- 10 Nov, 2010 1 commit
-
-
Kumar Gala authored
When P2020DS DDR2 was merged it was merged incorrectly and propogated to boards.cfg. Fix this by moving DDR2 config to be associated with P2020DS and not P1_P2_RDB. Signed-off-by:
Kumar Gala <galak@kernel.crashing.org>
-
- 26 Oct, 2010 1 commit
-
-
Mike Frysinger authored
Now that the boards.cfg file supports options to mkconfig, we can move the bf527-ezkit-v2 target out of the Makefile and into boards.cfg. Signed-off-by:
Mike Frysinger <vapier@gentoo.org>
-
- 25 Oct, 2010 1 commit
-
-
Dirk Eibach authored
Board support for the Guntermann & Drunck CATCenter Io. Board support for the Guntermann & Drunck IoCon. Signed-off-by:
Dirk Eibach <eibach@gdsys.de> Signed-off-by:
Stefan Roese <sr@denx.de>
-
- 24 Oct, 2010 1 commit
-
-
Wolfgang Denk authored
The 100MHz configuation of the VoVPN-GW has never been supported, so drop it now. Signed-off-by:
Wolfgang Denk <wd@denx.de>
-
- 22 Oct, 2010 2 commits
-
-
John Schmoller authored
Initial support for Extreme Engineering Solutions XPedite5500 - a P2020-based PMC/XMC single board computer. Signed-off-by:
John Schmoller <jschmoller@xes-inc.com> Signed-off-by:
Peter Tyser <ptyser@xes-inc.com> Signed-off-by:
Kumar Gala <galak@kernel.crashing.org>
-
Peter Tyser authored
Some U-Boot images for X-ES boards support multiple products in the same family. For example, the XPedite5370, XPedite5371, and XPedite5372 are similar enough that one U-Boot image can work on all 3 cards. To make it clear that a U-Boot image can work on boards of the same family, rename the boards with the least significant digit of 'x'. While we're at it, change the board config file and make targets to be lowercase. Also change the default uImage and fdt filenames to "board.uImage" and "board.dtb" to be more generic. Signed-off-by:
Peter Tyser <ptyser@xes-inc.com> Signed-off-by:
Kumar Gala <galak@kernel.crashing.org>
-
- 21 Oct, 2010 6 commits
-
-
Marek Vasut authored
This board is broken and it's not possible to repair it. Signed-off-by:
Marek Vasut <marek.vasut@gmail.com>
-
Marek Vasut authored
This board is broken and impossible to repair without deep knowledge or availability of the hardware. Signed-off-by:
Marek Vasut <marek.vasut@gmail.com>
-
Marek Vasut authored
Signed-off-by:
Marek Vasut <marek.vasut@gmail.com>
-
Nobuhiro Iwamatsu authored
Move the sh4 target boards out of the Makefile and into boards.cfg. And fix sh4 of MAKEALL. Signed-off-by:
Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
Nobuhiro Iwamatsu authored
Move the sh3 target boards out of the Makefile and into boards.cfg. And fix sh3 of MAKEALL. Signed-off-by:
Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
Nobuhiro Iwamatsu authored
Move the rsk7203 target out of the Makefile and into boards.cfg. And fix sh2 of MAKEALL. Signed-off-by:
Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
- 19 Oct, 2010 9 commits
-
-
Mike Frysinger authored
The "options" field at the moment is only documented in the changelog which isn't terribly useful to people without git. Signed-off-by:
Mike Frysinger <vapier@gentoo.org>
-
Kristoffer Ericson authored
This patch adds support for the HP Jornada flashboards that were made in 2008. Older flashroms should work if memory registers are adjusted. Signed-off-by:
Kristoffer Ericson <kristoffer.ericson@gmail.com> Adpted for TEXT_BASE -> CONFIG_SYS_TEXT_BASE rename. Removed now redundant board/jornada/config.mk file. Removed unused empty jornada_init() function to silence "jornada.c:35: warning: 'jornada_init' defined but not used" Signed-off-by:
Wolfgang Denk <wd@denx.de>
-
Marek Vasut authored
Signed-off-by:
Marek Vasut <marek.vasut@gmail.com>
-
Marek Vasut authored
Signed-off-by:
Marek Vasut <marek.vasut@gmail.com>
-
Marek Vasut authored
The following hardware is currently supported: - UART - USB Host - FPGA Signed-off-by:
Marek Vasut <marek.vasut@gmail.com>
-
Marek Vasut authored
Signed-off-by:
Marek Vasut <marek.vasut@gmail.com>
