1. 14 Jan, 2011 10 commits
  2. 11 Jan, 2011 1 commit
  3. 10 Jan, 2011 1 commit
  4. 09 Jan, 2011 2 commits
  5. 06 Jan, 2011 1 commit
  6. 11 Jan, 2011 2 commits
  7. 21 Dec, 2010 1 commit
  8. 18 Dec, 2010 1 commit
    • Dirk Behme's avatar
      OMAP3: EVM: Convert omap3_evm_version to u32 · b606ef41
      Dirk Behme authored
      Convert the variable omap3_evm_version to u32 to work around
      some broken linkers from older tool chains. E.g. CodeSourcery's
      2009q1-203 ld 2.19.51.20090205. Without this, these linkers
      stop linking 'omap3_evm' or at least issue a warning. Like
      
      arm-none-linux-gnueabi-ld: section .bss [8003f5e0 -> 8007e337] overlaps section .rel.dyn [8003f5e0 -> 80044e57]
      arm-none-linux-gnueabi-ld: section .dynsym [80044e58 -> 80044ef7] overlaps section.bss [8003f5e0 -> 8007e337]
      arm-none-linux-gnueabi-ld: u-boot: section .bss vma 0x8003f5e0 overlaps previous sections
      
      CC: Sanjeev Premi <premi@ti.com>
      Signed-off-by: default avatarDirk Behme <dirk.behme@googlemail.com>
      b606ef41
  9. 17 Dec, 2010 6 commits
  10. 16 Dec, 2010 5 commits
  11. 15 Dec, 2010 1 commit
  12. 13 Dec, 2010 1 commit
    • Timur Tabi's avatar
      p1022ds: fix switching of DIU/LBC signals · fdb9482b
      Timur Tabi authored
      On the P1022, the pins which drive the video display (DIU) are muxed with the
      local bus controller (LBC), so if the DIU is active, the pins need to be
      temporarily muxed to LBC whenever accessing NOR flash.
      
      The code which handled this transition is checking and changing the wrong
      bits in PMUXCR.
      
      Also add a follow-up read after a write to NOR flash if we're going to
      mux back to DIU after the write, as described in the P1022 RM.
      Signed-off-by: default avatarTimur Tabi <timur@freescale.com>
      Signed-off-by: default avatarKumar Gala <galak@kernel.crashing.org>
      fdb9482b
  13. 11 Dec, 2010 1 commit
  14. 09 Dec, 2010 7 commits
    • Wolfgang Denk's avatar
      Move LDSCRIPT definitions to board config files. · 2ced53e1
      Wolfgang Denk authored
      Recent cleanup actions resulted in a number of config.mk files that
      contained only LDSCRIPT definitions.  Move these into th respective
      board config files and remove the now empty config.mk files.
      Signed-off-by: default avatarWolfgang Denk <wd@denx.de>
      Cc: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
      Cc: Detlev Zundel <dzu@denx.de>
      Cc: Heiko Schocher <hs@denx.de>
      Cc: Andre Schwarz <andre.schwarz@matrix-vision.de>
      Cc: Peter De Schrijver <p2@mind.be>
      Acked-by: Detlev Zundel < dzu@denx.de>
      Acked-by: default avatarAndre Schwarz <andre.schwarz@matrix-vision.de>
      Acked-by: Heiko Schocher<hs@denx.de>
      Acked-by: default avatarMatthias Fuchs <matthias.fuchs@esd.eu>
      2ced53e1
    • Wolfgang Denk's avatar
      Remove redundant config.mk files · 263d5c2f
      Wolfgang Denk authored
      Recent cleanup actions resulted in a number of config.mk files that
      contained only redundant entries like
      
      	PLATFORM_CPPFLAGS += -I$(TOPDIR)
      
      or settings of variables that were not used anywhere in the code, like
      
      	TEXT_END  = 0xfe080000
      
      Remove these unnecessary files.
      Signed-off-by: default avatarWolfgang Denk <wd@denx.de>
      Cc: Scott McNutt <smcnutt@psyent.com>
      Cc: Wolfgang Wegner <w.wegner@astro-kom.de>
      Cc: Josef Wagner <Wagner@Microsys.de>
      Cc: Tolunay Orkun <torkun@nextio.com>
      Cc: Frank Panno <fpanno@delphintech.com>
      Cc: Heiko Schocher <hs@denx.de>
      Cc: Brad Kemp <Brad.Kemp@seranoa.com>
      Acked-by: Heiko Schocher<hs@denx.de>
      263d5c2f
    • Stefano Babic's avatar
      Davinci: add support for the ea20 board · 76bfe76b
      Stefano Babic authored
      This board uses the OMAP-L138 SOM stacked on a
      custom baseboard. It supports SPI Flash, Ethernet
      with RMII.
      Signed-off-by: default avatarStefano Babic <sbabic@denx.de>
      Signed-off-by: default avatarBen Gardiner <bengardiner@nanometrics.ca>
      Signed-off-by: default avatarSandeep Paulraj <s-paulraj@ti.com>
      76bfe76b
    • Stefano Babic's avatar
      Davinci 8xx: Move common functions to share code · a2f2eb76
      Stefano Babic authored
      As more Davinci 8xx board can be added, move common code
      to be shared between boards.
      
