1. 13 Sep, 2014 1 commit
  2. 30 Jul, 2014 2 commits
    • Masahiro Yamada's avatar
      Add board MAINTAINERS files · 93d4334f
      Masahiro Yamada authored
      We have switched to Kconfig and the boards.cfg file is going to
      be removed. We have to retrieve the board status and maintainers
      information from it.
      
      The MAINTAINERS format as in Linux Kernel would be nice
      because we can crib the scripts/get_maintainer.pl script.
      
      After some discussion, we chose to put a MAINTAINERS file under each
      board directory, not the top-level one because we want to collect
      relevant information for a board into a single place.
      
      TODO:
      Modify get_maintainer.pl to scan multiple MAINTAINERS files.
      Signed-off-by: default avatarMasahiro Yamada <yamada.m@jp.panasonic.com>
      Suggested-by: default avatarTom Rini <trini@ti.com>
      Acked-by: default avatarSimon Glass <sjg@chromium.org>
      93d4334f
    • Masahiro Yamada's avatar
      kconfig: add board Kconfig and defconfig files · dd84058d
      Masahiro Yamada authored
      This commit adds:
       - arch/${ARCH}/Kconfig
          provide a menu to select target boards
       - board/${VENDOR}/${BOARD}/Kconfig or board/${BOARD}/Kconfig
          set CONFIG macros to the appropriate values for each board
       - configs/${TARGET_BOARD}_defconfig
          default setting of each board
      
      (This commit was automatically generated by a conversion script
      based on boards.cfg)
      
      In Linux Kernel, defconfig files are located under
      arch/${ARCH}/configs/ directory.
      It works in Linux Kernel since ARCH is always given from the
      command line for cross compile.
      
      But in U-Boot, ARCH is not given from the command line.
      Which means we cannot know ARCH until the board configuration is done.
      That is why all the "*_defconfig" files should be gathered into a
      single directory ./configs/.
      Signed-off-by: default avatarMasahiro Yamada <yamada.m@jp.panasonic.com>
      Acked-by: default avatarSimon Glass <sjg@chromium.org>
      dd84058d
  3. 12 Mar, 2014 1 commit
  4. 01 Nov, 2013 1 commit
  5. 14 Oct, 2013 1 commit
  6. 24 Jul, 2013 1 commit
  7. 15 Mar, 2013 1 commit
    • Simon Glass's avatar
      Replace __bss_end__ with __bss_end · 3929fb0a
      Simon Glass authored
      Note this is a tree-wide change affecting multiple architectures.
      
      At present we use __bss_start, but mostly __bss_end__. This seems
      inconsistent and in a number of places __bss_end is used instead.
      
      Change to use __bss_end for the BSS end symbol throughout U-Boot. This
      makes it possible to use the asm-generic/sections.h file on all
      archs.
      Signed-off-by: default avatarSimon Glass <sjg@chromium.org>
      3929fb0a
  8. 12 Mar, 2013 1 commit
    • Albert ARIBAUD's avatar
      Refactor linker-generated arrays · ef123c52
      Albert ARIBAUD authored
      Refactor linker-generated array code so that symbols
      which were previously linker-generated are now compiler-
      generated. This causes relocation records of type
      R_ARM_ABS32 to become R_ARM_RELATIVE, which makes
      code which uses LGA able to run before relocation as
      well as after.
      
      Note: this affects more than ARM targets, as linker-
      lists span possibly all target architectures, notably
      PowerPC.
      
      Conflicts:
      	arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds
      	arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds
      	arch/arm/cpu/armv7/omap-common/u-boot-spl.lds
      	board/ait/cam_enc_4xx/u-boot-spl.lds
      	board/davinci/da8xxevm/u-boot-spl-da850evm.lds
      	board/davinci/da8xxevm/u-boot-spl-hawk.lds
      	board/vpac270/u-boot-spl.lds
      Signed-off-by: default avatarAlbert ARIBAUD <albert.u.boot@aribaud.net>
      ef123c52
  9. 22 Oct, 2012 2 commits
    • Marek Vasut's avatar
      common: Discard the __u_boot_cmd section · 8b493a52
      Marek Vasut authored
      The command declaration now uses the new LG-array method to generate
      list of commands. Thus the __u_boot_cmd section is now superseded and
      redundant and therefore can be removed. Also, remove externed symbols
      associated with this section from include/command.h .
      Signed-off-by: default avatarMarek Vasut <marex@denx.de>
      Cc: Joe Hershberger <joe.hershberger@gmail.com>
      Cc: Mike Frysinger <vapier@gentoo.org>
      8b493a52
    • Marek Vasut's avatar
      common: Add .u_boot_list into all linker files · 55675142
      Marek Vasut authored
      Add section for the linker-generated lists into all possible linker
      files, so that everyone can easily use these lists. This is mostly
      a mechanical adjustment.
      Signed-off-by: default avatarMarek Vasut <marex@denx.de>
      Cc: Joe Hershberger <joe.hershberger@gmail.com>
      Cc: Mike Frysinger <vapier@gentoo.org>
      55675142
  10. 29 Jul, 2012 1 commit
  11. 15 Oct, 2011 1 commit
  12. 27 Mar, 2011 1 commit
  13. 27 Nov, 2010 1 commit
  14. 17 Nov, 2010 1 commit
    • Sebastien Carlier's avatar
      Switch from archive libraries to partial linking · 6d8962e8
      Sebastien Carlier authored
      Before this commit, weak symbols were not overridden by non-weak symbols
      found in archive libraries when linking with recent versions of
      binutils.  As stated in the System V ABI, "the link editor does not
      extract archive members to resolve undefined weak symbols".
      
