- 29 Mar, 2016 1 commit
-
-
Saksham Jain authored
Sec_init has been called at the beginning to initialize SEC Block (CAAM) which is used by secure boot validation later for both ls2080a qds and rdb. 64-bit address in ESBC Header has been enabled. Secure boot defconfigs are created for boards (NOR boot). Signed-off-by:
Saksham Jain <saksham.jain@nxp.com> Reviewed-by:
York Sun <york.sun@nxp.com>
-
- 14 Mar, 2016 1 commit
-
-
Simon Glass authored
There are already two FIT options in Kconfig but the CONFIG options are still in the header files. We need to do a proper move to fix this. Move these options to Kconfig and tidy up board configuration: CONFIG_FIT CONFIG_OF_BOARD_SETUP CONFIG_OF_SYSTEM_SETUP CONFIG_FIT_SIGNATURE CONFIG_FIT_BEST_MATCH CONFIG_FIT_VERBOSE CONFIG_OF_STDOUT_VIA_ALIAS CONFIG_RSA Unfortunately the first one is a little complicated. We need to make sure this option is not enabled in SPL by this change. Also this option is enabled automatically in the host builds by defining CONFIG_FIT in the image.h file. To solve this, add a new IMAGE_USE_FIT #define which can be used in files that are built on the host but must also build for U-Boot and SPL. Note: Masahiro's moveconfig.py script is amazing. Signed-off-by:
Simon Glass <sjg@chromium.org> [trini: Add microblaze change, various configs/ re-applies] Signed-off-by:
Tom Rini <trini@konsulko.com>
-
- 30 Nov, 2015 2 commits
-
-
Prabhakar Kushwaha authored
Freescale's LS2085A is a another personality of LS2080A SoC with support of AIOP and DP-DDR. This Patch adds support of LS2085A Personality. Signed-off-by:
Pratiyush Mohan Srivastava <pratiyush.srivastava@freescale.com> Signed-off-by:
Prabhakar Kushwaha <prabhakar@freescale.com> [York Sun: Updated MAINTAINERS files Dropped #ifdef in cpu.h Add CONFIG_SYS_NS16550=y in defconfig] Reviewed-by:
York Sun <yorksun@freescale.com>
-
Prabhakar Kushwaha authored
LS2080A is a prime personality of Freescale’s LS2085A. It is a non-AIOP personality without support of DP-DDR, L2 switch, 1588, PCIe endpoint etc. So renaming existing LS2085A code base to reflect LS2080A (Prime personality) Signed-off-by:
Pratiyush Mohan Srivastava <pratiyush.srivastava@freescale.com> Signed-off-by:
Prabhakar Kushwaha <prabhakar@freescale.com> [York Sun: Dropped #ifdef in cpu.c for cpu_type_list] Reviewed-by:
York Sun <yorksun@freescale.com>
-
- 22 Nov, 2015 1 commit
-
-
Thomas Chou authored
Move CONFIG_SYS_NS16550 to Kconfig, and run moveconfig.py. Signed-off-by:
Thomas Chou <thomas@wytron.com.tw>
-
- 29 Oct, 2015 1 commit
-
-
Prabhakar Kushwaha authored
Add support of setting RANDOM MAC address if env variable not available. Signed-off-by:
Prabhakar Kushwaha <prabhakar@freescale.com> Reviewed-by:
Bin Meng <bmeng.cn@gmail.com> Reviewed-by:
York Sun <yorksun@freescale.com>
-
- 28 Sep, 2015 1 commit
-
-
Bin Meng authored
Some boards' defconfigs are disordered. Reorder them. Signed-off-by:
Bin Meng <bmeng.cn@gmail.com>
-
- 21 Aug, 2015 1 commit
-
-
Simon Glass authored
Move config for the E1000 Ethernet driver to Kconfig and tidy up affected boards. Signed-off-by:
Simon Glass <sjg@chromium.org> Acked-by:
Joe Hershberger <joe.hershberger@ni.com>
-
- 20 Jul, 2015 1 commit
-
-
Haikun.Wang@freescale.com authored
Freescale DSPI driver has been converted to Driver Model. The new driver depends on OF_CONTROL, DM, DM_SPI. This patch enable FSL_DSPI and its dependence configure options. Signed-off-by:
Haikun Wang <haikun.wang@freescale.com> Reviewed-by:
York Sun <yorksun@freescale.com>
-
- 26 Jun, 2015 1 commit
-
-
Joe Hershberger authored
This sets the default commands Kconfig to match include/config_cmd_default.h commands in the common/Kconfig and removes them from include/configs. Signed-off-by:
Joe Hershberger <joe.hershberger@ni.com> [trini: rastaban, am43xx_evm_usbhost_boot, am43xx_evm_ethboot updates] Signed-off-by:
Tom Rini <trini@konsulko.com>
-
- 01 Jun, 2015 1 commit
-
-
Joe Hershberger authored
This also selects CONFIG_NET for any CONFIG_CMD_NET board. Remove the imx default for CONFIG_NET. This moves the config that was defined by 60296a83 (commands: add more command entries in Kconfig). Signed-off-by:
Joe Hershberger <joe.hershberger@ni.com>
-
- 12 May, 2015 1 commit
-
-
Joe Hershberger authored
In order to reduce merge conflicts and to maintain the simplest possible defconfig files, we should be using the savedefconfig feature of Kconfig every time a new feature is added. This keeps the defconfig settings to a minimum (only those things not default) and keeps them in the same order as the Kconfig options. Signed-off-by:
Joe Hershberger <joe.hershberger@ni.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by:
Stephen Warren <swarren@wwwdotorg.org> Cc: Tom Rini <trini@konsulko.com>
-
- 23 Apr, 2015 1 commit
-
-
York Sun authored
The LS2085ARDB is a evaluation platform that supports LS2085A family SoCs. This patch add sbasic support for the platform. Signed-off-by:
York Sun <yorksun@freescale.com> Signed-off-by:
Prabhakar Kushwaha <prabhakar@freescale.com> Signed-off-by:
Bhupesh Sharma <bhupesh.sharma@freescale.com> Signed-off-by:
Scott Wood <scottwood@freescale.com>
-
- 25 Sep, 2014 1 commit
-
-
York Sun authored
LS1021AQDS has a variant with DDR4 slot. This patch adds a new defconfig for this variant to enable DDR4 support. RAW timing parameters are not added for DDR4. The board timing parameters are only tuned for single- rank 1600 and 1800MT/s with Micron DIMM 9ASF51272AZ-2G1A1 due to DIMM availability. Signed-off-by:
York Sun <yorksun@freescale.com> CC: Alison Wang <alison.wang@freescale.com>
-
- 08 Sep, 2014 1 commit
-
-
Wang Huan authored
LS102xA is an ARMv7 implementation. This patch is to add basic support for LS1021AQDS board. One DDR controller DUART1 is used as the console For the detail board information, please refer to README. Signed-off-by:
Alison Wang <alison.wang@freescale.com> Signed-off-by:
Jason Jin <jason.jin@freescale.com> Signed-off-by:
York Sun <yorksun@freescale.com> Signed-off-by:
Yuan Yao <yao.yuan@freescale.com> Signed-off-by:
Prabhakar Kushwaha <prabhakar@freescale.com>
-