1. 19 Mar, 2018 1 commit
    • Ye Li's avatar
      MLK-17821-1 USB: gadget: Add the cadence USB3 gadget driver · 70514bd0
      Ye Li authored
      Porting the cadence USB3 (CDNS3) driver from kernel to u-boot. We only support
      the gadget (device mode), while the host mode is not supported. Users remains
      to use xhci-imx8 driver for host mode.
      Some changes in the CDNS3 driver porting:
      1. Add match_ep call back to usb_gadget_ops. The CDNS3 gadget driver replies
         on this operation to bind the usb_ep/usb_ss_ep with the endpoint descriptor
         when function layer uses usb_ep_autoconfig to add endpoint descriptors to gadget.
         So that CDNS3 driver can know the EP information and configure the EP once the
         set configuration request is received.
      2. U-boot does not have CMA, so it won't allocate uncached memory. Need to flush
         TRB and its DMA buffer before prime to usb controller and after complete transfer.
      3. In core.c, we add functions to hook with u-boot. It needs uplayer like
         to pass the register base address of each part of the USB controller.
      4. Force the CDNS3 gadget max speed to HS. The SuperSpeed is not supported by u-boot,
         so disable it in gadget driver. A configuration USB_CDNS3_GADGET_FORCE_HIGHSPEED is
      5. Added gadget_is_cdns3 checking to provide bcdUSB value in device descriptor.
      6. Moved some new fields in usb_ep structure to usb_ss_ep, since u-boot does not have them.
      7. Remove host part codes as it is not supported by this driver.
      Signed-off-by: 's avatarYe Li <ye.li@nxp.com>
      Acked-by: 's avatarPeter Chen <peter.chen@nxp.com>
  2. 02 Nov, 2017 3 commits
    • Andre Przywara's avatar
      Makefile: add rules to generate SPL FIT images · eda04b31
      Andre Przywara authored
      Some platforms require more complex U-Boot images than we can easily
      generate via the mkimage command line, for instance to load additional
      image files.
      which can either hold an .its source file describing the image layout,
      or, in the second case, a generator tool (script) to create such
      a source file. This script gets passed the list of device tree files
      from the CONFIG_OF_LIST variable.
      A platform or board can define either of those in their defconfig file
      to allow an easy building of such an image.
      Signed-off-by: 's avatarAndre Przywara <andre.przywara@arm.com>
      Reviewed-by: 's avatarJagan Teki <jagan@openedev.com>
      (cherry picked from commit 1a12fdc461421b5a385ab5d7926e5425d429d48e)
    • Ye Li's avatar
      MLK-15325-2 imx8m: Remove ARM trusted firmware bl31 image · d20b5993
      Ye Li authored
      Have changed to use imx-mkimage to package images, move the ARM trusted
      firmware bl31 image out of u-boot to imx-mkimage.
      Signed-off-by: 's avatarYe Li <ye.li@nxp.com>
    • Peng Fan's avatar
      MLK-15142-10 Makefile: bind ATF for i.MX8M · 8791912c
      Peng Fan authored
      Bind ATF with u-boot-nodtb.bin together.
      Since now ATF's entry is 0x40001000, so when
      generating u-boot.img, we use 0x40001000
      as the load and entry address.
      Signed-off-by: 's avatarPeng Fan <peng.fan@nxp.com>
  3. 13 Mar, 2017 1 commit
  4. 09 Mar, 2017 1 commit
  5. 27 Feb, 2017 1 commit
  6. 13 Feb, 2017 1 commit
  7. 08 Feb, 2017 3 commits
    • Masahiro Yamada's avatar
      kbuild: beautify the log of config whitelist check · 1bdd942b
      Masahiro Yamada authored
      Use the kbuild style log.
      Prior to this commit:
      ./scripts/check-config.sh u-boot.cfg \
      	./scripts/config_whitelist.txt . 1>&2
      With this commit:
        CFGCHK  u-boot.cfg
      Signed-off-by: 's avatarMasahiro Yamada <yamada.masahiro@socionext.com>
      Reviewed-by: 's avatarSimon Glass <sjg@chromium.org>
    • Masahiro Yamada's avatar
      cmd: rework "license" command · d726f225
      Masahiro Yamada authored
      The previous commit ("add a new command to show .config contents")
      improves the basic infrastructure of "embed a compressed file into
      the U-Boot image, and print it by a command".  The same pattern for
      the "license" command.