      This commit changes all Makefiles to use partial linking (ld -r) instead
      of creating library archives, which forces all symbols to participate in
      linking, allowing non-weak symbols to override weak symbols as intended.
      This approach is also used by Linux, from which the gmake function
      cmd_link_o_target (defined in config.mk and used in all Makefiles) is
      inspired.
      
      The name of each former library archive is preserved except for
      extensions which change from ".a" to ".o".  This commit updates
      references accordingly where needed, in particular in some linker
      scripts.
      
      This commit reveals board configurations that exclude some features but
      include source files that depend these disabled features in the build,
      resulting in undefined symbols.  Known such cases include:
      - disabling CMD_NET but not CMD_NFS;
      - enabling CONFIG_OF_LIBFDT but not CONFIG_QE.
      Signed-off-by: default avatarSebastien Carlier <sebastien.carlier@gmail.com>
      6d8962e8
  15. 26 Oct, 2010 1 commit
    • Wolfgang Denk's avatar
      Replace CONFIG_SYS_GBL_DATA_SIZE by auto-generated value · 25ddd1fb
      Wolfgang Denk authored
      CONFIG_SYS_GBL_DATA_SIZE has always been just a bad workarond for not
      being able to use "sizeof(struct global_data)" in assembler files.
      Recent experience has shown that manual synchronization is not
      reliable enough.  This patch renames CONFIG_SYS_GBL_DATA_SIZE into
      GENERATED_GBL_DATA_SIZE which gets automatically generated by the
      asm-offsets tool.  In the result, all definitions of this value can be
      deleted from the board config files.  We have to make sure that all
      files that reference such data include the new <asm-offsets.h> file.
      
      No other changes have been done yet, but it is obvious that similar
      changes / simplifications can be done for other, related macro
      definitions as well.
      Signed-off-by: default avatarWolfgang Denk <wd@denx.de>
      Acked-by: default avatarKumar Gala <galak@kernel.crashing.org>
      25ddd1fb
  16. 18 Oct, 2010 2 commits
    • Wolfgang Denk's avatar
      Makefile: move all Power Architecture boards into boards.cfg · 2ae18241
      Wolfgang Denk authored
      Clean up Makefile, and drop a lot of the config.mk files on the way.
      
      We now also automatically pick all boards that are listed in
      boards.cfg (and with all configurations), so we can drop the redundant
      entries from MAKEALL to avoid building these twice.
      Signed-off-by: default avatarWolfgang Denk <wd@denx.de>
      2ae18241
    • Wolfgang Denk's avatar
      Rename TEXT_BASE into CONFIG_SYS_TEXT_BASE · 14d0a02a
      Wolfgang Denk authored
      The change is currently needed to be able to remove the board
      configuration scripting from the top level Makefile and replace it by
      a simple, table driven script.
      
      Moving this configuration setting into the "CONFIG_*" name space is
      also desirable because it is needed if we ever should move forward to
      a Kconfig driven configuration system.
      Signed-off-by: default avatarWolfgang Denk <wd@denx.de>
      14d0a02a
  17. 23 Sep, 2010 3 commits
  18. 29 Apr, 2010 1 commit
  19. 21 Apr, 2010 1 commit
  20. 19 Apr, 2010 1 commit
    • Stefan Roese's avatar
      ppc4xx: TLB init file cleanup · cf6eb6da
      Stefan Roese authored
      This patch adds new macros, with frequently used combinations of the
      4xx TLB access control and storage attibutes. Additionally the 4xx init.S
      files are updated to make use of these new macros. Resulting in easier
      to read TLB definitions.
      
