1. 06 Feb, 2016 1 commit
  2. 14 Oct, 2013 1 commit
  3. 16 Jan, 2013 4 commits
    • Daniel Schwierzeck's avatar
    • Daniel Schwierzeck's avatar
      MIPS: qemu-mips: update and fix example usage in README · 2b086ce4
      Daniel Schwierzeck authored
      By now U-Boot supports Qemu MIPS for little and big endian
      as well as 32 bit and 64 bit. Update and fix the example usage
      in the README to reflect this.
      Signed-off-by: 's avatarDaniel Schwierzeck <daniel.schwierzeck@gmail.com>
      2b086ce4
    • Gabor Juhos's avatar
      MIPS: qemu-mips: add '-M mips' switch to the example usage command · 3567e4ef
      Gabor Juhos authored
      Using the example command from the README file does
      not work as expected. qemu shows a text similar to
      the one below and it hangs.
      
          $ qemu-system-mips -L . -nographic
          Could not open option rom 'pxe-pcnet.rom': No such file or directory
          qemu-system-mips: pci_add_option_rom: failed to find romfile "vgabios-cirrus.bin"
          qemu: terminating on signal 15 from pid 19726
      
      This happens because qemu emulates a Malta board by
      default if the machine type is not defined explicitely
      on the command line.
      
      For a working test, the '-M mips' switch is required:
      
          $ qemu-system-mips -M mips -L . -nographic
          Could not open option rom 'vgabios.bin': No such file or directory
      
          U-Boot 2013.01-rc2-00132-g1e8e648-dirty (Jan 08 2013 - 09:06:42)
      
          Board: Qemu -M mips CPU: 24Kf proc_id=0x19300
          DRAM:  128 MiB
          ## Unknown flash on Bank 1 - Size = 0x00000000 = 0 MB
          Flash: 0 Bytes
          *** Warning - bad CRC, using default environment
      
          In:    serial
          Out:   serial
          Err:   serial
          Net:   NE2000
          Hit any key to stop autoboot:  0
          qemu-mips #
      Signed-off-by: 's avatarGabor Juhos <juhosg@openwrt.org>
      Cc: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
      Cc: Vlad Lungu <vlad.lungu@windriver.com>
      3567e4ef
    • Gabor Juhos's avatar
      MIPS: qemu-mips: fix a typo in README · 0f17f59c
      Gabor Juhos authored
      The 'Limitations & comments' section refers to the
      '-m mips' switch which is not valid. The '-m' switch
      can be used for setting the virtual RAM size:
      
          $qemu-system-mips --help | grep '^-m '
          -m megs         set virtual RAM size to megs MB [default=128]
          $
      
      The correct switch for specifying the machine type is '-M'.
      Fix the text to refer to that.
      Signed-off-by: 's avatarGabor Juhos <juhosg@openwrt.org>
      Cc: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
      Cc: Vlad Lungu <vlad.lungu@windriver.com>
      0f17f59c
  4. 29 Jul, 2012 1 commit
  5. 21 Aug, 2009 1 commit
  6. 09 May, 2008 1 commit
  7. 16 Jan, 2008 1 commit