1. 13 Sep, 2014 1 commit
  2. 30 Jul, 2014 2 commits
    • Masahiro Yamada's avatar
      Add board MAINTAINERS files · 93d4334f
      Masahiro Yamada authored
      We have switched to Kconfig and the boards.cfg file is going to
      be removed. We have to retrieve the board status and maintainers
      information from it.
      
      The MAINTAINERS format as in Linux Kernel would be nice
      because we can crib the scripts/get_maintainer.pl script.
      
      After some discussion, we chose to put a MAINTAINERS file under each
      board directory, not the top-level one because we want to collect
      relevant information for a board into a single place.
      
      TODO:
      Modify get_maintainer.pl to scan multiple MAINTAINERS files.
      Signed-off-by: default avatarMasahiro Yamada <yamada.m@jp.panasonic.com>
      Suggested-by: default avatarTom Rini <trini@ti.com>
      Acked-by: default avatarSimon Glass <sjg@chromium.org>
      93d4334f
    • Masahiro Yamada's avatar
      kconfig: add board Kconfig and defconfig files · dd84058d
      Masahiro Yamada authored
      This commit adds:
       - arch/${ARCH}/Kconfig
          provide a menu to select target boards
       - board/${VENDOR}/${BOARD}/Kconfig or board/${BOARD}/Kconfig
          set CONFIG macros to the appropriate values for each board
       - configs/${TARGET_BOARD}_defconfig
          default setting of each board
      
      (This commit was automatically generated by a conversion script
      based on boards.cfg)
      
      In Linux Kernel, defconfig files are located under
      arch/${ARCH}/configs/ directory.
      It works in Linux Kernel since ARCH is always given from the
      command line for cross compile.
      
      But in U-Boot, ARCH is not given from the command line.
      Which means we cannot know ARCH until the board configuration is done.
      That is why all the "*_defconfig" files should be gathered into a
      single directory ./configs/.
      Signed-off-by: default avatarMasahiro Yamada <yamada.m@jp.panasonic.com>
      Acked-by: default avatarSimon Glass <sjg@chromium.org>
      dd84058d
  3. 01 Nov, 2013 1 commit
  4. 14 Oct, 2013 1 commit
  5. 24 Jul, 2013 1 commit
  6. 13 Dec, 2012 1 commit
  7. 07 Nov, 2011 2 commits
  8. 15 Oct, 2011 1 commit
  9. 12 May, 2011 1 commit
    • Wolfgang Denk's avatar
      Fix incorrect use of getenv() before relocation · f0c0b3a9
      Wolfgang Denk authored
      A large number of boards incorrectly used getenv() in their board init
      code running before relocation.  In some cases this caused U-Boot to
      hang when certain environment variables grew too long.
      Fix the code to use getenv_r().
      Signed-off-by: default avatarWolfgang Denk <wd@denx.de>
      Cc: Stefan Roese <sr@denx.de>
      Cc: The LEOX team <team@leox.org>
      Cc: Michael Schwingen <michael@schwingen.org>
      Cc: Georg Schardt <schardt@team-ctech.de>
      Cc: Werner Pfister <Pfister_Werner@intercontrol.de>
      Cc: Dirk Eibach <eibach@gdsys.de>
      Cc: Peter De Schrijver <p2@mind.be>
      Cc: John Zhan <zhanz@sinovee.com>
      Cc: Rishi Bhattacharya <rishi@ti.com>
      Cc: Peter Tyser <ptyser@xes-inc.com>
      f0c0b3a9
  10. 17 Nov, 2010 1 commit
    • Sebastien Carlier's avatar
      Switch from archive libraries to partial linking · 6d8962e8
      Sebastien Carlier authored
      Before this commit, weak symbols were not overridden by non-weak symbols
      found in archive libraries when linking with recent versions of
      binutils.  As stated in the System V ABI, "the link editor does not
      extract archive members to resolve undefined weak symbols".
      
      This commit changes all Makefiles to use partial linking (ld -r) instead
      of creating library archives, which forces all symbols to participate in
      linking, allowing non-weak symbols to override weak symbols as intended.
      This approach is also used by Linux, from which the gmake function
      cmd_link_o_target (defined in config.mk and used in all Makefiles) is
      inspired.
      
      The name of each former library archive is preserved except for
      extensions which change from ".a" to ".o".  This commit updates
      references accordingly where needed, in particular in some linker
      scripts.
      
