1. 18 Apr, 2014 1 commit
  2. 11 Nov, 2013 1 commit
    • Wolfgang Denk's avatar
      MPC824x: remove obsolete "PN62" board · 649acfe1
      Wolfgang Denk authored
      The MPC824x processors have long reached EOL, and the PN62 board has
      not seen any board-specific updates for more than a decade.  It is now
      causing build issues.  Instead of wasting time on things nobody is
      interested in any more, we rather drop this board.
      Signed-off-by: default avatarWolfgang Denk <wd@denx.de>
      Cc: Wolfgang Grandegger <wg@grandegger.com>
      cc: Tom Rini <trini@ti.com>
  3. 22 Jun, 2013 1 commit
    • Mike Dunn's avatar
      pxa: add support for palmtreo680 board · 0dc0e846
      Mike Dunn authored
      This patch adds support for the Palm Treo 680 smartphone.  A quick overview of
      u-boot implementation on the treo 680...
      The treo 680 has a Diskonchip G4 nand flash chip.  This device has a 2k region
      that maps to the system bus at the reset vector in a NOR-like fashion so that it
      can be used as the boot device.  The phone is shipped with this 2k region
      configured as write-protected (can't be modified) and programmed with an initial
      program loader (IPL).  At power-up, this IPL loads the contents of two flash
      blocks to SDRAM and jumps to it.  The capacity of the two blocks is not large
      enough to hold all of u-boot, so a u-boot SPL is used.  To conserve flash space,
      these two blocks and the necessary number of subsequent blocks are programmed
      with a concatenated spl + u-boot image.  That way, the IPL will also load a
      portion of u-boot proper, and when the spl runs, it relocates the portion of
      u-boot that the IPL has already loaded, and then resumes loading the remaining
      part of u-boot before jumping to it.
      The default_environment is used (CONFIG_ENV_IS_NOWHERE) because I didn't think
      that having a writable environment was worth the cost of a flash block, although
      adding it would be straightforward.  I abuse the CONFIG_EXTRA_ENV_SETTINGS
      option to specify the usbtty for the console (CONFIG_SYS_CONSOLE_IS_IN_ENV).
      Support for the LCD is included, but currently it is only useful for displaying
      the u-boot splash screen.  But if u-boot is built without the usbtty console, it
      does display the auto-boot progress nicely.
      Signed-off-by: default avatarMike Dunn <mikedunn@newsguy.com>
  4. 26 Oct, 2012 1 commit
  5. 01 Sep, 2012 1 commit
  6. 08 Dec, 2011 1 commit
  7. 29 Nov, 2011 1 commit
  8. 27 Nov, 2011 1 commit
  9. 07 Sep, 2011 2 commits
  10. 28 Jul, 2011 1 commit
  11. 26 Nov, 2010 2 commits
  12. 18 Oct, 2010 1 commit
    • Wolfgang Denk's avatar
      logodl: remove code for yet another corpse · 059e7782
      Wolfgang Denk authored
      The logodl board has long been unmaintained and left broken.
      As obviously nobody is interestedin that code any more, we may as well
      remove it.
      Signed-off-by: default avatarWolfgang Denk <wd@denx.de>
      Cc: August Hoeraendl <august.hoerandl@gmx.at>
      Cc: Robert Schwebel <r.schwebel@pengutronix.de>
      Cc: Marek Vasut <marek.vasut@gmail.com>
  13. 09 Apr, 2010 1 commit
  14. 24 Mar, 2010 1 commit
  15. 15 May, 2009 1 commit
  16. 24 Oct, 2008 1 commit
  17. 05 Sep, 2008 1 commit
    • Ricardo Ribalda Delgado's avatar
      ppc44x: Unification of virtex5 pp440 boards · e07f4a80
      Ricardo Ribalda Delgado authored
      This patch provides an unificated way of handling xilinx v5 ppc440 boards.
      It unificates 3 different things:
      1) Source code
      A new board called ppc440-generic has been created. This board includes
      a generic tlb initialization (Maps the whole memory into virtual) and
      defines board_pre_init, checkboard, initdram and get_sys_info weakly,
      so, they can be replaced by specific functions.
      If a new board needs to redefine any of the previous functions
      (specific initialization) it can create a new directory with the
      specific initializations needed. (see the example ml507 board).
      2) Configuration file
      Common configurations are located under configs/xilinx-ppc440.h, this
      header file interpretes the xparameters file generated by EDK and
      configurates u-boot in correspondence. Example: if there is a Temac,
      allows CMD_CONFIG_NET
      Specific configuration are located under specific configuration file.
      (see the example ml507 board)
      3) Makefile
      Some work has been done in order to not duplicate work in the Main
      Makefile. Please see the attached code.
      In order to support new boards they can be implemented in the next way:
      a) Simple Generic Board  (90% of the time)
      Using EDK generates a new xparameters.h file, replace
      ppc440-generic/xparameters.h  and run make xilinx-ppc440-generic_config
      && make
      b) Simple Boards with special u-boot parameters (9 % of the time)
      Create a new file under configs for it (use ml507.h as example) and
      change your paramaters. Create a new Makefile paragraph and compile
      c) Complex boards (1% of the time)
      Create a new folder for the board, like the ml507
      Finally, it adds support for the Avnet FX30T Evaluation board, following
      the new generic structure:
      Cheap board by Avnet for evaluating the Virtex5 FX technology.
      This patch adds support for:
       - UartLite
       - 16MB Flash
       - 64MB RAM
      Prior using U-boot in this board, read carefully the ERRATA by Avnet
      to solve some memory initialization issues.
