1. 14 Oct, 2013 2 commits
  2. 07 Oct, 2013 1 commit
  3. 25 Sep, 2013 1 commit
  4. 20 Sep, 2013 1 commit
  5. 12 Sep, 2013 1 commit
  6. 11 Sep, 2013 1 commit
  7. 10 Sep, 2013 3 commits
    • Marek Vasut's avatar
      ARM: mxs: Add SanDisk Sansa Fuze+ board · 607232e4
      Marek Vasut authored
      Add STMP3780-based Sansa Fuze+ board. This board is a small PMP
      device sporting a CPU which was later rebranded to i.MX233 .
      Currently supported is USB gadget mode and MMC .
      Signed-off-by: default avatarMarek Vasut <marex@denx.de>
      Cc: Fabio Estevam <fabio.estevam@freescale.com>
      Cc: Otavio Salvador <otavio@ossystems.com.br>
      Cc: Stefano Babic <sbabic@denx.de>
      607232e4
    • Marek Vasut's avatar
      ARM: mxs: Add Creative ZEN XFi3 board · aa04fef4
      Marek Vasut authored
      Add STMP3780-based XFi3 board. This board is a small PMP device
      sporting a CPU which was later rebranded to i.MX233 . Currently
      supported is USB gadget mode and both external SD and internal
      Phison SD-NAND bridge .
      Signed-off-by: default avatarMarek Vasut <marex@denx.de>
      Cc: Fabio Estevam <fabio.estevam@freescale.com>
      Cc: Otavio Salvador <otavio@ossystems.com.br>
      Cc: Stefano Babic <sbabic@denx.de>
      aa04fef4
    • Marek Vasut's avatar
      ARM: mxs: Sort the mx23evk and mx23_olinuxino · 2f9c8ee0
      Marek Vasut authored
      These boards were not sortes in the boards.cfg, fix this.
      Signed-off-by: default avatarMarek Vasut <marex@denx.de>
      Cc: Fabio Estevam <fabio.estevam@freescale.com>
      Cc: Stefano Babic <sbabic@denx.de>
      Cc: Otavio Salvador <otavio@ossystems.com.br>
      2f9c8ee0
  8. 30 Aug, 2013 1 commit
  9. 28 Aug, 2013 1 commit
  10. 21 Aug, 2013 1 commit
  11. 20 Aug, 2013 1 commit
  12. 15 Aug, 2013 3 commits
  13. 09 Aug, 2013 4 commits
  14. 30 Jul, 2013 5 commits
  15. 26 Jul, 2013 1 commit
  16. 25 Jul, 2013 1 commit
  17. 24 Jul, 2013 1 commit
  18. 16 Jul, 2013 1 commit
  19. 15 Jul, 2013 1 commit
    • Tom Rini's avatar
      Revert "MIPS: Jz4740: Add qi_lb60 board support" · 54e458de
      Tom Rini authored
      The files board/qi/qi_lb60/qi_lb60.c and include/configs/qi_lb60.h were
      licensed under the GPL v3 or later, and not v2 or later.  As this is
      incompatible with the project, revert this board support until the
      responsible parties are available to re-license (if so desired) under
      GPL v2.
      Signed-off-by: default avatarTom Rini <trini@ti.com>
      54e458de
  20. 26 Jun, 2013 2 commits
  21. 22 Jun, 2013 1 commit
    • Mike Dunn's avatar
      pxa: add support for palmtreo680 board · 0dc0e846
      Mike Dunn authored
      This patch adds support for the Palm Treo 680 smartphone.  A quick overview of
      u-boot implementation on the treo 680...
      
      The treo 680 has a Diskonchip G4 nand flash chip.  This device has a 2k region
      that maps to the system bus at the reset vector in a NOR-like fashion so that it
      can be used as the boot device.  The phone is shipped with this 2k region
      configured as write-protected (can't be modified) and programmed with an initial
      program loader (IPL).  At power-up, this IPL loads the contents of two flash
      blocks to SDRAM and jumps to it.  The capacity of the two blocks is not large
      enough to hold all of u-boot, so a u-boot SPL is used.  To conserve flash space,
      these two blocks and the necessary number of subsequent blocks are programmed
      with a concatenated spl + u-boot image.  That way, the IPL will also load a
      portion of u-boot proper, and when the spl runs, it relocates the portion of
      u-boot that the IPL has already loaded, and then resumes loading the remaining
      part of u-boot before jumping to it.
      
      The default_environment is used (CONFIG_ENV_IS_NOWHERE) because I didn't think
      that having a writable environment was worth the cost of a flash block, although
      adding it would be straightforward.  I abuse the CONFIG_EXTRA_ENV_SETTINGS
      option to specify the usbtty for the console (CONFIG_SYS_CONSOLE_IS_IN_ENV).
      
      Support for the LCD is included, but currently it is only useful for displaying
      the u-boot splash screen.  But if u-boot is built without the usbtty console, it
      does display the auto-boot progress nicely.
      Signed-off-by: default avatarMike Dunn <mikedunn@newsguy.com>
      0dc0e846
  22. 20 Jun, 2013 6 commits