1. 25 May, 2016 1 commit
  2. 02 Nov, 2015 1 commit
  3. 17 Aug, 2015 1 commit
  4. 13 Feb, 2015 1 commit
  5. 17 Nov, 2014 1 commit
  6. 05 Sep, 2014 1 commit
  7. 31 May, 2014 1 commit
  8. 20 Oct, 2013 1 commit
  9. 24 Jul, 2013 1 commit
  10. 05 Jul, 2013 1 commit
  11. 12 Mar, 2013 1 commit
  12. 08 Mar, 2013 1 commit
  13. 20 Feb, 2013 1 commit
  14. 01 Sep, 2012 1 commit
  15. 09 Jul, 2012 1 commit
  16. 15 May, 2012 1 commit
  17. 26 May, 2011 1 commit
  18. 01 Feb, 2011 1 commit
  19. 23 Aug, 2010 2 commits
  20. 17 Aug, 2010 1 commit
  21. 05 Jul, 2010 1 commit
  22. 13 Apr, 2010 1 commit
  23. 14 Oct, 2009 1 commit
  24. 05 Oct, 2009 1 commit
  25. 12 Jun, 2008 1 commit
    • Becky Bruce's avatar
      Change initdram() return type to phys_size_t · 9973e3c6
      Becky Bruce authored
      This patch changes the return type of initdram() from long int to phys_size_t.
      This is required for a couple of reasons: long int limits the amount of dram
      to 2GB, and u-boot in general is moving over to phys_size_t to represent the
      size of physical memory.  phys_size_t is defined as an unsigned long on almost
      all current platforms.
      
      This patch *only* changes the return type of the initdram function (in
      include/common.h, as well as in each board's implementation of initdram).  It
      does not actually modify the code inside the function on any of the platforms;
      platforms which wish to support more than 2GB of DRAM will need to modify
      their initdram() function code.
      
      Build tested with MAKEALL for ppc, arm, mips, mips-el. Booted on powerpc
      MPC8641HPCN.
      Signed-off-by: default avatarBecky Bruce <becky.bruce@freescale.com>
      9973e3c6
  26. 10 Oct, 2004 1 commit
    • wdenk's avatar
      Patches by Scott McNutt, 24 Aug 2004: · 5c952cf0
      wdenk authored
      - Add support for Altera Nios-II processors.
      - Add support for Psyent PCI-5441 board.
      - Add support for Psyent PK1C20 board.
      5c952cf0
  27. 08 Dec, 2003 1 commit
  28. 07 Nov, 2003 1 commit
  29. 29 Oct, 2003 1 commit
    • wdenk's avatar
      * Prepare for release · 5fa66df6
      wdenk authored
      * Fix problems in memory test on some boards (which was not
        non-destructive as intended)
      
      * Patch by Gary Jennejohn, 28 Oct 2003:
        Change fs/fat/fat.c to put I/O buffers in BSS instead on the stack
        to prevent stack overflow on ARM systems
      5fa66df6
  30. 11 Sep, 2003 1 commit
    • wdenk's avatar
      * Patch by Gary Jennejohn, 11 Sep 2003: · a43278a4
      wdenk authored
        - allow for longer timeouts for USB mass storage devices
      
      * Patch by Denis Peter, 11 Sep 2003:
        - fix USB data pointer assignment for bulk only transfer.
        - prevent to display erased directories in FAT filesystem.
      