-
Marek Vasut authored
This patch adds support for the Palm Tungsten|C PXA255 board. The support includes: - LCD - MMC - UART - NOR Signed-off-by:
Marek Vasut <marek.vasut@gmail.com>
-
Andreas Bießmann authored
This patch removes some functionality from at91rm9200ek board but the remaining functionality does now work with newer at91 code and arm-relocation. Currently missing features are: - dataflash booting (due to missing HW for testing) - MMC/SD-Card - first stage bootloader support is completely removed (not needed for NOR) Cause this board was (some days ago) reference for all at91rm9200 based boards this should be a good starting point to convert all remaining at91rm9200 borads to at91 code. Aside from that this is a good base to get some drivers between at91sam/at91rm/avr32 merged. Signed-off-by:
Andreas Bießmann <andreas.devel@googlemail.com> Signed-off-by:
Reinhard Meyer <u-boot@emk-elektronik.de>
-
Wolfgang Denk authored
The NC650 / CP850 boards have long been unmaintained and left broken. As obviously nobody is interested in that code any more, we may as well remove it. Signed-off-by:
Wolfgang Denk <wd@denx.de>
-
- 18 Oct, 2010 4 commits
-
-
Wolfgang Denk authored
Clean up Makefile, and drop a lot of the config.mk files on the way. We now also automatically pick all boards that are listed in boards.cfg (and with all configurations), so we can drop the redundant entries from MAKEALL to avoid building these twice. Signed-off-by:
Wolfgang Denk <wd@denx.de>
-
Marek Vasut authored
There are some boards where it's currently not possible to detect all board information at runtime, therefore a new column was added to boards.cfg . This column can contain multiple options: a board configuration name, optionally followed by a colon (':') and a list of options, which are separated by comma (','). In case of simple options like '256M_U_BOOT', these expand to "#define CONFIG_MK_256M_U_BOOT 1" in config.h . In case of assignments like 'RAM=8192', these expand to "#define CONFIG_MK_RAM 8192" in config.h . Example: FOO:HAS_BAR,BAZ=64 means: - the name of the board config file is include/configs/FOO.h - the generated file include/config.h will contain these lines: #define CONFIG_HAS_BAR 1 #define CONFIG_BAZ 64 Signed-off-by:
Marek Vasut <marek.vasut@gmail.com> [wd@denx.de: edited commit message; added code to deal with an optional board configuration name] Signed-off-by:
Wolfgang Denk <wd@denx.de>
-
Wolfgang Denk authored
The logodl board has long been unmaintained and left broken. As obviously nobody is interestedin that code any more, we may as well remove it. Signed-off-by:
Wolfgang Denk <wd@denx.de> Cc: August Hoeraendl <august.hoerandl@gmx.at> Cc: Robert Schwebel <r.schwebel@pengutronix.de> Cc: Marek Vasut <marek.vasut@gmail.com>
-
Jason Liu authored
Rename mx51 to mx5 in order to support more mx51 like-style SOCs such as MX53 and the followings. Signed-off-by:
Jason Liu <r64343@freescale.com>
-
- 17 Oct, 2010 2 commits
-
-
Enric Balletbo i Serra authored
The IGEP module is a low-power, high performance production-ready system-on-module (SOM) based on TI's OMAP3 family.The IGEP module solution based upon TI OMAP3 provides a low-power/low-cost platform for a variety of consumer/industrial/medical devices. Signed-off-by:
Enric Balletbo i Serra <eballetbo@gmail.com> Signed-off-by:
Sandeep Paulraj <s-paulraj@ti.com>
-
Enric Balletbo i Serra authored
The IGEP v2 board is a low-cost, fan-less and industrial temperature range single board computer that unleashes laptop-like performance and expandability without the bulk, expense, or noise of typical desktop machines. Its architecture shares much in common with other OMAP3 boards. Signed-off-by:
Enric Balletbo i Serra <eballetbo@gmail.com> Acked-by:
Steve Sakoman <steve.sakoman@linaro.org> Tested-by:
Steve Sakoman <steve.sakoman@linaro.org> Signed-off-by:
Sandeep Paulraj <s-paulraj@ti.com>
-
- 13 Oct, 2010 1 commit
-
-
Matt Waddel authored
