1. 22 Jul, 2015 2 commits
  2. 26 Jun, 2015 2 commits
  3. 15 Jun, 2015 2 commits
  4. 08 May, 2015 1 commit
  5. 13 Mar, 2015 1 commit
  6. 30 Jan, 2015 2 commits
  7. 29 Jan, 2015 1 commit
  8. 05 Jan, 2015 1 commit
  9. 05 Nov, 2014 1 commit
  10. 23 Oct, 2014 1 commit
  11. 10 Oct, 2014 1 commit
  12. 25 Sep, 2014 2 commits
  13. 24 Sep, 2014 1 commit
    • Nikita Kiryanov's avatar
      spl: replace CONFIG_SPL_SPI_* with CONFIG_SF_DEFAULT_* · 88e34e5f
      Nikita Kiryanov authored
      Currently, CONFIG_SPL_SPI_* #defines are used for controlling SPI boot in
      SPL. These #defines do not allow the user to select SPI mode for the SPI flash
      (there's no CONFIG_SPL_SPI_MODE, so the SPI mode is hardcoded in
      spi_spl_load.c), and duplicate information already provided by
      CONFIG_SF_DEFAULT_* #defines.
      
      Kill CONFIG_SPL_SPI_*, and use CONFIG_SF_DEFAULT_* instead.
      
      Cc: Tom Rini <trini@ti.com>
      Cc: Marek Vasut <marex@denx.de>
      Cc: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
      Cc: Lokesh Vutla <lokeshvutla@ti.com>
      Cc: Vitaly Andrianov <vitalya@ti.com>
      Cc: Lars Poeschel <poeschel@lemonage.de>
      Cc: Bo Shen <voice.shen@atmel.com>
      Cc: Hannes Petermaier <hannes.petermaier@br-automation.com>
      Cc: Michal Simek <monstr@monstr.eu>
      Acked-by: default avatarMarek Vasut <marex@denx.de>
      Signed-off-by: default avatarNikita Kiryanov <nikita@compulab.co.il>
      Reviewed-by: default avatarJagannadha Sutradharudu Teki <jaganna@xilinx.com>
      88e34e5f
  14. 18 Sep, 2014 1 commit
  15. 25 Aug, 2014 3 commits
  16. 25 Jul, 2014 2 commits
    • pekon gupta's avatar
      ARM: omap: move board specific NAND configs out from ti_armv7_common.h · 434f2cfc
      pekon gupta authored
      This patch moves some board specific NAND configs:
      - FROM: generic config file 'ti_armv7_common.h'
      - TO:   individual board config files using these configs.
      So that each board can independently set the value as per its design.
      
      Following configs are affected in this patch:
        CONFIG_SYS_NAND_U_BOOT_OFFS: <refer doc/README.nand>
        CONFIG_CMD_SPL_NAND_OFS: <refer doc/README.falcon>
        CONFIG_SYS_NAND_SPL_KERNEL_OFFS: <refer doc/README.falcon>
        CONFIG_CMD_SPL_WRITE_SIZE: <refer doc/README.falcon>
      
      This patch also updates documentation for few of above NAND configs.
      Signed-off-by: default avatarPekon Gupta <pekon@ti.com>
      434f2cfc
    • pekon gupta's avatar
      ARM: omap: fix GPMC address-map size for NAND and NOR devices · 77cd89e7
      pekon gupta authored
      Fixes commit a0a37183
          ARM: omap: merge GPMC initialization code for all platform
      
      1) NAND device are not directly memory-mapped to CPU address-space, they are
       indirectly accessed via following GPMC registers:
       - GPMC_NAND_COMMAND_x
       - GPMC_NAND_ADDRESS_x
       - GPMC_NAND_DATA_x
       Therefore from CPU's point of view, NAND address-map can be limited to just
       above register addresses. But GPMC chip-select address-map can be configured
       in granularity of 16MB only.
       So this patch uses GPMC_SIZE_16M for all NAND devices.
      
      2) NOR device are directly memory-mapped to CPU address-space, so its
       address-map size depends on actual addressable region in NOR FLASH device.
       So this patch uses CONFIG_SYS_FLASH_SIZE to derive GPMC chip-select address-map
       size configuration.
      Signed-off-by: default avatarPekon Gupta <pekon@ti.com>
      77cd89e7
  17. 22 Jul, 2014 1 commit
  18. 19 Jun, 2014 1 commit
  19. 11 Jun, 2014 3 commits
  20. 05 May, 2014 2 commits
  21. 17 Apr, 2014 3 commits
  22. 28 Mar, 2014 1 commit
  23. 12 Mar, 2014 1 commit
    • Tom Rini's avatar
      am335x_evm: Remove SPI SPL from NOR support target · e3176754
      Tom Rini authored
      When using the am335x_evm_nor target one is generally expecting to be
      used in an environment when you want to program the NOR and not a
      "deployment" type target.  In addition this only supports the Beaglebone
      White with the memory cape and NOR module installed, which precludes the
      presence of SPI flash.  Drop SPI as we were getting close to the binary
      limit in some cases and slightly over with other toolchains.
      Signed-off-by: default avatarTom Rini <trini@ti.com>
      e3176754
  24. 04 Mar, 2014 2 commits
    • pekon gupta's avatar
      mtd: nand: omap: remove unused #defines from common omap_gpmc.h · a7e36fc9
      pekon gupta authored
      OMAP NAND driver can detect Page-size and OOB-size of NAND device from ONFI
      params or nand_id[] table. And based on that it defines ECC layout.
      This patch
      1) removes following board configs used for defining NAND ECC layout
      	- GPMC_NAND_ECC_LP_x16_LAYOUT (for large page x16 NAND)
      	- GPMC_NAND_ECC_LP_x8_LAYOUT  (for large page x8 NAND)
      	- GPMC_NAND_ECC_SP_x16_LAYOUT (for small page x16 NAND)
      	- GPMC_NAND_ECC_SP_x8_LAYOUT  (for small page x8 NAND)
      
      2) removes unused #defines in common omap_gpmc.h depending on above configs
      
      Build tested using: ./MAKEALL -s am33xx -s omap3 -s omap4 -s omap5
      Signed-off-by: default avatarPekon Gupta <pekon@ti.com>
      a7e36fc9
    • Mugunthan V N's avatar
      drivers: net: cpsw: add support to have phy address from cpsw platform data · 9c653aad
      Mugunthan V N authored
      Some platforms like AM437x have different EVMs with different phy addresses,
      so this patch adds support for passing phy address via cpsw plaform data.
      Also renamed phy_id to phy_addr so better understanding of the code.
      Reviewed-by: default avatarFelipe Balbi <balbi@ti.com>
      Signed-off-by: default avatarMugunthan V N <mugunthanvnm@ti.com>
      [trini: Update BuR am335x_igep0033 pcm051_rev3 pcm051_rev1 cm_t335
      pengwyn boards]
      Signed-off-by: default avatarTom Rini <trini@ti.com>
      9c653aad
  25. 21 Feb, 2014 2 commits