      * Change output format for NAND flash - make it look like for other
        memory, too
      a43278a4
  31. 31 Aug, 2003 1 commit
    • wdenk's avatar
      Patch by Yuli Barcohen, 7 Aug 2003: · 326428cc
      wdenk authored
      According to the MPC8260 User's Manual, PCI_MODE signal should be
      reflected in SCCR register, and local bus pins configuration is taken
      from HRCW and appears in SIUMCR. For some reason it does not work
      this way, so the only possibility to detect if the board is
      configured in PCI mode is to check the BCSR. This patch sets SCCR and
      SIUMCR according to the BCSR.
      326428cc
  32. 28 Aug, 2003 1 commit
  33. 17 Aug, 2003 1 commit
    • wdenk's avatar
      * Make Ethernet autonegotiation on INCA-IP work for all clock rates; · e0ac62d7
      wdenk authored
        allow selection of clock frequency as "make" target
      
      * Implement memory autosizing code for IceCube boards
      
      * Configure network port on INCA-IP for autonegotiation
      
      * Fix overflow problem in network timeout code
      
      * Patch by Richard Woodruff, 8 Aug 2003:
        Allow crc32 to be used at address 0x000 (crc32_no_comp, too).
      e0ac62d7
  34. 17 Jul, 2003 1 commit
    • wdenk's avatar
      * Patch by Martin Krause, 17 Jul 2003: · 2535d602
      wdenk authored
        add delay to get I2C working with "imm" command and s3c24x0_i2c.c
      
      * Patch by Richard Woodruff, 17 July 03:
        - Fixed bug in OMAP1510 baud rate divisor settings.
      
      * Patch by Nye Liu, 16 July 2003:
        MPC860FADS fixes:
        - add MPC86xADS support (uses MPC86xADS.h)
        - add 866P/T core support (also MPC859T/MPC859DSL/MPC852T)
          o PLPRCR changes
          o BRG changes (EXTAL/XTAL restricted to 10MHz)
          o don't trust gclk() software measurement by default, depend on
            CONFIG_8xx_GCLK_FREQ
        - add DRAM SIMM not installed detection
        - use more "correct" SDRAM initialization sequence
        - allow different SDRAM sizes (8xxADS has 8M)
        - default DER is 0
        - remove unused MAMR defines from FADS860T.h (all done in fads.c)
        - rename MAMR/MBMR defines to be more consistent. Should eventually
          be merged into MxMR to better reflect the PowerQUICC datasheet.
      
      * Patch by Yuli Barcohen, 16 Jul 2003:
        support new Motorola PQ2FADS-ZU evaluation board which replaced
        MPC8260ADS and MPC8266ADS
      2535d602
  35. 16 Jul, 2003 1 commit
  36. 14 Jul, 2003 1 commit
    • wdenk's avatar
      * Patches by Yuli Barcohen, 13 Jul 2003: · 8564acf9
      wdenk authored
        - Correct flash and JFFS2 support for MPC8260ADS
        - fix PVR values and clock generation for PowerQUICC II family
          (8270/8275/8280)
      
      * Patch by Bernhard Kuhn, 08 Jul 2003:
        - add support for M68K targets
      
      * Patch by Ken Chou, 3 Jul:
        - Fix PCI config table for A3000
        - Fix iobase for natsemi.c
          (PCI_BASE_ADDRESS_0 is the IO base register for DP83815)
      
      * Allow to enable "slow" POST routines by key press on power-on
      * Fix temperature dependend switching of LCD backlight on LWMON
      * Tweak output format for LWMON
      8564acf9
  37. 30 Jun, 2003 1 commit
    • wdenk's avatar
      * Patch by Seb James, 30 Jun 2003: · b37c7e5e
      wdenk authored
        Improve documentation of I2C configuration in README
      
      * Fix problems with previous log buffer "fixes"
      
      * Fix minor help text issues
      
      * "log append" did not append a newline
      b37c7e5e
  38. 27 Jun, 2003 1 commit
    • wdenk's avatar
      * Code cleanup: · 8bde7f77
      wdenk authored
        - remove trailing white space, trailing empty lines, C++ comments, etc.
        - split cmd_boot.c (separate cmd_bdinfo.c and cmd_load.c)
      
      * Patches by Kenneth Johansson, 25 Jun 2003:
        - major rework of command structure
          (work done mostly by Michal Cendrowski and Joakim Kristiansen)
      8bde7f77
  39. 26 Jun, 2003 1 commit