1. 14 Mar, 2016 1 commit
  2. 25 Nov, 2015 1 commit
  3. 18 Nov, 2015 1 commit
  4. 02 Sep, 2015 1 commit
    • Peng Fan's avatar
      imx: mx6 move TARGET_xx Kconfig option to mx6 specific Kconfig file · 21782828
      Peng Fan authored
      Move TARGET_xx Kconfig option based on mx6 to arch/arm/cpu/armv7/mx6/Kconfig.
      Add enable "CONFIG_ARCH_MX6" for boards based on mx6.
      Then we can choose target boards using "make ARCH=arm menuconfig"
      with ARCH_MX6 defined.
      
      If using original way, we have no chance to enable ARCH_MX6 when
      "make menuconfig". Even define CONFIG_ARCH_MX6=y in xx_defconfig,
      kconfig will complains "arch/../configs/platinum_titanium_defconfig:3:
      warning: override: TARGET_PLATINUM_TITANIUM changes choice state"
      Signed-off-by: 's avatarPeng Fan <Peng.Fan@freescale.com>
      Cc: Stefano Babic <sbabic@denx.de>
      Cc: Heiko Schocher <hs@denx.de>
      Cc: Tim Harvey <tharvey@gateworks.com>
      Cc: Eric Bénard <eric@eukrea.com>
      Cc: Fabio Estevam <fabio.estevam@freescale.com>
      Cc: Eric Nelson <eric.nelson@boundarydevices.com>
      Cc: Marek Vasut <marex@denx.de>
      Cc: Christian Gmeiner <christian.gmeiner@gmail.com>
      Cc: Stefan Roese <sr@denx.de>
      Cc: Soeren Moch <smoch@web.de>
      Cc: Otavio Salvador <otavio@ossystems.com.br>
      Acked-by: 's avatarStefano Babic <sbabic@denx.de>
      Acked-by: 's avatarSoeren Moch <smoch@web.de>
      Acked-by: 's avatarOtavio Salvador <otavio@ossystems.com.br>
      Acked-by: 's avatarChristian Gmeiner <christian.gmeiner@gmail.com>
      21782828
  5. 02 Aug, 2015 1 commit
    • Peng Fan's avatar
      imx: mx6qpsabreauto: Add MX6QP SABREAUTO CPU3 board support · 361b715b
      Peng Fan authored
      1. Add DDR script for mx6qpsabreauto board.
      2. On CPU3 board, enet RGMII tx clock is from internal PLL. Set the GPR5[9]
         and init the enet pll output to 125Mhz.
      3. On CPU3 board, SW1ABC=VDDSOC_IN, SW2=VDDARM_IN.
      
      Build target: mx6qpsabreauto_config
      
      Boot Log:
      U-Boot 2015.07-rc2-00071-gfd985ff (Jun 29 2015 - 22:10:55 +0800)
      
      CPU:   Freescale i.MX6QP rev1.0 996 MHz (running at 792 MHz)
      CPU:   Automotive temperature grade (-40C to 125C) at 34C
      Reset cause: POR
      Board: MX6Q-Sabreauto revA
      I2C:   ready
      DRAM:  2 GiB
      PMIC:  PFUZE100 ID=0x10
      Flash: 32 MiB
      NAND:  0 MiB
      MMC:   FSL_SDHC: 0
      *** Warning - bad CRC, using default environment
      
      No panel detected: default to HDMI
      Display: HDMI (1024x768)
      In:    serial
      Out:   serial
      Err:   serial
      Net:   FEC [PRIME]
      Hit any key to stop autoboot:  0
      
      Note:
      In this patch, we still add a new config mx6qpsabreauto_config,
      since SPL is not supported now, and IMX_CONFIG is needed at
      build time, so add this config. Future, when SPL is converted,
      this config can be removed.
      Signed-off-by: 's avatarPeng Fan <Peng.Fan@freescale.com>
      Signed-off-by: 's avatarRobin Gong <b38343@freescale.com>
      Signed-off-by: 's avatarYe.Li <B37916@freescale.com>
      Reviewed-by: 's avatarFabio Estevam <fabio.estevam@freescale.com>
      361b715b
  6. 26 Jun, 2015 2 commits
  7. 01 Jun, 2015 2 commits
  8. 12 May, 2015 1 commit
  9. 18 Apr, 2015 1 commit
  10. 28 Mar, 2015 2 commits
  11. 13 Feb, 2015 1 commit
  12. 12 Feb, 2015 1 commit
  13. 30 Jul, 2014 1 commit
    • Masahiro Yamada's avatar
      kconfig: add board Kconfig and defconfig files · dd84058d
      Masahiro Yamada authored
      This commit adds:
       - arch/${ARCH}/Kconfig
          provide a menu to select target boards
       - board/${VENDOR}/${BOARD}/Kconfig or board/${BOARD}/Kconfig
          set CONFIG macros to the appropriate values for each board
       - configs/${TARGET_BOARD}_defconfig
          default setting of each board
      
      (This commit was automatically generated by a conversion script
      based on boards.cfg)
      
      In Linux Kernel, defconfig files are located under
      arch/${ARCH}/configs/ directory.
      It works in Linux Kernel since ARCH is always given from the
      command line for cross compile.
      
      But in U-Boot, ARCH is not given from the command line.
      Which means we cannot know ARCH until the board configuration is done.
      That is why all the "*_defconfig" files should be gathered into a
      single directory ./configs/.
      Signed-off-by: 's avatarMasahiro Yamada <yamada.m@jp.panasonic.com>
      Acked-by: 's avatarSimon Glass <sjg@chromium.org>
      dd84058d