      This commit reworks the command to improve the following:
      [1] Improve log style
      Kbuild style log
        GZIP    cmd/license_data.gz
        CHK     cmd/license_data_gz.h
        UPD     cmd/license_data_gz.h
        CHK     cmd/license_data_size.h
        UPD     cmd/license_data_size.h
      instead of the bare Make log:
      cat ./Licenses/gpl-2.0.txt | gzip -9 -c | \
      		tools/bin2header license_gzip > ./include/license.h
      [2] Collect related code into the "cmd" directory
      Prior to this commit, the license.h was created by tools/Makefile,
      placed under the "include" directory, included from cmd/license.c,
      and deleted by the top-level Makefile.  It is not a good idea to
      scatter related code.
      [3] Drop the fixed-malloc size LICENSE_MAX
      Just allocate the minimum required size of buffer because we know
      the size of the original gpl-2.0.txt.
      [4] Fix more issues
      Terminate the buffer with zero to prevent puts() from over-running.
      Add "static" to do_license.
      Signed-off-by: 's avatarMasahiro Yamada <yamada.masahiro@socionext.com>
      Reviewed-by: 's avatarSimon Glass <sjg@chromium.org>
    • Masahiro Yamada's avatar
      cmd: add a new command "config" to show .config contents · 61304dbe
      Masahiro Yamada authored
      This feature is inspired by /proc/config.gz of Linux.  In Linux,
      if CONFIG_IKCONFIG is enabled, the ".config" file contents are
      embedded in the kernel image.  If CONFIG_IKCONFIG_PROC is also
      enabled, the ".config" contents are exposed to /proc/config.gz.
      Users can do "zcat /proc/config.gz" to check which config options
      are enabled on the running kernel image.
      The idea is almost the same here; if CONFIG_CMD_CONFIG is enabled,
      the ".config" contents are compressed and saved in the U-Boot image,
      then printed by the new command "config".
      The usage is quite simple.  Enable CONFIG_CMD_CONFIG, then run
       > config
      from the command line interface.  The ".config" contents will be
      printed on the console.
      This feature increases the U-Boot image size by about 4KB (this is
      mostly due to the gzip-compressed .config file).  By default, it is
      enabled only for Sandbox because we do not care about the memory
      footprint on it.  Of course, this feature is architecture agnostic,
      so you can enable it on any board if the image size increase is
      acceptable for you.
      Signed-off-by: 's avatarMasahiro Yamada <yamada.masahiro@socionext.com>
      Reviewed-by: 's avatarSimon Glass <sjg@chromium.org>
  8. 06 Feb, 2017 1 commit
  9. 01 Feb, 2017 1 commit
  10. 31 Jan, 2017 1 commit
  11. 09 Jan, 2017 1 commit
  12. 03 Jan, 2017 1 commit
  13. 02 Jan, 2017 2 commits
  14. 19 Dec, 2016 4 commits
  15. 05 Dec, 2016 1 commit
  16. 02 Dec, 2016 1 commit
    • Simon Glass's avatar
      Makefile: Add a target to create the .cfg files · 1bd87630
      Simon Glass authored
      A common requirement when converting CONFIG options to Kconfig is to check
      that the effective configuration has not changed due to the conversion. Add
      a target which creates this configuration (in the form of u-boot.cfg) but
      does not build U-Boot. This speeds up the checking.
      Signed-off-by: 's avatarSimon Glass <sjg@chromium.org>
  17. 14 Nov, 2016 3 commits
  18. 31 Oct, 2016 1 commit
  19. 30 Oct, 2016 1 commit
  20. 18 Oct, 2016 1 commit
  21. 07 Oct, 2016 2 commits
    • Masahiro Yamada's avatar
      kbuild: generate u-boot.cfg as a byproduct of include/autoconf.mk · e19b0fb4
      Masahiro Yamada authored
      Our build system still parses ad-hoc CONFIG options in header files
      and generates include/autoconf.mk so that Makefiles can reference
      them.  This gimmick was introduced in the pre-Kconfig days and will
      be kept until Kconfig migration is completed.
