1. 12 Feb, 2015 1 commit
  2. 30 Jan, 2015 3 commits
  3. 06 Jan, 2015 1 commit
  4. 21 Nov, 2014 1 commit
  5. 24 Oct, 2014 3 commits
  6. 22 Oct, 2014 3 commits
  7. 23 Jul, 2014 8 commits
    • Simon Glass's avatar
      dm: Add child_pre_probe() and child_post_remove() methods · a327dee0
      Simon Glass authored
      Some devices (particularly bus devices) must track their children, knowing
      when a new child is added so that it can be set up for communication on the
      bus.
      
      Add a child_pre_probe() method to provide this feature, and a corresponding
      child_post_remove() method.
      Signed-off-by: default avatarSimon Glass <sjg@chromium.org>
      a327dee0
    • Simon Glass's avatar
      dm: Introduce per-child data for devices · e59f458d
      Simon Glass authored
      Some device types can have child devices and want to store information
      about them. For example a USB flash stick attached to a USB host
      controller would likely use this space. The controller can hold
      information about the USB state of each of its children.
      
      The data is stored attached to the child device in the 'parent_priv'
      member. It can be auto-allocated by dm when the child is probed. To
      do this, add a per_child_auto_alloc_size value to the parent driver.
      Signed-off-by: default avatarSimon Glass <sjg@chromium.org>
      e59f458d
    • Simon Glass's avatar
      dm: Add functions to access a device's children · 997c87bb
      Simon Glass authored
      Devices can have childen that can be addressed by a simple index, the
      sequence number or a device tree offset. Add functions to access a child
      in each of these ways.
      
      The index is typically used as a fallback when the sequence number is not
      available. For example we may use a serial UART with sequence number 0 as
      the console, but if no UART has sequence number 0, then we can fall back
      to just using the first UART (index 0).
      
      The device tree offset function is useful for buses, where they want to
      locate one of their children. The device tree can be scanned to find the
      offset of each child, and that offset can then find the device.
      Signed-off-by: default avatarSimon Glass <sjg@chromium.org>
      997c87bb
    • Simon Glass's avatar
      dm: Provide a function to scan child FDT nodes · 1ca7e206
      Simon Glass authored
      At present only root nodes in the device tree are scanned for devices.
      But some devices can have children. For example a SPI bus may have
      several children for each of its chip selects.
      
      Add a function which scans subnodes and binds devices for each one. This
      can be used for the root node scan also, so change it.
      
      A device can call this function in its bind() or probe() methods to bind
      its children.
      Signed-off-by: default avatarSimon Glass <sjg@chromium.org>
      1ca7e206
    • Simon Glass's avatar
      dm: Avoid accessing uclasses before they are ready · c910e2e2
      Simon Glass authored
      Don't allow access to uclasses before they have been initialised.
      Signed-off-by: default avatarSimon Glass <sjg@chromium.org>
      c910e2e2
    • Simon Glass's avatar
      dm: Allow a device to be found by its FDT offset · f4cdead2
      Simon Glass authored
      Each device that was bound from a device tree has an node that caused it to
      be bound. Add functions that find and return a device based on a device tree
      offset.
      Signed-off-by: default avatarSimon Glass <sjg@chromium.org>
      f4cdead2
    • Simon Glass's avatar
      dm: Introduce device sequence numbering · 5a66a8ff
      Simon Glass authored
      In U-Boot it is pretty common to number devices from 0 and access them
      on the command line using this numbering. While it may come to pass that
      we will move away from this numbering, the possibility seems remote at
      present.
      
      Given that devices within a uclass will have an implied numbering, it
      makes sense to build this into driver model as a core feature. The cost
      is fairly small in terms of code and data space.
      
      With each uclass having numbered devices we can ask for SPI port 0 or
      serial port 1 and receive a single device.
      
      Devices typically request a sequence number using aliases in the device
      tree. These are resolved when the device is probed, to deal with conflicts.
      Sequence numbers need not be sequential and holes are permitted.
      
      At present there is no support for sequence numbers using static platform
      data. It could easily be added to 'struct driver_info' if needed, but it
      seems better to add features as we find a use for them, and the use of -1
      to mean 'no sequence' makes the default value somewhat painful.
      Signed-off-by: default avatarSimon Glass <sjg@chromium.org>
      5a66a8ff
    • Simon Glass's avatar
      dm: Allow drivers to be marked 'before relocation' · 00606d7e
      Simon Glass authored
      Driver model currently only operates after relocation is complete. In this
      state U-Boot typically has a small amount of memory available. In adding
      support for driver model prior to relocation we must try to use as little
      memory as possible.
      
      In addition, on some machines the memory has not be inited and/or the CPU
      is not running at full speed or the data cache is off. These can reduce
      execution performance, so the less initialisation that is done before
      relocation the better.
      
      An immediately-obvious improvement is to only initialise drivers which are
      actually going to be used before relocation. On many boards the only such
      driver is a serial UART, so this provides a very large potential benefit.
      
      Allow drivers to mark themselves as 'pre-reloc' which means that they will
      be initialised prior to relocation. This can be done either with a driver
      flag or with a 'dm,pre-reloc' device tree property.
      
      To support this, the various dm scanning function now take a 'pre_reloc_only'
      parameter which indicates that only drivers marked pre-reloc should be
      bound.
      Signed-off-by: default avatarSimon Glass <sjg@chromium.org>
      00606d7e
  8. 20 Jun, 2014 2 commits
  9. 11 Jun, 2014 1 commit
  10. 27 May, 2014 1 commit
    • Heiko Schocher's avatar
      dm: rename device struct to udevice · 54c5d08a
      Heiko Schocher authored
      using UBI and DM together leads in compiler error, as
      both define a "struct device", so rename "struct device"
      in include/dm/device.h to "struct udevice", as we use
      linux code (MTD/UBI/UBIFS some USB code,...) and cannot
      change the linux "struct device"
      Signed-off-by: default avatarHeiko Schocher <hs@denx.de>
      Cc: Simon Glass <sjg@chromium.org>
      Cc: Marek Vasut <marex@denx.de>
      54c5d08a
  11. 04 Mar, 2014 2 commits
  12. 06 Feb, 2014 2 commits
  13. 08 Nov, 2013 3 commits
  14. 14 Oct, 2013 2 commits
  15. 19 Sep, 2013 2 commits
  16. 24 Jul, 2013 1 commit
    • Gabor Juhos's avatar
      block: constify sect_buf argument of ide_write_data · c575180b
      Gabor Juhos authored
      Add a const keyword to the sect_buf argument of
      ide_write_data to fix the following warning:
      
        cmd_ide.c: In function '__ide_output_data':
        cmd_ide.c:548: warning: passing argument 2 of 'ide_write_data' discards qualifiers from pointer target type
        /devel/u-boot.git/include/ide.h:76: note: expected 'ulong *' but argument is of type 'const ulong *'
      
      Also modify the driver-model documentation to
      match with the new prototype.
      
      Compile tested only.
      
      Cc: Macpaul Lin <macpaul@andestech.com>
      Signed-off-by: default avatarGabor Juhos <juhosg@openwrt.org>
      c575180b
  17. 15 May, 2013 1 commit
  18. 12 Apr, 2013 1 commit
  19. 11 Mar, 2013 1 commit
  20. 28 Feb, 2013 1 commit