1. 13 Sep, 2014 1 commit
  2. 30 Jul, 2014 2 commits
    • Masahiro Yamada's avatar
      Add board MAINTAINERS files · 93d4334f
      Masahiro Yamada authored
      We have switched to Kconfig and the boards.cfg file is going to
      be removed. We have to retrieve the board status and maintainers
      information from it.
      
      The MAINTAINERS format as in Linux Kernel would be nice
      because we can crib the scripts/get_maintainer.pl script.
      
      After some discussion, we chose to put a MAINTAINERS file under each
      board directory, not the top-level one because we want to collect
      relevant information for a board into a single place.
      
      TODO:
      Modify get_maintainer.pl to scan multiple MAINTAINERS files.
      Signed-off-by: default avatarMasahiro Yamada <yamada.m@jp.panasonic.com>
      Suggested-by: default avatarTom Rini <trini@ti.com>
      Acked-by: default avatarSimon Glass <sjg@chromium.org>
      93d4334f
    • Masahiro Yamada's avatar
      kconfig: add board Kconfig and defconfig files · dd84058d
      Masahiro Yamada authored
      This commit adds:
       - arch/${ARCH}/Kconfig
          provide a menu to select target boards
       - board/${VENDOR}/${BOARD}/Kconfig or board/${BOARD}/Kconfig
          set CONFIG macros to the appropriate values for each board
       - configs/${TARGET_BOARD}_defconfig
          default setting of each board
      
      (This commit was automatically generated by a conversion script
      based on boards.cfg)
      
      In Linux Kernel, defconfig files are located under
      arch/${ARCH}/configs/ directory.
      It works in Linux Kernel since ARCH is always given from the
      command line for cross compile.
      
      But in U-Boot, ARCH is not given from the command line.
      Which means we cannot know ARCH until the board configuration is done.
      That is why all the "*_defconfig" files should be gathered into a
      single directory ./configs/.
      Signed-off-by: default avatarMasahiro Yamada <yamada.m@jp.panasonic.com>
      Acked-by: default avatarSimon Glass <sjg@chromium.org>
      dd84058d
  3. 01 Nov, 2013 1 commit
  4. 24 Jul, 2013 1 commit
  5. 17 Nov, 2010 1 commit
    • Sebastien Carlier's avatar
      Switch from archive libraries to partial linking · 6d8962e8
      Sebastien Carlier authored
      Before this commit, weak symbols were not overridden by non-weak symbols
      found in archive libraries when linking with recent versions of
      binutils.  As stated in the System V ABI, "the link editor does not
      extract archive members to resolve undefined weak symbols".
      
      This commit changes all Makefiles to use partial linking (ld -r) instead
      of creating library archives, which forces all symbols to participate in
      linking, allowing non-weak symbols to override weak symbols as intended.
      This approach is also used by Linux, from which the gmake function
      cmd_link_o_target (defined in config.mk and used in all Makefiles) is
      inspired.
      
      The name of each former library archive is preserved except for
      extensions which change from ".a" to ".o".  This commit updates
      references accordingly where needed, in particular in some linker
      scripts.
      
      This commit reveals board configurations that exclude some features but
      include source files that depend these disabled features in the build,
      resulting in undefined symbols.  Known such cases include:
      - disabling CMD_NET but not CMD_NFS;
      - enabling CONFIG_OF_LIBFDT but not CONFIG_QE.
      Signed-off-by: default avatarSebastien Carlier <sebastien.carlier@gmail.com>
      6d8962e8
  6. 18 Oct, 2010 2 commits
    • Wolfgang Denk's avatar
      Makefile: move all Power Architecture boards into boards.cfg · 2ae18241
      Wolfgang Denk authored
      Clean up Makefile, and drop a lot of the config.mk files on the way.
      
      We now also automatically pick all boards that are listed in
      boards.cfg (and with all configurations), so we can drop the redundant
      entries from MAKEALL to avoid building these twice.
      Signed-off-by: default avatarWolfgang Denk <wd@denx.de>
      2ae18241
    • Wolfgang Denk's avatar
      Rename TEXT_BASE into CONFIG_SYS_TEXT_BASE · 14d0a02a
      Wolfgang Denk authored
      The change is currently needed to be able to remove the board
      configuration scripting from the top level Makefile and replace it by
      a simple, table driven script.
      