      This commit reveals board configurations that exclude some features but
      include source files that depend these disabled features in the build,
      resulting in undefined symbols.  Known such cases include:
      - disabling CMD_NET but not CMD_NFS;
      - enabling CONFIG_OF_LIBFDT but not CONFIG_QE.
      Signed-off-by: default avatarSebastien Carlier <sebastien.carlier@gmail.com>
      6d8962e8
  11. 18 Oct, 2010 3 commits
  12. 18 Oct, 2008 1 commit
  13. 10 Sep, 2008 3 commits
  14. 02 Jul, 2008 1 commit
  15. 12 Jun, 2008 1 commit
    • Becky Bruce's avatar
      Change initdram() return type to phys_size_t · 9973e3c6
      Becky Bruce authored
      This patch changes the return type of initdram() from long int to phys_size_t.
      This is required for a couple of reasons: long int limits the amount of dram
      to 2GB, and u-boot in general is moving over to phys_size_t to represent the
      size of physical memory.  phys_size_t is defined as an unsigned long on almost
      all current platforms.
      
      This patch *only* changes the return type of the initdram function (in
      include/common.h, as well as in each board's implementation of initdram).  It
      does not actually modify the code inside the function on any of the platforms;
      platforms which wish to support more than 2GB of DRAM will need to modify
      their initdram() function code.
      
      Build tested with MAKEALL for ppc, arm, mips, mips-el. Booted on powerpc
      MPC8641HPCN.
      Signed-off-by: default avatarBecky Bruce <becky.bruce@freescale.com>
      9973e3c6
  16. 03 Jul, 2007 1 commit
  17. 08 Oct, 2006 1 commit
  18. 01 Sep, 2006 1 commit
    • Marian Balakowicz's avatar
      Add support for a saving build objects in a separate directory. · f9328639
      Marian Balakowicz authored
      Modifications are based on the linux kernel approach and
      support two use cases:
      
        1) Add O= to the make command line
        'make O=/tmp/build all'
      
        2) Set environement variable BUILD_DIR to point to the desired location
        'export BUILD_DIR=/tmp/build'
        'make'
      
      The second approach can also be used with a MAKEALL script
      'export BUILD_DIR=/tmp/build'
      './MAKEALL'
      
      Command line 'O=' setting overrides BUILD_DIR environent variable.
      
      When none of the above methods is used the local build is performed and
      the object files are placed in the source directory.
      f9328639
  19. 12 Dec, 2005 1 commit
  20. 13 Oct, 2005 1 commit
  21. 31 Aug, 2005 1 commit
  22. 08 Sep, 2004 1 commit
    • wdenk's avatar
      * Patch by Detlev Zundel, 08 Sep 2004: · eedcd078
      wdenk authored
        Update etags build target
      
      * Improve NetConsole support: add support for broadcast destination
        address and buffered input.
      
      * Cleanup compiler warnings for GCC 3.3.x and later
      
      * Fix problem in cmd_jffs2.c introduced by CFG_JFFS_SINGLE_PART patch
      eedcd078
  23. 12 Feb, 2004 1 commit
    • wdenk's avatar
      * Some code cleanup · bf9e3b38
      wdenk authored
      * Patch by Josef Baumgartner, 10 Feb 2004:
        Fixes for Coldfire port
      
      * Patch by Brad Kemp, 11 Feb 2004:
        Fix CFI flash driver problems
      bf9e3b38
  24. 27 Jun, 2003 1 commit
    • wdenk's avatar
      * Code cleanup: · 8bde7f77
      wdenk authored
        - remove trailing white space, trailing empty lines, C++ comments, etc.
        - split cmd_boot.c (separate cmd_bdinfo.c and cmd_load.c)
      
      * Patches by Kenneth Johansson, 25 Jun 2003:
        - major rework of command structure
          (work done mostly by Michal Cendrowski and Joakim Kristiansen)
      8bde7f77
  25. 25 Jun, 2003 1 commit
    • wdenk's avatar
      * Header file cleanup for ARM · b783edae
      wdenk authored
      * Patch by Murray Jensen, 24 Jun 2003:
        - make sure to use only U-boot provided header files
        - fix problems with ".rodata.str1.4" section as used by GCC-3.x
      b783edae
  26. 30 May, 2003 1 commit
  27. 03 Nov, 2002 1 commit
  28. 28 Dec, 2001 1 commit