      Additionally some init.S files are updated to use the mmu header for the
      TLB defines, instead of defining their own macros.
      Signed-off-by: default avatarStefan Roese <sr@denx.de>
      cf6eb6da
  21. 13 Apr, 2010 2 commits
  22. 07 Dec, 2009 1 commit
    • Stefan Roese's avatar
      POST: Remove duplicated post_hotkey_pressed() functions · 39ff7d5f
      Stefan Roese authored
      This patch introduces a weak default function for post_hotkey_pressed(),
      returning 0, for boards without hotkey support. The long-running tests
      won't be started on those boards. This default function was implemented
      in many board directories. By implementing this weak default we can
      remove all those duplicate versions.
      
      Boards with hotkey support, can override this weak default function
      by defining one in their board specific code.
      Signed-off-by: default avatarStefan Roese <sr@denx.de>
      39ff7d5f
  23. 19 Nov, 2009 3 commits
  24. 09 Nov, 2009 1 commit
  25. 02 Nov, 2009 1 commit
  26. 07 Oct, 2009 1 commit
  27. 03 Oct, 2009 2 commits
    • Stefan Roese's avatar
      ppc4xx: Big cleanup of PPC4xx defines · 297a6587
      Stefan Roese authored
      This patch cleans up multiple issues of the 4xx register (mostly
      DCR, SDR, CPR, etc) definitions:
      
      - Change lower case defines to upper case (plb4_acr -> PLB4_ACR)
      - Change the defines to better match the names from the
        user's manuals (e.g. cprpllc -> CPR0_PLLC)
      - Removal of some unused defines
      
      Please test this patch intensive on your PPC4xx platform. Even though
      I tried not to break anything and tested successfully on multiple
      4xx AMCC platforms, testing on custom platforms is recommended.
      Signed-off-by: default avatarStefan Roese <sr@denx.de>
      297a6587
    • Peter Tyser's avatar
      ppc: Enable full relocation to RAM · 85829017
      Peter Tyser authored
      The following changes allow U-Boot to fully relocate from flash to
      RAM:
       - Remove linker scripts' .fixup sections from the .text section
       - Add -mrelocatable to PLATFORM_RELFLAGS for all boards
       - Define CONFIG_RELOC_FIXUP_WORKS for all boards
      
      Previously, U-Boot would partially relocate, but statically initialized
      pointers needed to be manually relocated.
      Signed-off-by: default avatarPeter Tyser <ptyser@xes-inc.com>
      85829017
  28. 28 Sep, 2009 1 commit
  29. 11 Sep, 2009 1 commit
    • Stefan Roese's avatar
      ppc4xx: Big cleanup of PPC4xx defines · d1c3b275
      Stefan Roese authored
      This patch cleans up multiple issues of the 4xx register (mostly
      DCR, SDR, CPR, etc) definitions:
      
      - Change lower case defines to upper case (plb4_acr -> PLB4_ACR)
      - Change the defines to better match the names from the
        user's manuals (e.g. cprpllc -> CPR0_PLLC)
      - Removal of some unused defines
      
      Please test this patch intensive on your PPC4xx platform. Even though
      I tried not to break anything and tested successfully on multiple
      4xx AMCC platforms, testing on custom platforms is recommended.
      Signed-off-by: default avatarStefan Roese <sr@denx.de>
      d1c3b275
  30. 20 Mar, 2009 1 commit
    • Trent Piepho's avatar
      Fix all linker script to handle all rodata sections · f62fb999
      Trent Piepho authored
      A recent gcc added a new unaligned rodata section called '.rodata.str1.1',
      which needs to be added the the linker script.  Instead of just adding this
      one section, we use a wildcard ".rodata*" to get all rodata linker section
      gcc has now and might add in the future.
      
      However, '*(.rodata*)' by itself will result in sub-optimal section
      ordering.  The sections will be sorted by object file, which causes extra
      padding between the unaligned rodata.str.1.1 of one object file and the
      aligned rodata of the next object file.  This is easy to fix by using the
      SORT_BY_ALIGNMENT command.
      
      This patch has not be tested one most of the boards modified.  Some boards
      have a linker script that looks something like this:
      
      *(.text)
      . = ALIGN(16);
      *(.rodata)
      *(.rodata.str1.4)
      *(.eh_frame)
      
      I change this to:
      
      *(.text)
      . = ALIGN(16);
      *(.eh_frame)
      *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
      
      This means the start of rodata will no longer be 16 bytes aligned.
      However, the boundary between text and rodata/eh_frame is still aligned to
      16 bytes, which is what I think the real purpose of the ALIGN call is.
      Signed-off-by: default avatarTrent Piepho <xyzzy@speakeasy.org>
      f62fb999
  31. 29 Jan, 2009 1 commit