1. 09 Mar, 2013 2 commits
    • Anatolij Gustschin's avatar
      mpc512x: add ifm ac14xx board · fcc7fe42
      Anatolij Gustschin authored
      Add new mpc5121e based ac14xx board and a new pinmux config
      function for setting individual pinmux bit groups. This
      function is used in ac14xx board code.
      Signed-off-by: default avatarAnatolij Gustschin <agust@denx.de>
    • Stefan Roese's avatar
      mpc5200: Add a4m2k board port · d4451d35
      Stefan Roese authored
      This patch adds the a4m2k MPC5200B board port. Its a derivate of
      the a3m071 board with only minor changes.
      Additionally this patch includes some clean-up changes:
      - Remove I2C support from a3m071 as its unused
      - Fix/enhance default env variables
      - Fix some comments
      - Add newly introduced CONFIG_SPL_TARGET to automatically build
      - Fix dtb patching in READ desciption for SPL Linux booting:
        "fdt chosen" needs to get called to patch/create the chosen node.
      - Add missing call to spl_board_init():
        Define CONFIG_SPL_BOARD_INIT so that spl_board_init() will get
        called in the SPL version.
      Signed-off-by: default avatarStefan Roese <sr@denx.de>
  2. 04 Mar, 2013 1 commit
  3. 15 Feb, 2013 3 commits
  4. 11 Feb, 2013 1 commit
  5. 07 Feb, 2013 2 commits
  6. 30 Jan, 2013 2 commits
    • Prabhakar Kushwaha's avatar
      powerpc/85xx: Add BSC9132QDS support · 41d91011
      Prabhakar Kushwaha authored
      BSC9132QDS is a Freescale reference design board for BSC9132 SoC.
      BSC9132 SOC is an integrated device that targets the evolving Microcell,
      Picocell, and Enterprise-Femto base station market subsegments.
      It combines Power Architecture e500v2 and DSP StarCore SC3850 core
      technologies with MAPLE-B2F baseband acceleration processing elements.
      BSC9132QDS Overview
        2Gbyte DDR3 (on board DDR), Dual Ranki
        32Mbyte 16bit NOR flash
        128Mbyte 2K page size NAND Flash
        256 Kbit M24256 I2C EEPROM
        128 Mbit SPI Flash memory
        SD slot
        eTSEC1: Connected to SGMII PHY
        eTSEC2: Connected to SGMII PHY
        I2C RTC
        DUART interface: supports one UARTs up to 115200 bps for console display
      Apart from the above it also consists various peripherals to support DSP
      This patch adds support for mainly Power side functionalities and peripherals
      Signed-off-by: default avatarNaveen Burmi <NaveenBurmi@freescale.com>
      Signed-off-by: default avatarPoonam Aggrwal <poonam.aggrwal@freescale.com>
      Signed-off-by: default avatarPrabhakar Kushwaha <prabhakar@freescale.com>
      Signed-off-by: default avatarAndy Fleming <afleming@freescale.com>
    • York Sun's avatar
      powerpc/b4860qds: Added Support for B4860QDS · b5b06fb7
      York Sun authored
      B4860QDS is a high-performance computing evaluation, development and
      test platform supporting the B4860 QorIQ Power Architecture processor.
      B4860QDS Overview
      - DDRC1: Ten separate DDR3 parts of 16-bit to support 72-bit (ECC) at 1866MT/s,
        ECC, 4 GB of memory in two ranks of 2 GB.
      - DDRC2: Five separate DDR3 parts of 16-bit to support 72-bit (ECC) at 1866MT/s,  ECC, 2 GB of memory. Single rank.
      - SerDes 1 multiplexing: Two Vitesse (transmit and receive path) cross-point
        16x16 switch VSC3316
      - SerDes 2 multiplexing: Two Vitesse (transmit and receive path) cross-point
        8x8 switch VSC3308
      - USB 2.0 ULPI PHY USB3315 by SMSC supports USB port in host mode.
      - B4860 UART port is available over USB-to-UART translator USB2SER or over
        RS232 flat cable.
      - A Vitesse dual SGMII phy VSC8662 links the B4860 SGMII lines to 2xRJ-45 copper
        connectors for Stand-alone mode and to the 1000Base-X over AMC MicroTCA
        connector ports 0 and 2 for AMC mode.
      - The B4860 configuration may be loaded from nine bits coded reset
        configuration reset source. The RCW source is set by appropriate
      - 16-bit NOR Flash / PROMJet
      - QIXIS 8-bit NOR Flash Emulator
      - 8-bit NAND Flash
      - 24-bit SPI Flash
      - Long address I2C EEPROM
      - Available debug interfaces are:
      	- On-board eCWTAP controller with ETH and USB I/F
      	- JTAG/COP 16-pin header for any external TAP controller
      	- External JTAG source over AMC to support B2B configuration
      	- 70-pin Aurora debug connector
      - QIXIS (FPGA) logic:
      	- 2 KB internal memory space including
      - IDT840NT4 clock synthesizer provides B4860 essential clocks : SYSCLK,
        DDRCLK1, 2 and RTCCLK.