      Moving this configuration setting into the "CONFIG_*" name space is
      also desirable because it is needed if we ever should move forward to
      a Kconfig driven configuration system.
      Signed-off-by: default avatarWolfgang Denk <wd@denx.de>
      14d0a02a
  7. 18 Oct, 2008 1 commit
  8. 10 Sep, 2008 3 commits
  9. 03 Sep, 2008 1 commit
  10. 12 Jun, 2008 1 commit
    • Becky Bruce's avatar
      Change initdram() return type to phys_size_t · 9973e3c6
      Becky Bruce authored
      This patch changes the return type of initdram() from long int to phys_size_t.
      This is required for a couple of reasons: long int limits the amount of dram
      to 2GB, and u-boot in general is moving over to phys_size_t to represent the
      size of physical memory.  phys_size_t is defined as an unsigned long on almost
      all current platforms.
      
      This patch *only* changes the return type of the initdram function (in
      include/common.h, as well as in each board's implementation of initdram).  It
      does not actually modify the code inside the function on any of the platforms;
      platforms which wish to support more than 2GB of DRAM will need to modify
      their initdram() function code.
      
      Build tested with MAKEALL for ppc, arm, mips, mips-el. Booted on powerpc
      MPC8641HPCN.
      Signed-off-by: default avatarBecky Bruce <becky.bruce@freescale.com>
      9973e3c6
  11. 03 Jul, 2007 1 commit
  12. 08 Oct, 2006 1 commit
  13. 01 Sep, 2006 1 commit
    • Marian Balakowicz's avatar
      Add support for a saving build objects in a separate directory. · f9328639
      Marian Balakowicz authored
      Modifications are based on the linux kernel approach and
      support two use cases:
      
        1) Add O= to the make command line
        'make O=/tmp/build all'
      
        2) Set environement variable BUILD_DIR to point to the desired location
        'export BUILD_DIR=/tmp/build'
        'make'
      
      The second approach can also be used with a MAKEALL script
      'export BUILD_DIR=/tmp/build'
      './MAKEALL'
      
      Command line 'O=' setting overrides BUILD_DIR environent variable.
      
      When none of the above methods is used the local build is performed and
      the object files are placed in the source directory.
      f9328639
  14. 31 Mar, 2006 1 commit
  15. 12 Dec, 2005 1 commit
  16. 31 Aug, 2005 1 commit
  17. 06 Jan, 2004 1 commit
  18. 27 Jun, 2003 1 commit
    • wdenk's avatar
      * Code cleanup: · 8bde7f77
      wdenk authored
        - remove trailing white space, trailing empty lines, C++ comments, etc.
        - split cmd_boot.c (separate cmd_bdinfo.c and cmd_load.c)
      
      * Patches by Kenneth Johansson, 25 Jun 2003:
        - major rework of command structure
          (work done mostly by Michal Cendrowski and Joakim Kristiansen)
      8bde7f77
  19. 25 Jun, 2003 1 commit
    • wdenk's avatar
      * Header file cleanup for ARM · b783edae
      wdenk authored
      * Patch by Murray Jensen, 24 Jun 2003:
        - make sure to use only U-boot provided header files
        - fix problems with ".rodata.str1.4" section as used by GCC-3.x
      b783edae
  20. 30 May, 2003 1 commit
  21. 12 Mar, 2003 1 commit
    • wdenk's avatar
      * Patch by Josef Wagner, 12 Mar 2003: · 3bac3513
      wdenk authored
        - 16/32 MB and 50/80 MHz support with auto-detection for IP860
        - ETH05 and BEDBUG support for CU824
        - added support for MicroSys CPC45
        - new BOOTROM/FLASH0 and DOC base for PM826
      
      * Patch by Robert Schwebel, 12 Mar 2003:
        Fix the chpart command on innokom board
      
      * Name cleanup:
        mv include/asm-i386/ppcboot-i386.h include/asm-i386/u-boot-i386.h
        s/PPCBoot/U-Boot/ in some files
        s/pImage/uImage/  in some files
      
      * Patch by Detlev Zundel, 15 Jan 2003:
        Fix '' command line quoting
      
      * Patch by The LEOX team, 19 Jan 2003:
        - add support for the ELPT860 board
        - add support for Dallas ds164x RTC
      3bac3513
  22. 14 Feb, 2003 1 commit
  23. 03 Nov, 2002 1 commit
  24. 02 Nov, 2002 1 commit
  25. 17 Aug, 2002 1 commit
  26. 14 Aug, 2002 1 commit
  27. 01 Apr, 2002 1 commit
  28. 16 May, 2001 1 commit