1. 20 Sep, 2013 1 commit
  2. 24 Jul, 2013 1 commit
  3. 29 Jul, 2012 1 commit
  4. 03 Nov, 2011 1 commit
  5. 15 Oct, 2011 1 commit
  6. 17 Nov, 2010 1 commit
    • Sebastien Carlier's avatar
      Switch from archive libraries to partial linking · 6d8962e8
      Sebastien Carlier authored
      Before this commit, weak symbols were not overridden by non-weak symbols
      found in archive libraries when linking with recent versions of
      binutils.  As stated in the System V ABI, "the link editor does not
      extract archive members to resolve undefined weak symbols".
      This commit changes all Makefiles to use partial linking (ld -r) instead
      of creating library archives, which forces all symbols to participate in
      linking, allowing non-weak symbols to override weak symbols as intended.
      This approach is also used by Linux, from which the gmake function
      cmd_link_o_target (defined in config.mk and used in all Makefiles) is
      The name of each former library archive is preserved except for
      extensions which change from ".a" to ".o".  This commit updates
      references accordingly where needed, in particular in some linker
      This commit reveals board configurations that exclude some features but
      include source files that depend these disabled features in the build,
      resulting in undefined symbols.  Known such cases include:
      - disabling CMD_NET but not CMD_NFS;
      - enabling CONFIG_OF_LIBFDT but not CONFIG_QE.
      Signed-off-by: default avatarSebastien Carlier <sebastien.carlier@gmail.com>
  7. 18 Oct, 2010 2 commits
    • Wolfgang Denk's avatar
      Makefile: move all Power Architecture boards into boards.cfg · 2ae18241
      Wolfgang Denk authored
      Clean up Makefile, and drop a lot of the config.mk files on the way.
      We now also automatically pick all boards that are listed in
      boards.cfg (and with all configurations), so we can drop the redundant
      entries from MAKEALL to avoid building these twice.
      Signed-off-by: default avatarWolfgang Denk <wd@denx.de>
    • Wolfgang Denk's avatar
      Rename TEXT_BASE into CONFIG_SYS_TEXT_BASE · 14d0a02a
      Wolfgang Denk authored
      The change is currently needed to be able to remove the board
      configuration scripting from the top level Makefile and replace it by
      a simple, table driven script.
      Moving this configuration setting into the "CONFIG_*" name space is
      also desirable because it is needed if we ever should move forward to
      a Kconfig driven configuration system.
      Signed-off-by: default avatarWolfgang Denk <wd@denx.de>
  8. 23 Sep, 2010 1 commit
  9. 16 Jul, 2010 1 commit
    • Becky Bruce's avatar
      83xx/85xx/86xx: LBC register cleanup · f51cdaf1
      Becky Bruce authored
      Currently, 83xx, 86xx, and 85xx have a lot of duplicated code
      dedicated to defining and manipulating the LBC registers.  Merge
      this into a single spot.
      To do this, we have to decide on a common name for the data structure
      that holds the lbc registers - it will now be known as fsl_lbc_t, and we
      adopt a common name for the immap layouts that include the lbc - this was
      previously known as either im_lbc or lbus; use the former.
      In addition, create accessors for the BR/OR regs that use in/out_be32
      and use those instead of the mismash of access methods currently in play.
      I have done a successful ppc build all and tested a board or two from
      each processor family.
      Signed-off-by: default avatarBecky Bruce <beckyb@kernel.crashing.org>
      Acked-by: default avatarKim Phillips <kim.phillips@freescale.com>
      Signed-off-by: default avatarKumar Gala <galak@kernel.crashing.org>
  10. 27 Jul, 2009 1 commit
  11. 19 Jul, 2009 1 commit
  12. 12 Jun, 2009 1 commit
  13. 07 Feb, 2009 1 commit
  14. 29 Oct, 2008 1 commit
  15. 18 Oct, 2008 1 commit
  16. 24 Sep, 2008 1 commit
  17. 02 Jul, 2008 1 commit
  18. 12 Jun, 2008 1 commit
    • Becky Bruce's avatar
      Change initdram() return type to phys_size_t · 9973e3c6
      Becky Bruce authored
      This patch changes the return type of initdram() from long int to phys_size_t.
      This is required for a couple of reasons: long int limits the amount of dram
      to 2GB, and u-boot in general is moving over to phys_size_t to represent the
      size of physical memory.  phys_size_t is defined as an unsigned long on almost
      all current platforms.
      This patch *only* changes the return type of the initdram function (in
      include/common.h, as well as in each board's implementation of initdram).  It
      does not actually modify the code inside the function on any of the platforms;
      platforms which wish to support more than 2GB of DRAM will need to modify
      their initdram() function code.
      Build tested with MAKEALL for ppc, arm, mips, mips-el. Booted on powerpc
      Signed-off-by: default avatarBecky Bruce <becky.bruce@freescale.com>
  19. 04 Mar, 2008 1 commit
  20. 08 Jan, 2008 5 commits
  21. 17 Aug, 2007 1 commit
    • Kim Phillips's avatar
      mpc83xx: implement board_add_ram_info · bbea46f7
      Kim Phillips authored
      add board_add_ram_info, to make memory diagnostic output more
      consistent. u-boot banner output now looks like:
      DRAM:  256 MB (DDR1, 64-bit, ECC on)
      and for boards with SDRAM on the local bus, a line such as this is
      SDRAM: 64 MB (local bus)
      also replaced some magic numbers with their equivalent define names.
      Signed-off-by: default avatarKim Phillips <kim.phillips@freescale.com>
  22. 03 Jul, 2007 1 commit
  23. 02 Mar, 2007 1 commit
    • Paul Gortmaker's avatar
      mpc83xx: U-Boot support for Wind River SBC8349 · 91e25769
      Paul Gortmaker authored
      I've redone the SBC8349 support to match git-current, which
      incorporates all the MPC834x updates from Freescale since the 1.1.6
      release,  including the DDR changes.
      I've kept all the SBC8349 files as parallel as possible to the
      MPC8349EMDS ones for ease of maintenance and to allow for easy
      inspection of what was changed to support this board.  Hence the SBC8349
      U-Boot has FDT support and everything else that the MPC8349EMDS has.
      Fortunately the Freescale updates added support for boards using CS0,
      but I had to change spd_sdram.c to allow for board specific settings for
      the sdram_clk_cntl (it is/was hard coded to zero, and that remains the
      default if the board doesn't specify a value.)
      Hopefully this should be mergeable as-is and require no whitespace
      cleanups or similar, but if something doesn't measure up then let me
      know and I'll fix it.