      Signed-off-by: default avatarRicardo Ribalda Delgado <ricardo.ribalda@uam.es>
      Signed-off-by: default avatarStefan Roese <sr@denx.de>
  18. 20 Aug, 2008 1 commit
  19. 18 Jul, 2008 1 commit
    • Ricardo Ribalda Delgado's avatar
      ppc4xx: ML507 Board Support · 086511fc
      Ricardo Ribalda Delgado authored
      The Xilinx ML507 Board is a Virtex 5 prototyping board that includes,
      	among others:
      	-Virtex 5 FX FPGA (With a ppc440x5 in it)
      	-256MB of SDRAM2
      	-32MB of Flash
      	-I2C Eeprom
      	-System ACE chip
      	-Serial ATA connectors
      	-RS232 Level Conversors
      	-Ethernet Transceiver
      This patch gives support to a standard design produced by EDK for this
      board: ppc440, uartlite, xilinx_int and flash
      - Includes Changes propossed by Stefan Roese and Michal Simek
      Signed-off-by: default avatarRicardo Ribalda Delgado <ricardo.ribalda@uam.es>
      Acked-by: default avatarStefan Roese <sr@denx.de>
  20. 15 Jul, 2008 1 commit
  21. 09 Jul, 2008 1 commit
  22. 10 Jun, 2008 1 commit
  23. 31 Mar, 2008 1 commit
  24. 28 Mar, 2008 1 commit
  25. 24 Feb, 2008 1 commit
  26. 14 Feb, 2008 2 commits
  27. 17 Jan, 2008 1 commit
  28. 16 Jan, 2008 1 commit
  29. 08 Jan, 2008 1 commit
  30. 18 Aug, 2007 1 commit
  31. 17 Aug, 2007 1 commit
  32. 16 Aug, 2007 2 commits
  33. 10 Aug, 2007 2 commits
    • Sergey Kubushyn's avatar
      [ARM] TI DaVinci support, hopefully final · c74b2108
      Sergey Kubushyn authored
      Add support for the following DaVinci boards:
      - DV_EVM
      - SONATA
      - Split into separate board directories
      - Removed changes to MTD_DEBUG (or whatever it's called)
      - New CONFIG_CMD party line followed
      - Some cosmetic fixes, cleanup etc.
      - Patches against the latest U-Boot tree as of now.
      - Fixed CONFIG_CMD_NET in net files.
      - Fixed CONFIG_CMD_EEPROM for schmoogie.
      - Made sure it compiles and works (forceenv() link problem) on SCHMOOGIE and
         DV_EVM. Can't check if it works on SONATA, don't have a board any more,
         but it at least compiles.
      Here is an excerpt from session log on SCHMOOGIE...
      U-Boot 1.2.0-g6c33c785-dirty (Aug  7 2007 - 13:07:17)
      DRAM:  128 MB
      NAND:  128 MiB
      In:    serial
      Out:   serial
      Err:   serial
      ARM Clock : 297MHz
      DDR Clock : 162MHz
      ETH PHY   : DP83848 @ 0x01
      U-Boot > iprobe
      Valid chip addresses: 1B 38 3A 3D 3F 50 5D 6F
      U-Boot > ping
      host is alive
      U-Boot >
      Signed-off-by: default avatarSergey Kubushyn <ksi@koi8.net>
      Acked-by: default avatarDirk Behme <dirk.behme@gmail.com>
      Acked-by: default avatarZach Sadecki <Zach.Sadecki@ripcode.com>
      Acked-by: default avatarStefan Roese <sr@denx.de>
    • Niklaus Giger's avatar
      Add PPC4xx-HCU4 and HCU5 boards: Infrastructure · 641cca95
      Niklaus Giger authored
      This series of patches adds support for 2 boards from Netstal Maschinen.
      The HCU4 has a PPC405Gpr and
      the HCU5 has a PPC440EPX.
      The HCU4 has a somehow complicated flash setup, as the booteprom is
      only 8 bits and the CFI 16 bits wide, which makes it impossible to use a more
      elegant solution.
      The HCU5 has only a booteprom as the whole code will be downloaded from a
      different board which has HD, CD-ROM, etc and where all code is stored.
      This is my third try. I incorporated all suggestions made by Wolfgang and Stefan.
      Thanks them a lot.
      Signed-off-by: default avatarNiklaus Giger <niklaus.giger@netstal.com>
  34. 18 Jun, 2007 1 commit
    • TsiChung Liew's avatar
      Added M5329AFEE and M5329BFEE Platforms · 8e585f02
      TsiChung Liew authored
      Added board/freescale/m5329evb, cpu/mcf532x, drivers/net,
      drivers/serial,  immap_5329.h, m5329.h, mcfrtc.h,
      include/configs/M5329EVB.h, lib_m68k/interrupts.c, and
      Modified CREDITS, MAKEFILE, Makefile, README, common/cmd_bdinfo.c,
      common/cmd_mii.c, include/asm-m68k/byteorder.h, include/asm-m68k/fec.h,
      include/asm-m68k/io.h, include/asm-m68k/mcftimer.h,
      include/asm-m68k/mcfuart.h, include/asm-m68k/ptrace.h,
      include/asm-m68k/u-boot.h, lib_m68k/Makefile, lib_m68k/board.c,
      lib_m68k/time.c, net/eth.c and rtc/Makefile
      Signed-off-by: default avatarTsiChung Liew <Tsi-Chung.Liew@freescale.com>
  35. 13 May, 2007 1 commit