Adds support for the ARM quad-core Cortex-A9 processor This system includes a motherboard(Versatile Express), daughterboard (Coretile), and SOC(Cortex-A9 quad core). The serial port, ethernet, and flash systems work with these additions. The naming convention is: SOC -> CortexA9 quad core = ca9x4 daughterboard -> Coretile = ct motherboard -> Versatile Express = vxp This gives ca9x4_ct_vxp.c as the board support file. Signed-off-by:
Matt Waddel <matt.waddel@linaro.org>
-
- 12 Oct, 2010 1 commit
-
-
Sergei Poselenov authored
This patch provides support for the A4M072 board with the following features: UART NOR flash FEC Ethernet External SRAM I2C EEPROM CompactFlash cards on IDE/ATA port USB Host PCI initialization The 7-segment LED indicator is not yet supported. Signed-off-by:
Sergei Poselenov <sposelenov@emcraft.com>
-
- 07 Oct, 2010 1 commit
-
-
Stefano Babic authored
The patch adds support for TTECH vision2 board. The board has 512MB RAM, SDHC slot and 4MB SPI device from StMicron. Signed-off-by:
Stefano Babic <sbabic@denx.de>
-
- 06 Oct, 2010 2 commits
-
-
Wolfgang Denk authored
The CCM board has long reached EOL, and support for it is no longer relevant in current versions of U-Boot. Remove it. Signed-off-by:
Wolfgang Denk <wd@denx.de>
-
Wolfgang Denk authored
The PCU_E board has long reached EOL, and support for it is no longer relevant in current versions of U-Boot. Remove it. Signed-off-by:
Wolfgang Denk <wd@denx.de>
-
- 04 Oct, 2010 2 commits
-
-
Tirumala Marri authored
Add support code for bluestone board wth APM821XX processor based. This patch includes early board init, misc init, configure EBC, initializes UIC, MAKEALL, board.cfg and MAINTAINERS file. Signed-off-by: Tirumala R Marri <tmarri@apm.com Signed-off-by:
Stefan Roese <sr@denx.de>
-
Wolfgang Denk authored
Signed-off-by:
Wolfgang Denk <wd@denx.de> Cc: Heiko Schocher <hs@denx.de> Cc: Stefan Roese <sr@denx.de> Cc: Roderik Wildenburg <roderik.wildenburg@manroland.com>
-
- 02 Oct, 2010 3 commits
-
-
Wojtek Skulski authored
The board includes: * ADSP-BF561 rev. 0.5 * 32-bit SDRAM (2 * MT48LC16M16A2TG or MT48LC32M16A2TG) * Gigabit Ether AX88180 (ASIX) + 88E1111 rev. B2 (Marvell) * SPI boot flash on PF2 (M25P64 8MB, or M25P128 16 MB) * FPGA boot flash on PF3 (M25P64 8MB, or M25P128 16 MB) * Spartan6-LX150 (memory-mapped; both PPIs also connected) * See http://www.skutek.com/Signed-off-by:
Wojtek Skulski <skulski@pas.rochester.edu> Signed-off-by:
Mike Frysinger <vapier@gentoo.org>
-
Peter Meerwald authored
Signed-off-by:
Peter Meerwald <pmeerw@pmeerw.net> Signed-off-by:
Mike Frysinger <vapier@gentoo.org>
-
Mike Frysinger authored
Support for the Blackfin System Development Platform (SDP) base module. Signed-off-by:
Mike Frysinger <vapier@gentoo.org>
-
- 23 Sep, 2010 1 commit
-
-
Ilya Yanok authored
This patch provides support for MPC8308 P1M board with the following set of features: Dual UART is supported NOR flash is supported Both TSEC Ethernet controllers are supported PCI Express initialization is supported Both I2C controllers are supported Signed-off-by:
Ilya Yanok <yanok@emcraft.com> Signed-off-by:
Kim Phillips <kim.phillips@freescale.com>
-
- 19 Sep, 2010 2 commits
-
-
Wolfgang Denk authored
Recent changes caused that the spieval board now is included in the boards built by MAKEALL, which revealed that compilation for this board has been broken for a long time: mpc5xxx_fec.c:899:2: error: #error fec->xcv_type not initialized. mpc5xxx_fec.c:899:2: error: #error fec->xcv_type not initialized. The board is orphaned. Drop support for it. Signed-off-by:
Wolfgang Denk <wd@denx.de>
-
Wolfgang Denk authored
Recent changes caused that the smmaco4 board now is included in the boards built by MAKEALL, which revealed that compilation for this board has been broken for a long time: mpc5xxx_fec.c:899:2: error: #error fec->xcv_type not initialized. The board is orphaned. Drop support for it. Signed-off-by:
Wolfgang Denk <wd@denx.de>
-