       * rebased ontop of Sugosh's patches
       * moving the HAWKBOARD_KICK{0,1}_UNLOCK defines to
         arch/arm/include/asm/arch-davinci/davinci_misc.h from to
         arch/arm/include/asm/arch-davinci/da8xx_common.h
       * don't define dram functions in PRELOADER
       * move sync_env_enetaddr into existing EMAC ifdef
       * use misc.c in hawkboard nand_spl
      Signed-off-by: default avatarBen Gardiner <bengardiner@nanometrics.ca>
      Signed-off-by: default avatarStefano Babic <sbabic@denx.de>
      Signed-off-by: default avatarSandeep Paulraj <s-paulraj@ti.com>
      a2f2eb76
    • Sudhakar Rajashekhara's avatar
      da850: Add RMII support for EMAC · df48676a
      Sudhakar Rajashekhara authored
      This patch is a port of the work by Sudhakar Rajeshekhara in commit
      ab3effbcad8851cc65dc5241a01c064d2030a3b2 of
      git://arago-project.org/git/people/sandeep/u-boot-davinci.git.
      
      The da850 UI board has on it an RMII PHY which can be used if the MDC line
      to the MII PHY on the baseboard is disabled and the RMII PHY is enabled by
      configuring the values of some GPIO pins on the IO expander of the UI board.
      This patch implements disabling that line via GPIO2[6], configuring the UI
      board's IO expander and setting only the pinmux settings that are needed for
      RMII operation.
      
      Tested on da850evm by adding a define for CONFIG_DRIVER_TI_EMAC_USE_RMII.
      Signed-off-by: default avatarSudhakar Rajashekhara <sudhakar.raj@ti.com>
      Signed-off-by: default avatarBen Gardiner <bengardiner@nanometrics.ca>
      CC: Sandeep Paulraj <s-paulraj@ti.com>
      CC: Ben Warren <biggerbadderben@gmail.com>
      CC: Mike Frysinger <vapier@gentoo.org>
      CC: Sughosh Ganu <urwithsughosh@gmail.com>
      Signed-off-by: default avatarSandeep Paulraj <s-paulraj@ti.com>
      df48676a
    • Sughosh Ganu's avatar
      Add board support for hawkboard · dfddb5e6
      Sughosh Ganu authored
      The patch adds basic board support for TI's OMAP-L138 based
      Hawkboard. This board is pretty similar to the da850 EVM. Support for
      nand and network access is added in this version.
      
      The following bootup procedure is used.
      
      At reset, the Rom Boot Loader(RBL), initialises the ddr and the nand
      controllers and copies the second stage bootloader(nand_spl) to
      RAM. The secondary bootloader then copies u-boot from a predefined
      location in the nand flash to the RAM, and passes control to the
      u-boot image.
      
      Three config options are supported
      * hawkboard_config - Used to create the u-boot.bin. Tftp the
       u-boot.bin image to the RAM from u-boot, and flash to the nand flash
       at address 0xe0000.
      
      * hawkboard_nand_config - Used to generate the secondary
       bootloader(nand_spl) image. This creates an elf file u-boot-spl
       under nand_spl/. Create an AIS signed image using this file, and
       flash it to the nand flash at address 0x20000. The ais file should
       fit in one block.
      
      * hawkboard_uart_config - This is same as the first image, but with
       the TEXT_BASE as expected by the RBL(0xc1080000). Create the AIS
      Signed-off-by: default avatarSughosh Ganu <urwithsughosh@gmail.com>
      Signed-off-by: default avatarBen Gardiner <bengardiner@nanometrics.ca>
      Signed-off-by: default avatarSandeep Paulraj <s-paulraj@ti.com>
      dfddb5e6
    • Sughosh Ganu's avatar
      Remove board_init_f function from nand_boot.c · 3258dcae
      Sughosh Ganu authored
      Remove the board_init_f function from nand_spl/nand_boot.c. This
       function is to be defined by all boards using the nand_spl
       functionality in their individual board directory.
      
       Currently this function was being used by the smdk6400 board. Added
       the board specific function definition.
      Signed-off-by: default avatarSughosh Ganu <urwithsughosh@gmail.com>
      Acked-by: default avatarScott Wood <scottwood@freescale.com>
      Signed-off-by: default avatarSandeep Paulraj <s-paulraj@ti.com>
      3258dcae