      - Two 8T49N222A SerDes ref clock devices support two SerDes port clocks
        - total four refclk, including CPRI clock scheme
      Signed-off-by: default avatarYork Sun <yorksun@freescale.com>
      Signed-off-by: default avatarPrabhakar Kushwaha <prabhakar@freescale.com>
      Signed-off-by: default avatarShaveta Leekha <shaveta@freescale.com>
      Signed-off-by: default avatarPriyanka Jain <Priyanka.Jain@freescale.com>
      Signed-off-by: default avatarPoonam Aggrwal <poonam.aggrwal@freescale.com>
      Signed-off-by: default avatarRoy Zang <tie-fei.zang@freescale.com>
      Signed-off-by: default avatarSandeep Singh <Sandeep@freescale.com>
      Signed-off-by: default avatarAndy Fleming <afleming@freescale.com>
  7. 28 Jan, 2013 1 commit
  8. 21 Jan, 2013 1 commit
  9. 16 Jan, 2013 1 commit
  10. 12 Jan, 2013 1 commit
  11. 08 Jan, 2013 1 commit
  12. 20 Dec, 2012 1 commit
  13. 19 Dec, 2012 2 commits
  14. 06 Dec, 2012 1 commit
    • Gabe Black's avatar
      x86: Override calculate_relocation_address to use the e820 map · 112a575e
      Gabe Black authored
      Because calculate_relocation_address now uses the e820 map, it will be able
      to avoid addresses over 32 bits and regions that are at high addresses but
      not big enough for U-Boot. It also means we can remove the hack which
      limitted U-Boot's idea of the size of memory to less than 4GB.
      Also take into account the space needed for the heap and stack, so we avoid
      picking a very small region those areas might overlap with something it
      Signed-off-by: default avatarGabe Black <gabeblack@chromium.org>
      Signed-off-by: default avatarSimon Glass <sjg@chromium.org>
  15. 05 Dec, 2012 1 commit
  16. 28 Nov, 2012 1 commit
  17. 27 Nov, 2012 1 commit
  18. 14 Nov, 2012 1 commit
  19. 30 Oct, 2012 2 commits
  20. 29 Oct, 2012 1 commit
  21. 28 Oct, 2012 1 commit
  22. 26 Oct, 2012 1 commit
    • Stefano Babic's avatar
      MX35: add support for woodburn board · d81b27a2
      Stefano Babic authored
      The woodburn board is based on the MX35 SOC.
      Support for both external (NOR) and internal
      (SD Card) boot mode are added. It uses the
      generic SPL framework to implement the internal boot
      The following peripherals are supported:
      - Ethernet (FEC)
      - SD Card
      - NAND (512 MB)
      - NOR Flash
      In the internal boot mode, a simple imximage header
      is generated to set the address in internal RAM
      where the SOC must copy the SPL code. The initial setup
      is then demanded to the SPL itself.
      Signed-off-by: default avatarStefano Babic <sbabic@denx.de>
  23. 25 Oct, 2012 1 commit
  24. 24 Oct, 2012 1 commit
  25. 23 Oct, 2012 1 commit
  26. 22 Oct, 2012 1 commit
  27. 17 Oct, 2012 2 commits
  28. 16 Oct, 2012 2 commits
    • Zhi-zhou Zhang's avatar
      MIPS: add board qemu-mips64 support · 32afad78
      Zhi-zhou Zhang authored
      Both big-endian and little-endian are tested with below commands:
      Rom version: (Default, Now we config it as rom version)
      qemu-system-mips64el -M mips -bios u-boot.bin -cpu MIPS64R2-generic -nographic
      qemu-system-mips64 -M mips -bios u-boot.bin -cpu MIPS64R2-generic -nographic
      Ram version:
      qemu-system-mips64el -M mips -cpu MIPS64R2-generic -kernel u-boot -nographic
      qemu-system-mips64 -M mips -cpu MIPS64R2-generic -kernel u-boot -nographic
      Signed-off-by: default avatarZhizhou Zhang <etou.zh@gmail.com>
      Signed-off-by: default avatarDaniel Schwierzeck <daniel.schwierzeck@gmail.com>
    • Łukasz Dałek's avatar
      h2200: Add support for iPAQ h2200 palmtop · 34cda7a0
      Łukasz Dałek authored
      Add basic support for HP iPAQ h2200 palmtop. h2200 palmtop was targeted
      to general consumers. It has 64 MB of RAM, 32 MB flash. No intergrated
      Wi-Fi nor Ethernet. Based on Intel PXA255 processor. It was shipped with
      Windows CE 4.2 operating system.
      Signed-off-by: default avatarLukasz Dalek <luk0104@gmail.com>
  29. 15 Oct, 2012 3 commits