      The include/autoconf.mk is generated like follows:
        [1] Preprocess include/common.h with -DDO_DEPS_ONLY and
            retrieve macros into include/autoconf.mk.tmp
        [2] Reformat include/autoconf.mk.dep into include/autoconf.mk
            with tools/scripts/define2mk.sed script
        [3] Remove include/autoconf.mk.tmp
      Here, include/autoconf.mk.tmp is similar to u-boot.cfg, which is
      also generated by preprocessing include/config.h with -DDO_DEPS_ONLY.
      In other words, there is much overlap among include/autoconf.mk and
      u-boot.cfg build rules.
      So, the idea is to split the build rule of include/autoconf.mk
      into two stages.  The first preprocesses headers into u-boot.cfg.
      The second parses the u-boot.cfg into include/autoconf.mk.  The
      build rules of u-boot.cfg in Makefile and spl/Makefile will be gone.
      Signed-off-by: 's avatarMasahiro Yamada <yamada.masahiro@socionext.com>
      Reviewed-by: 's avatarSimon Glass <sjg@chromium.org>
    • Masahiro Yamada's avatar
      kbuild: move no_new_adhoc_configs_check to "all" target command · 4bf06d11
      Masahiro Yamada authored
      I am going to move the build rule of u-boot.cfg.  Before that,
      no_new_adhoc_configs_check must be tweaked to not depend on it.
      The ad-hoc option check can be done at the end of build, along
      with other checks.
      Signed-off-by: 's avatarMasahiro Yamada <yamada.masahiro@socionext.com>
      Reviewed-by: 's avatarSimon Glass <sjg@chromium.org>
  22. 06 Oct, 2016 1 commit
  23. 03 Oct, 2016 1 commit
  24. 22 Sep, 2016 2 commits
    • Stephen Warren's avatar
      Makefile: rm u-boot.cfg dependencies are missing · a6c13097
      Stephen Warren authored
      Prior to the previous patch, a freshly created .u-boot.cfg.cmd may not
      correctly represent all dependencies for u-boot.cfg. The previous change
      only solved this issue for fresh builds; when performing an incremental
      build, the deficient .u-boot.cfg.cmd is already present, so u-boot.cfg
      is not rebuilt, and hence .u-boot.cfg.cmd is not rebuilt with the correct
      Solve this by explicitly detecting when the dependency file .u-boot.cfg.d
      has not been integrated into .u-boot.cfg.cmd, and force u-boot.cfg to be
      rebuilt in this case by deleting it first. This is possible since
      if_changed_dep will always delete .u-boot.cfg.d when it executes
      successfully, so its presence means either that the previous build was
      made by a source tree that contained a Makefile that didn't include the
      previous patch, or that the build failed part way through executing
      if_changed_dep for u-boot.cfg. Forcing a rebuild of u-boot.cfg is required
      in the former case, and will cause no additional work in the latter case,
      since the file would be rebuilt anyway for the same reason it was being
      rebuilt by the previous build.
      Signed-off-by: 's avatarStephen Warren <swarren@nvidia.com>
    • Stephen Warren's avatar
      Makefile: use if_change_dep for u-boot.cfg · fcd29a4d
      Stephen Warren authored
      cmd_cpp_cfg generates a dependency output, but because it's invoked using
      if_changed rather than if_changed_dep, that dependency file is ignored.
      This results in Kbuild not knowing about which files u-boot.cfg depends
      on, so it may not be rebuilt when required.
      A practical result of this is that u-boot.cfg may continue to reference
      CONFIG_ options that no longer exist in the source tree, and this can
      cause the adhoc config options check to fail.
      This change modifies Makefile to use if_changed_dep, which in turn causes
      all dependencies to be known to the next make invocation.
      Signed-off-by: 's avatarStephen Warren <swarren@nvidia.com>
  25. 16 Sep, 2016 1 commit
  26. 14 Sep, 2016 1 commit
  27. 12 Sep, 2016 1 commit
  28. 23 Aug, 2016 1 commit