate
      list of commands. Thus the __u_boot_cmd section is now superseded and
      redundant and therefore can be removed. Also, remove externed symbols
      associated with this section from include/command.h .
      Signed-off-by: default avatarMarek Vasut <marex@denx.de>
      Cc: Joe Hershberger <joe.hershberger@gmail.com>
      Cc: Mike Frysinger <vapier@gentoo.org>
      8b493a52
    • Marek Vasut's avatar
      common: Add .u_boot_list into all linker files · 55675142
      Marek Vasut authored
      Add section for the linker-generated lists into all possible linker
      files, so that everyone can easily use these lists. This is mostly
      a mechanical adjustment.
      Signed-off-by: default avatarMarek Vasut <marex@denx.de>
      Cc: Joe Hershberger <joe.hershberger@gmail.com>
      Cc: Mike Frysinger <vapier@gentoo.org>
      55675142
  6. 29 Jul, 2012 1 commit
  7. 20 Jun, 2012 2 commits
  8. 07 Nov, 2011 1 commit
  9. 20 Apr, 2011 1 commit
  10. 27 Mar, 2011 1 commit
  11. 27 Nov, 2010 1 commit
  12. 17 Nov, 2010 1 commit
    • Sebastien Carlier's avatar
      Switch from archive libraries to partial linking · 6d8962e8
      Sebastien Carlier authored
      Before this commit, weak symbols were not overridden by non-weak symbols
      found in archive libraries when linking with recent versions of
      binutils.  As stated in the System V ABI, "the link editor does not
      extract archive members to resolve undefined weak symbols".
      
      This commit changes all Makefiles to use partial linking (ld -r) instead
      of creating library archives, which forces all symbols to participate in
      linking, allowing non-weak symbols to override weak symbols as intended.
      This approach is also used by Linux, from which the gmake function
      cmd_link_o_target (defined in config.mk and used in all Makefiles) is
      inspired.
      
      The name of each former library archive is preserved except for
      extensions which change from ".a" to ".o".  This commit updates
      references accordingly where needed, in particular in some linker
      scripts.
      
      This commit reveals board configurations that exclude some features but
      include source files that depend these disabled features in the build,
      resulting in undefined symbols.  Known such cases include:
      - disabling CMD_NET but not CMD_NFS;
      - enabling CONFIG_OF_LIBFDT but not CONFIG_QE.
      Signed-off-by: default avatarSebastien Carlier <sebastien.carlier@gmail.com>
      6d8962e8
  13. 26 Oct, 2010 2 commits
    • Wolfgang Denk's avatar
      Replace CONFIG_SYS_GBL_DATA_SIZE by auto-generated value · 25ddd1fb
      Wolfgang Denk authored
      CONFIG_SYS_GBL_DATA_SIZE has always been just a bad workarond for not
      being able to use "sizeof(struct global_data)" in assembler files.
      Recent experience has shown that manual synchronization is not
      reliable enough.  This patch renames CONFIG_SYS_GBL_DATA_SIZE into
      GENERATED_GBL_DATA_SIZE which gets automatically generated by the
      asm-offsets tool.  In the result, all definitions of this value can be
      deleted from the board config files.  We have to make sure that all
      files that reference such data include the new <asm-offsets.h> file.
      
      No other changes have been done yet, but it is obvious that similar
      changes / simplifications can be done for other, related macro
      definitions as well.
      Signed-off-by: default avatarWolfgang Denk <wd@denx.de>
      Acked-by: default avatarKumar Gala <galak@kernel.crashing.org>
      25ddd1fb
    • Wolfgang Denk's avatar
      Rename CONFIG_SYS_INIT_RAM_END into CONFIG_SYS_INIT_RAM_SIZE · 553f0982
      Wolfgang Denk authored
      CONFIG_SYS_INIT_RAM_END was a misnomer as it suggests this might be
      some end address; to make the meaning more clear we rename it into
      CONFIG_SYS_INIT_RAM_SIZE
      
      No other code changes are performed in this patch, only minor editing
      of white space (due to the changed length) and the comments was done,
      where noticed.
      
      Note that the code for the PATI and cmi_mpc5xx board configurations
      looks seriously broken.  Last known maintainers on Cc:
      Signed-off-by: default avatarWolfgang Denk <wd@denx.de>
      Cc: Denis Peter <d.peter@mpl.ch>
      Cc: Martin Winistoerfer <martinwinistoerfer@gmx.ch>
      Acked-by: default avatarKumar Gala <galak@kernel.crashing.org>
      553f0982
  14. 18 Oct, 2010 4 commits
    • Peter Tyser's avatar
      powerpc: Cleanup BOOTFLAG_* references · d98b0523
      Peter Tyser authored
      Now that warm booting is not supported, there isn't a need for the
      BOOTFLAG_COLD and BOOTFLAG_WARM defines, so remove them.
      
      Note that this change makes the board info bd_bootflags field useless.
      It will always be set to 0, but we leave it around so that we don't
      break the board info structure that some OSes are expecting to be passed
      from U-Boot.
      Signed-off-by: default avatarPeter Tyser <ptyser@xes-inc.com>
      d98b0523
    • Wolfgang Denk's avatar
      config.mk cleanup: drop "-I$(TOPDIR)/board" entries · 1211a464
      Wolfgang Denk authored
      After the recent cleanups, a number of config.mk files consist only of
      a "PLATFORM_CPPFLAGS += -I$(TOPDIR)/board" entry whih is not needed.
      Remove such entries.  In most cases, that means that the whole
      config.mk file can be removed.
      Signed-off-by: default avatarWolfgang Denk <wd@denx.de>
      1211a464
    • Wolfgang Denk's avatar
      Makefile: move all Power Architecture boards into boards.cfg · 2ae18241
      Wolfgang Denk authored
      Clean up Makefile, and drop a lot of the config.mk files on the way.
      
