1. 15 May, 2012 2 commits
    • Tom Rini's avatar
      omap3: Introduce weak misc_init_r · 8a87a3d7
      Tom Rini authored
      Introduce a __weak misc_init_r function that just runs dieid_num_r().
      Remove misc_init_r from cm_t35, mcx, omap3_logic and mt_ventoux as this was
      all they did for misc_init_r.
      Cc: Igor Grinberg <grinberg@compulab.co.il>
      Cc: Ilya Yanok <yanok@emcraft.com>
      Cc: Peter Barada <peter.barada@logicpd.com>
      Cc: Stefano Babic <sbabic@denx.de>
      Signed-off-by: default avatarTom Rini <trini@ti.com>
      Acked-by: default avatarIgor Grinberg <grinberg@compulab.co.il>
    • Jonathan Solnit's avatar
      ARM:OMAP+:MMC: Add parameters to MMC init · bbbc1ae9
      Jonathan Solnit authored
      Add parameters to the OMAP MMC initialization function so the board can
      mask host capabilities and set the maximum clock frequency.  While the
      OMAP supports a certain set of MMC host capabilities, individual boards
      may be more restricted and the OMAP may need to be configured to match
      the board.  The PRG_SDMMC1_SPEEDCTRL bit in the OMAP3 is an example.
      Signed-off-by: default avatarJonathan Solnit <jsolnit@gmail.com>
  2. 12 Feb, 2012 1 commit
  3. 16 Jan, 2012 1 commit
  4. 06 Dec, 2011 2 commits
  5. 27 Oct, 2011 3 commits
  6. 15 Oct, 2011 1 commit
  7. 30 Sep, 2011 2 commits
  8. 13 Sep, 2011 2 commits
  9. 07 Sep, 2011 1 commit
  10. 04 Sep, 2011 3 commits
  11. 26 Jul, 2011 2 commits
    • Mike Frysinger's avatar
      serial: drop useless ctlr field · 1c9a5606
      Mike Frysinger authored
      The multi serial support has a "ctlr" field which almost no one uses,
      but everyone is forced to set to useless strings.  So punt it.
      Funny enough, the only code that actually reads this field (the mpc8xx
      driver) has a typo where it meant to look for the SCC driver.  Fix it
      while converting the check to use the name field.
      Signed-off-by: default avatarMike Frysinger <vapier@gentoo.org>
      CC: Heiko Schocher <hs@denx.de>
      CC: Anatolij Gustschin <agust@denx.de>
      CC: Tom Rix <Tom.Rix@windriver.com>
      CC: Minkyu Kang <mk7.kang@samsung.com>
      CC: Craig Nauman <cnauman@diagraph.com>
      CC: Marek Vasut <marek.vasut@gmail.com>
      CC: Prafulla Wadaskar <prafulla@marvell.com>
      CC: Mahavir Jain <mjain@marvell.com>
    • Mike Frysinger's avatar
      serial: push default_serial_console to drivers · 6c768ca7
      Mike Frysinger authored
      Rather than sticking arch/board/driver specific logic in the common
      serial code, push it all out to the respective drivers.  The serial
      drivers declare these funcs weak so that boards can still override
      things with their own definition.
      Signed-off-by: default avatarMike Frysinger <vapier@gentoo.org>
      CC: Heiko Schocher <hs@denx.de>
      CC: Anatolij Gustschin <agust@denx.de>
      CC: Tom Rix <Tom.Rix@windriver.com>
      CC: Minkyu Kang <mk7.kang@samsung.com>
      CC: Craig Nauman <cnauman@diagraph.com>
      CC: Prafulla Wadaskar <prafulla@marvell.com>
      CC: Mahavir Jain <mjain@marvell.com>
      Tested-by: default avatarMinkyu Kang <mk7.kang@samsung.com>
  12. 17 Jul, 2011 1 commit
  13. 14 Jul, 2011 1 commit
  14. 07 Jun, 2011 2 commits
  15. 06 Jun, 2011 1 commit
  16. 27 Apr, 2011 1 commit
  17. 21 Dec, 2010 1 commit
  18. 30 Nov, 2010 2 commits
  19. 29 Nov, 2010 1 commit
  20. 17 Nov, 2010 1 commit
    • Sebastien Carlier's avatar
      Switch from archive libraries to partial linking · 6d8962e8
      Sebastien Carlier authored
      Before this commit, weak symbols were not overridden by non-weak symbols
      found in archive libraries when linking with recent versions of
      binutils.  As stated in the System V ABI, "the link editor does not
      extract archive members to resolve undefined weak symbols".
      This commit changes all Makefiles to use partial linking (ld -r) instead
      of creating library archives, which forces all symbols to participate in
      linking, allowing non-weak symbols to override weak symbols as intended.
      This approach is also used by Linux, from which the gmake function
      cmd_link_o_target (defined in config.mk and used in all Makefiles) is
      The name of each former library archive is preserved except for
      extensions which change from ".a" to ".o".  This commit updates
      references accordingly where needed, in particular in some linker
      This commit reveals board configurations that exclude some features but
      include source files that depend these disabled features in the build,
      resulting in undefined symbols.  Known such cases include:
      - disabling CMD_NET but not CMD_NFS;
      - enabling CONFIG_OF_LIBFDT but not CONFIG_QE.
      Signed-off-by: default avatarSebastien Carlier <sebastien.carlier@gmail.com>
  21. 19 Oct, 2010 1 commit
  22. 18 Oct, 2010 1 commit
    • Wolfgang Denk's avatar
      Rename TEXT_BASE into CONFIG_SYS_TEXT_BASE · 14d0a02a
      Wolfgang Denk authored
      The change is currently needed to be able to remove the board
      configuration scripting from the top level Makefile and replace it by
      a simple, table driven script.
      Moving this configuration setting into the "CONFIG_*" name space is
      also desirable because it is needed if we ever should move forward to
      a Kconfig driven configuration system.
      Signed-off-by: default avatarWolfgang Denk <wd@denx.de>
  23. 13 Oct, 2010 1 commit
  24. 19 Sep, 2010 1 commit
    • Heiko Schocher's avatar
      ARM: implement relocation for ARM926 · ab86f72c
      Heiko Schocher authored
      Change the implementation for arm926 to relocate the code to
      an arbitrary address in RAM.
      Adapt the TX25 (i.MX25), magnesium board to test the changes.
      On the tx25 board TEXT_BASE is set to the final relocation
      address to prevent one more copying of u-boot code
      when relocating. More info see:
      da850 board:
      Tested-by: default avatarBen Gardiner <bengardiner@nanometrics.ca>
      Portions of this work were supported by funding from
      the CE Linux Forum.
      Signed-off-by: default avatarHeiko Schocher <hs@denx.de>
      Cc: Ben Gardiner <bengardiner@nanometrics.ca>
  25. 05 Jul, 2010 1 commit
  26. 08 Jun, 2010 1 commit
  27. 07 Jun, 2010 1 commit
  28. 30 Apr, 2010 1 commit
  29. 24 Apr, 2010 1 commit
    • Anatolij Gustschin's avatar
      serial: struct serial_device: add uninit() entry for drivers · fbb0030e
      Anatolij Gustschin authored
      Subsequent patch extends mpc512x serial driver to support
      multiple PSC ports. The driver will provide an uninit()
      function to stop the serial controller and to disable the
      controller's clock. Adding uninit() entry to struct serial_device
      allows disabling the serial controller after usage of
      a stdio serial device.
      This patch adds uninit() entry to the struct serial_device
      and fixes initialization of this structure in the code
      Signed-off-by: default avatarAnatolij Gustschin <agust@denx.de>