1. 14 Mar, 2016 1 commit
  2. 25 Nov, 2015 2 commits
  3. 22 Nov, 2015 1 commit
  4. 21 Aug, 2015 1 commit
  5. 26 Jun, 2015 2 commits
  6. 01 Jun, 2015 2 commits
  7. 12 May, 2015 1 commit
  8. 04 May, 2015 1 commit
    • Shengzhou Liu's avatar
      powerpc/t1023rdb: Add T1023 RDB board support · e8a7f1c3
      Shengzhou Liu authored
      T1023RDB is a Freescale Reference Design Board that hosts the T1023 SoC.
      
      T1023RDB board Overview
      -----------------------
      - T1023 SoC integrating two 64-bit e5500 cores up to 1.4GHz
      - CoreNet fabric supporting coherent and noncoherent transactions with
        prioritization and bandwidth allocation
      - Memory: 2GB Micron MT40A512M8HX unbuffered 32-bit fixed DDR4 without ECC
      - Accelerator: DPAA components consist of FMan, BMan, QMan, DCE and SEC
      - Ethernet interfaces:
        - one 1G RGMII port on-board(RTL8211F PHY)
        - one 1G SGMII port on-board(RTL8211F PHY)
        - one 2.5G SGMII port on-board(AQR105 PHY)
      - PCIe: Two Mini-PCIe connectors on-board.
      - SerDes: 4 lanes up to 10.3125GHz
      - NOR:  128MB S29GL01GS110TFIV10 Spansion NOR Flash
      - NAND: 512MB S34MS04G200BFI000 Spansion NAND Flash
      - eSPI: 64MB S25FL512SAGMFI010 Spansion SPI flash.
      - USB: one Type-A USB 2.0 port with internal PHY
      - eSDHC: support SD/MMC card and eMMC on-board
      - 256Kbit M24256 I2C EEPROM
      - RTC: Real-time clock DS1339 on I2C bus
      - UART: one serial port on-board with RJ45 connector
      - Debugging: JTAG/COP for T1023 debugging
      
      As well updated T1024RDB to add T1023RDB.
      Signed-off-by: 's avatarShengzhou Liu <Shengzhou.Liu@freescale.com>
      [York Sun: fix defconfig files]
      Reviewed-by: 's avatarYork Sun <yorksun@freescale.com>
      e8a7f1c3
  9. 15 Mar, 2015 1 commit
  10. 05 Dec, 2014 2 commits
    • Shengzhou Liu's avatar
      powerpc/t1024rdb: Add T1024 RDB board support · 48c6f328
      Shengzhou Liu authored
      T1024RDB is a Freescale Reference Design Board that hosts the T1024 SoC.
      
      T1024RDB board Overview
      -----------------------
      - T1024 SoC integrating two 64-bit e5500 cores up to 1.4GHz
      - CoreNet fabric supporting coherent and noncoherent transactions with
        prioritization and bandwidth allocation
      - 32-/64-bit DDR3L SDRAM memory controller with ECC and interleaving support
      - Accelerator: DPAA components consist of FMan, BMan, QMan, DCE and SEC
      - Ethernet interfaces:
        - Two 10M/100M/1G RGMII ports on-board
        - one 10Gbps XFI interface
      - PCIe: Three PCIe controllers: one PCIe Slot and two Mini-PCIe connectors.
      - SerDes: 4 lanes up to 10.3125GHz
      - IFC: 128MB NOR Flash, 512MB NAND Flash and CPLD
      - eSPI: 64MB N25Q512 SPI flash.
      - Deep Sleep power implementaion (wakeup from GPIO/Timer/Ethernet/USB)
      - USB: Two  Type-A USB2.0 ports with internal PHY
      - eSDHC: Support SD, SDHC, SDXC and MMC/eMMC
      - I2C: Four I2C controllers
      - UART: Two UART serial ports
      Signed-off-by: 's avatarShengzhou Liu <Shengzhou.Liu@freescale.com>
      [York Sun: Fix ft_board_setup() type, fix MAINTAINERS for SECURE_BOOT
      	   Fix Kconfig by adding SUPPORT_SPL]
      Reviewed-by: 's avatarYork Sun <yorksun@freescale.com>
      48c6f328
    • Shengzhou Liu's avatar
      powerpc/t1024qds: Add T1024 QDS board support · aba80048
      Shengzhou Liu authored
      T1024QDS is a high-performance computing evaluation, development and
      test platform for T1024 QorIQ Power Architecture processor.
      
      T1024QDS board Overview
      -----------------------
      - T1024 SoC integrating two 64-bit e5500 cores up to 1.4GHz
      - CoreNet fabric supporting coherent and noncoherent transactions with
        prioritization and bandwidth allocation
      - 32-/64-bit DDR3L/DDR4 SDRAM memory controller with ECC and interleaving support
      - Accelerator: DPAA components consist of FMan, BMan, QMan, DCE and SEC
      - Ethernet interfaces:
        - Two 10M/100M/1G RGMII ports on-board
        - Three 1G/2.5Gbps SGMII ports
        - Four 1Gbps QSGMII ports
        - one 10Gbps XFI or 10Base-KR interface
      - SerDes: 4 lanes up to 10.3125GHz Supporting SGMII/QSGMII, XFI, PCIe, SATA and Aurora
      - PCIe: Three PCI Express controllers with five PCIe slots.
      - IFC: 128MB NOR Flash, 2GB NAND Flash, PromJet debug port and Qixis FPGA
      - Video: DIU supports video up to 1280x1024x32 bpp.
        - Chrontel CH7201 for HDMI connection.
        - TI DS90C387R for direct LCD connection.
        - Raw (not encoded) video connector for testing or other encoders.
      - QUICC Engine block
        - 32-bit RISC controller for flexible support of the communications peripherals
        - Serial DMA channel for receive and transmit on all serial channels
        - Two universal communication controllers, supporting TDM, HDLC, and UART
      - Deep Sleep power implementaion (wakeup from GPIO/Timer/Ethernet/USB)
      - eSPI: Three SPI flash devices.
      - SATA: one SATA 2.O.
      - USB: Two USB2.0 ports with internal PHY (one Type-A + one micro Type mini-AB)
      - eSDHC: Support SD, SDHC, SDXC and MMC/eMMC.
      - I2C: Four I2C controllers.
      - UART: Two UART on board.
      Signed-off-by: 's avatarShengzhou Liu <Shengzhou.Liu@freescale.com>
      [York Sun: Fix ft_board_setup() type, fix MAINTAINERS for SECURE_BOOT
      	   Fix Kconfig by adding SUPPORT_SPL]
      Reviewed-by: 's avatarYork Sun <yorksun@freescale.com>
      aba80048