      We now also automatically pick all boards that are listed in
      boards.cfg (and with all configurations), so we can drop the redundant
      entries from MAKEALL to avoid building these twice.
      Signed-off-by: default avatarWolfgang Denk <wd@denx.de>
      2ae18241
    • Wolfgang Denk's avatar
      Rename TEXT_BASE into CONFIG_SYS_TEXT_BASE · 14d0a02a
      Wolfgang Denk authored
      The change is currently needed to be able to remove the board
      configuration scripting from the top level Makefile and replace it by
      a simple, table driven script.
      
      Moving this configuration setting into the "CONFIG_*" name space is
      also desirable because it is needed if we ever should move forward to
      a Kconfig driven configuration system.
      Signed-off-by: default avatarWolfgang Denk <wd@denx.de>
      14d0a02a
  15. 21 Apr, 2010 1 commit
  16. 13 Apr, 2010 3 commits
  17. 03 Oct, 2009 1 commit
    • Peter Tyser's avatar
      ppc: Enable full relocation to RAM · 85829017
      Peter Tyser authored
      The following changes allow U-Boot to fully relocate from flash to
      RAM:
       - Remove linker scripts' .fixup sections from the .text section
       - Add -mrelocatable to PLATFORM_RELFLAGS for all boards
       - Define CONFIG_RELOC_FIXUP_WORKS for all boards
      
      Previously, U-Boot would partially relocate, but statically initialized
      pointers needed to be manually relocated.
      Signed-off-by: default avatarPeter Tyser <ptyser@xes-inc.com>
      85829017
  18. 23 Jul, 2009 1 commit
  19. 20 Mar, 2009 2 commits
    • Stefan Roese's avatar
      Separate mtdparts command from jffs2 · 68d7d651
      Stefan Roese authored
      Currently the mtdparts commands are included in the jffs2 command support.
      This doesn't make sense anymore since other commands (e.g. UBI) use this
      infrastructure as well now. This patch separates the mtdparts commands from
      the jffs2 commands making it possible to only select mtdparts when no JFFS2
      support is needed.
      Signed-off-by: default avatarStefan Roese <sr@denx.de>
      Signed-off-by: default avatarKyungmin Park <kyungmin.park@samsung.com>
      68d7d651
    • Trent Piepho's avatar
      Fix all linker script to handle all rodata sections · f62fb999
      Trent Piepho authored
      A recent gcc added a new unaligned rodata section called '.rodata.str1.1',
      which needs to be added the the linker script.  Instead of just adding this
      one section, we use a wildcard ".rodata*" to get all rodata linker section
      gcc has now and might add in the future.
      
      However, '*(.rodata*)' by itself will result in sub-optimal section
      ordering.  The sections will be sorted by object file, which causes extra
      padding between the unaligned rodata.str.1.1 of one object file and the
      aligned rodata of the next object file.  This is easy to fix by using the
      SORT_BY_ALIGNMENT command.
      
      This patch has not be tested one most of the boards modified.  Some boards
      have a linker script that looks something like this:
      
      *(.text)
      . = ALIGN(16);
      *(.rodata)
      *(.rodata.str1.4)
      *(.eh_frame)
      
      I change this to:
      
      *(.text)
      . = ALIGN(16);
      *(.eh_frame)
      *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
      
      This means the start of rodata will no longer be 16 bytes aligned.
      However, the boundary between text and rodata/eh_frame is still aligned to
      16 bytes, which is what I think the real purpose of the ALIGN call is.
      Signed-off-by: default avatarTrent Piepho <xyzzy@speakeasy.org>
      f62fb999
  20. 18 Nov, 2008 1 commit
  21. 21 Oct, 2008 1 commit
  22. 18 Oct, 2008 1 commit
  23. 10 Sep, 2008 3 commits
  24. 10 Jul, 2008 1 commit
  25. 12 Jun, 2008 1 commit
    • Becky Bruce's avatar
      Change initdram() return type to phys_size_t · 9973e3c6
      Becky Bruce authored
      This patch changes the return type of initdram() from long int to phys_size_t.
      This is required for a couple of reasons: long int limits the amount of dram
      to 2GB, and u-boot in general is moving over to phys_size_t to represent the
      size of physical memory.  phys_size_t is defined as an unsigned long on almost
      all current platforms.
      
      This patch *only* changes the return type of the initdram function (in
      include/common.h, as well as in each board's implementation of initdram).  It
      does not actually modify the code inside the function on any of the platforms;
      platforms which wish to support more than 2GB of DRAM will need to modify
      their initdram() function code.
      
      Build tested with MAKEALL for ppc, arm, mips, mips-el. Booted on powerpc
      MPC8641HPCN.
      Signed-off-by: default avatarBecky Bruce <becky.bruce@freescale.com>
      9973e3c6
  26. 20 May, 2008 1 commit
    • Wolfgang Denk's avatar
      Big white-space cleanup. · 53677ef1
      Wolfgang Denk authored
      This commit gets rid of a huge amount of silly white-space issues.
      Especially, all sequences of SPACEs followed by TAB characters get
      removed (unless they appear in print statements).
      
      Also remove all embedded "vim:" and "vi:" statements which hide
      indentation problems.
      Signed-off-by: default avatarWolfgang Denk <wd@denx.de>
      53677ef1
  27. 18 Apr, 2008 1 commit
  28. 14 Apr, 2008 1 commit
  29. 13 Apr, 2008 1 commit