1. 05 Apr, 2017 2 commits
  2. 25 Jan, 2017 1 commit
  3. 24 Jan, 2017 1 commit
  4. 21 Jan, 2017 1 commit
  5. 17 Jan, 2017 1 commit
  6. 16 Dec, 2016 2 commits
    • Peng Fan's avatar
      imx: mx6sllevk: add plugin support · 8e1d92fd
      Peng Fan authored
      Add plugin support for mx6sllevk board.
      Signed-off-by: 's avatarPeng Fan <peng.fan@nxp.com>
      Cc: Stefano Babic <sbabic@denx.de>
      8e1d92fd
    • Peng Fan's avatar
      arm: imx: add i.MX6SLL EVK board support · 47f73504
      Peng Fan authored
      Add i.MX6SLL EVK board support.
      1. Add imx6sll-evk device tree.
      2. Enable SDHC/I2C/UART.
      3. Enable REGULATOR/PMIC/I2C/GPIO/SDHC/PINCTRL driver.
      
      Boot Log:
      U-Boot 2016.11-00127-gc635871-dirty (Nov 24 2016 - 13:28:19 +0800)
      
      CPU:   Freescale i.MX6SLL rev1.0 at 792MHz
      CPU:   Commercial temperature grade (0C to 95C)Reset cause: POR
      Model: Freescale i.MX6SLL EVK Board
      Board: MX6SLL EVK
      DRAM:  2 GiB
      i2c bus 0 at 35258368, no gpio pinctrl state.
      PMIC: PFUZE100! DEV_ID=0x10 REV_ID=0x21
      MMC:   FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2
      In:    serial
      Out:   serial
      Err:   serial
      Net:   CPU Net Initialization Failed
      No ethernet found.
      Hit any key to stop autoboot:  0
      Signed-off-by: 's avatarPeng Fan <peng.fan@nxp.com>
      Cc: Stefano Babic <sbabic@denx.de>
      47f73504
  7. 11 Oct, 2016 2 commits
  8. 04 Oct, 2016 1 commit
    • Peng Fan's avatar
      arm: imx: add i.MX6ULL 14x14 EVK board support · 55a42b33
      Peng Fan authored
      Add i.MX6ULL EVK board support:
      Add device tree file, which is copied from NXP Linux.
      Enabled DM_MMC, DM_GPIO, DM_I2C, DM_SPI, PINCTRL, DM_REGULATOR.
      The uart iomux settings are still keeped in board file.
      
      Boot Log:
      U-Boot 2016.09-rc1-00366-gbb419ef-dirty (Aug 11 2016 - 13:08:58 +0800)
      
      CPU:   Freescale i.MX6ULL rev1.0 at 396MHz
      CPU:   Commercial temperature grade (0C to 95C) at 15C
      Reset cause: POR
      Model: Freescale i.MX6 ULL 14x14 EVK Board
      Board: MX6ULL 14x14 EVK
      DRAM:  512 MiB
      MMC:   initialized IMX pinctrl driver
      FSL_SDHC: 0, FSL_SDHC: 1
      In:    serial
      Out:   serial
      Err:   serial
      Net:   CPU Net Initialization Failed
      No ethernet found.
      Hit any key to stop autoboot:  0
      => mmc dev 1
      switch to partitions #0, OK
      mmc1 is current device
      Signed-off-by: 's avatarPeng Fan <peng.fan@nxp.com>
      Cc: Stefano Babic <sbabic@denx.de>
      55a42b33